Hi, Thank you very much for the reply. yes I tried it (what you have mentioned). but the problem is in the wap box console it says
DEBUG: PPG: too early to push the message, waiting DEBUG: PPG: send_push_response: telling pi DEBUG: HTTP: Resetting HTTPClient for `127.0.0.1'. INFO: PPG: handle_push_message: push message accepted for processing DEBUG: HTTP: Destroying HTTPClient area 0x81b3720. DEBUG: HTTP: Destroying HTTPClient for `127.0.0.1'. But there is no indication that it is sent to the simulator. I am bit confused whether my pushkannel.conf configuration is wrong. Could you please give me a appropriate configuration file if you can? Thanks in advance, Regards, Jeyakumaran On Fri, 2005-01-14 at 18:48, Aarno SyvÃnen wrote: > You just send usual ppg document. But remember use ip address, and csd > bearer. > > Aarno > > On 13.1.2005, at 12:04, Chandrasegaram Jeyakumaran wrote: > > > Hi all, > > > > I am new to kannel. I wanted to set up a push proxy gateway and test. > > I have done the configuration part as ppg running it seems. > > > > I want push messages to a nokia emulator(Whatever) without an smsc. > > > > How can I push message to an emulator using kannel ppg . The emulator > > is > > running in the local machine and the ppg too. > > > > Can you please give me the guide lines please. I went through the > > userguide. There is way saying. But it is not adequate it seems. > > > > Could you please help me? > > > > Thanks in advance . > > > > Regards, > > Jeyakumaran. > > > > -- > > Jeyakumaran Chandrasegaram, Software Engineer > > BeyondM (PVT) Ltd (a hSenid Company) > > Telephone+94-11-2625695 Mobile: +94-776-244290 Web: www.hsenid.com > > YahooID: jkumaranc > > mobilizing your enterprise > > > > **** DISCLAIMER ***** This e-mail and any attachments there to are > > intended for the sole use of the recipient(s) named above and may > > contain information that is confidential and/or proprietary to the > > hSenid Software International (Pvt.) Ltd. Any use of the information > > contained herein (including, but not limited to, total or partial > > reproduction, communication, or dissemination in any form) by persons > > other than the intended recipient(s) is prohibited. If you have > > received > > this e-mail in error, please notify the sender immediately and delete > > it. > > > > > > > >
