Try to set: enable-hwhs = "AT\\Q3" in your group=modems.
This is the configuration parameter that needs to be set in your kannel.conf. Just the value of it (AT\\Q3) may be different for the Nokia. Double check the Nokia AT reference guide for more info. Rene Kluwen Chimit > On Thu, Aug 11, 2005 at 11:04:28PM +0200, George C wrote: >> re: cannot enable hardware handshake >> >> Hello, >> >> Anyone have some feedback with what I may need to configure .conf >> with to >> eliminate this error with 9210? >> >> 2005-08-11 20:47:31 [14478] [6] INFO: AT2[nokia_smsc]: init device >> 2005-08-11 20:47:31 [14478] [6] INFO: AT2[nokia_smsc]: speed set to >> 19200 >> 2005-08-11 20:47:31 [14478] [6] DEBUG: AT2[nokia_smsc]: --> ATZ^M >> 2005-08-11 20:47:32 [14478] [6] DEBUG: AT2[nokia_smsc]: <-- OK >> 2005-08-11 20:47:32 [14478] [6] DEBUG: AT2[nokia_smsc]: --> AT^M >> 2005-08-11 20:47:32 [14478] [6] DEBUG: AT2[nokia_smsc]: <-- AT >> 2005-08-11 20:47:32 [14478] [6] DEBUG: AT2[nokia_smsc]: <-- OK >> 2005-08-11 20:47:32 [14478] [6] DEBUG: AT2[nokia_smsc]: --> AT&F^M >> 2005-08-11 20:47:32 [14478] [6] DEBUG: AT2[nokia_smsc]: <-- AT&F >> 2005-08-11 20:47:32 [14478] [6] DEBUG: AT2[nokia_smsc]: <-- OK >> 2005-08-11 20:47:32 [14478] [6] DEBUG: AT2[nokia_smsc]: --> ATE0^M >> 2005-08-11 20:47:32 [14478] [6] DEBUG: AT2[nokia_smsc]: <-- ATE0 >> 2005-08-11 20:47:32 [14478] [6] DEBUG: AT2[nokia_smsc]: <-- OK >> 2005-08-11 20:47:32 [14478] [6] DEBUG: AT2[nokia_smsc]: --> >> AT+IFC=2,2^M >> 2005-08-11 20:47:33 [14478] [6] DEBUG: AT2[nokia_smsc]: <-- ERROR >> 2005-08-11 20:47:33 [14478] [6] INFO: AT2[nokia_smsc]: cannot enable >> hardware handshake >> 2005-08-11 20:47:33 [14478] [6] DEBUG: AT2[nokia_smsc]: --> >> AT+CPIN?^M >> 2005-08-11 20:47:33 [14478] [6] DEBUG: AT2[nokia_smsc]: <-- ERROR >> 2005-08-11 20:47:33 [14478] [6] ERROR: AT2[nokia_smsc]: Opening >> failed. > seems as if your communicator doesn't support entering the pin via at > interface. > you shoult set no-pin to true in the modem definition. >> Terminating >> 2005-08-11 20:47:33 [14478] [6] INFO: AT2[nokia_smsc]: closing device >> 2005-08-11 20:47:33 [14478] [6] INFO: AT2[nokia_smsc]: opening device >> 2005-08-11 20:47:33 [14478] [6] DEBUG: AT2[nokia_smsc]: device opened >> 2005-08-11 20:47:33 [14478] [6] DEBUG: AT2[nokia_smsc]: device opened >> >> # SMSC CONNECTIONS >> >> group = smsc >> smsc-id = nokia_smsc >> smsc = "at" >> modemtype = "9110" >> device = "/dev/ttyS0" >> speed = 19200 port >> validityperiod = 167 >> keepalive = 60 >> sms-center = "+31881000" >> >> group = modems >> id = 9110 >> name = "Nokia 9110/9210" >> detect-string = Nokia >> init-string = "AT+CNMI=0,0,0,0,0" >> >> Regards >> George >> >> >> ----- Original Message ----- >> From: [1]George C >> To: [EMAIL PROTECTED] >> Sent: Thursday, August 11, 2005 11:03 PM >> Subject: Nokia 911/ 9210 kannel.conf info needed >> Hello, >> >> Will anyway have handy the kannel.conf information for using as >> SMSc >> /GSM modem the Nokia 9110 or 9210 communicator? >> >> Thank you & greatly appreciate it. >> >> George C >> >> >> References >> >> Visible links >> 1. [EMAIL PROTECTED] >> mailto:[EMAIL PROTECTED] >> 2. users@kannel.org >> mailto:users@kannel.org > > -- > > >
