|
Hi all Is there
anybody knowledgeable about this issue? If anybody could really configure the
Kannel PPG and used the Nokia 7210 simulator to receive the PUSH messages,
COULD THEY BE SUCCESSFUL? Please respond. Thanks Ajay From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ajay Kanukuntla Hi I could
resolve this problem myself today J Though I still
have another issue that, the PUSH message is not delivered to my Nokia 7210 SDK
simulator. The wapbox
console trace is given below. 2006-01-25
20:09:29 [30875] [14] INFO: PPG: Accept request </wappush> from
<127.0.0.1> 2006-01-25
20:09:29 [30875] [14] DEBUG: PPG: http_read_thread: pap multipart accepted 2006-01-25
20:09:29 [30875] [14] INFO: client address was <10.10.10.119>, accepted 2006-01-25
20:09:29 [30875] [14] DEBUG: PAP COMPILER: doing semantic analysis for address
type a IPv4 address 2006-01-25
20:09:29 [30875] [14] DEBUG: using defaults instead of anys 2006-01-25
20:09:29 [30875] [14] DEBUG: PPG: http_read_thread: pap control entity compiled
ok 2006-01-25
20:09:29 [30875] [14] DEBUG: PPG: transform_message: push message content and
headers valid 2006-01-25
20:09:29 [30875] [14] DEBUG: PPG: push machine 0 created 2006-01-25
20:09:29 [30875] [14] DEBUG: PPG: store_push_data: push machine 0 appended to
unit push list 2006-01-25
20:09:29 [30875] [14] DEBUG: PPG: send_push_response: telling pi 2006-01-25
20:09:29 [30875] [14] DEBUG: HTTP: Resetting HTTPClient for `127.0.0.1'. 2006-01-25
20:09:29 [30875] [14] INFO: PPG: handle_push_message: push message accepted for
processing 2006-01-25
20:09:29 [30875] [14] DEBUG: PPG: OTA request for unit push 2006-01-25
20:09:29 [30875] [14] INFO: PPG: unconfirmed push delivered to OTA 2006-01-25
20:09:29 [30875] [14] DEBUG: PPG: destroying push machine 0 2006-01-25
20:09:29 [30875] [9] DEBUG: OTA: event arrived 2006-01-25
20:09:29 [30875] [9] DEBUG: OTA: made connectionless session service request 2006-01-25
20:09:29 [30875] [2] DEBUG: WSP (UNIT): event arrived 2006-01-25
20:09:29 [30875] [2] DEBUG: WSP_UNIT: Connectionless push accepted 2006-01-25
20:09:29 [30875] [2] DEBUG: WSP: Mapping `application/vnd.wap.sic', WSP 1.2 to
0x002e. 2006-01-25
20:09:29 [30875] [2] DEBUG: WSP: Mapping `Content-Length', WSP 1.3 to 0x000d. 2006-01-25
20:09:29 [30875] [2] DEBUG: WSP: Mapping `Content-Type', WSP 1.3 to 0x0011. 2006-01-25
20:09:29 [30875] [2] DEBUG: WSP: Mapping `Encoding-Version', WSP 1.3 to 0x0043. 2006-01-25
20:09:29 [30875] [2] DEBUG: WSP (UNIT): delivering to wdp 2006-01-25
20:09:29 [30875] [10] DEBUG: HTTP: Destroying HTTPClient area 0x857ee68. 2006-01-25
20:09:29 [30875] [10] DEBUG: HTTP: Destroying HTTPClient for `127.0.0.1'. And the bearerbox
console shows, 2006-01-25
20:09:28 [30850] [17] INFO: Client connected from <127.0.0.1> 2006-01-25
20:09:28 [30850] [17] DEBUG: setting up systems for new wapbox 2006-01-25
20:09:28 [30850] [17] DEBUG: Started thread 18 (gw/bb_boxc.c:boxc_sender) 2006-01-25
20:09:28 [30850] [18] DEBUG: Thread 18 (gw/bb_boxc.c:boxc_sender) maps to pid
30850. 2006-01-25
20:09:29 [30850] [17] DEBUG: boxc_receiver: got wdp from wapbox 2006-01-25
20:09:29 [30850] [9] DEBUG: udp: sending message It seems that the
Kannel is trying to send the message and is in infinite loop???? Am I missing
anything again here???? Any help in this
regard is appreciated J Thanks Ajay From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf
Of Ajay Kanukuntla Hello I could configure and work with the Kannel SMS
gateway successfully. Now, I am trying to setup the PPG server for doing WAP
Push. I have some problem when trying to push a test message. It’s
failing with message “ERROR: push
failed, service not found” at console of test_ppg program. The trace on wapbox console shows, 2006-01-25
14:46:33 [28403] [0] INFO: Connected to bearerbox at localhost port 13002. 2006-01-25
14:46:33 [28403] [0] DEBUG: Started thread 15 (gw/heartbeat.c:heartbeat_thread) 2006-01-25
14:46:33 [28403] [15] DEBUG: Thread 15 (gw/heartbeat.c:heartbeat_thread) maps
to pid 28403. 2006-01-25
14:46:41 [28403] [11] DEBUG: HTTP: Creating HTTPClient for `127.0.0.1'. 2006-01-25
14:46:41 [28403] [14] ERROR: Request </> from <127.0.0.1>: service
not found 2006-01-25
14:46:41 [28403] [14] DEBUG: your configuration uses /wappush 2006-01-25
14:46:41 [28403] [14] DEBUG: HTTP: Resetting HTTPClient for `127.0.0.1'. 2006-01-25
14:46:41 [28403] [10] DEBUG: HTTP: Destroying HTTPClient area 0x94b1bf8. 2006-01-25
14:46:41 [28403] [10] DEBUG: HTTP: Destroying HTTPClient for `127.0.0.1'. I was following the document from the IBM
site, http://www-128.ibm.com/developerworks/wireless/library/wi-proxy.html I am using the test_ppg program to push a message, ./test_ppg -q
http://localhost:8080 si.xml my_uncnfpap.xml The kannel bearerbox and wapbox run on the same
machine. I have a Nokia 7210 running on other IP address, 10.10.10.119 which is
configured. The content xml si.xml and control file my_uncnfpap.xml are shown
below. Si.xml <?xml
version="1.0"?> <!DOCTYPE si PUBLIC
"-//WAPFORUM//DTD SI 1.0//EN"
"http://www.wapforum.org/DTD/si.dtd"> <si> <indication href="">
si-id=" action="">
created="2006-01-18T01:33:09Z"
si-expires="2006-05-31T00:00:00Z">
Want to test a fetch? </indication> </si> Control file:
my_uncnfpap.xml <?xml
version="1.0"?> <!DOCTYPE pap PUBLIC
"-//WAPFORUM//DTD PAP//EN"
"http://www.wapforum.org/DTD/pap_1.0.dtd"> <pap> <push-message
push-id="[EMAIL PROTECTED]"
deliver-before-timestamp="2006-09-28T06:45:00Z"
deliver-after-timestamp="2006-01-18T06:45:00Z"
progress-notes-requested="false"> <address
address-value="WAPPUSH=http://10.10.10.119/[EMAIL PROTECTED]"/> <quality-of-service
priority="low"
delivery-method="unconfirmed"
network-required="true"
network="GSM"
bearer-required="true"
bearer="CSD"/> </push-message> </pap> Thanks Ajay |
- RE: URGENT HELP: PPG configuration for WAP Push Ajay Kanukuntla
