Seems your modem does not know about AT-CSMS command.
verify it connecting directly to your modem. Alvaro On 5/24/07, sangprabv <[EMAIL PROTECTED]> wrote:
Hi, I just tried to setup itegno 3000 with 1.4.1 with these config: group = smsc smsc = at host = localhost port = 8993 smsc-id = itegno modemtype = auto device = /dev/ttyUSB0 speed = 115200 group = modems id = WAVECOM name = wavecom detect-string = WAVECOM init-string = "AT+CNMI=1,2,0,1,0;+CMEE=1" When I try to exec the bearbox I got these error: ... 2007-05-26 00:25:25 [2994] [6] DEBUG: AT2[itegno]: device opened 2007-05-26 00:25:26 [2994] [6] DEBUG: AT2[itegno]: device opened 2007-05-26 00:25:26 [2994] [6] INFO: AT2[itegno]: speed set to 115200 2007-05-26 00:25:26 [2994] [6] DEBUG: AT2[itegno]: --> ^M 2007-05-26 00:25:28 [2994] [6] DEBUG: AT2[itegno]: --> AT^M 2007-05-26 00:25:28 [2994] [6] DEBUG: AT2[itegno]: <-- OK 2007-05-26 00:25:28 [2994] [6] DEBUG: AT2[itegno]: --> AT&F^M 2007-05-26 00:25:28 [2994] [6] DEBUG: AT2[itegno]: <-- OK 2007-05-26 00:25:28 [2994] [6] DEBUG: AT2[itegno]: --> ATE0^M 2007-05-26 00:25:29 [2994] [6] DEBUG: AT2[itegno]: <-- OK 2007-05-26 00:25:29 [2994] [6] DEBUG: AT2[itegno]: --> ATI^M 2007-05-26 00:25:29 [2994] [6] DEBUG: AT2[itegno]: <-- WAVECOM MODEM 2007-05-26 00:25:29 [2994] [6] DEBUG: AT2[itegno]: <-- MULTIBAND 900E 1800 2007-05-26 00:25:29 [2994] [6] DEBUG: AT2[itegno]: <-- OK 2007-05-26 00:25:29 [2994] [6] DEBUG: AT2[itegno]: found string <WAVECOM>, using modem definition <wavecom> 2007-05-26 00:25:29 [2994] [6] DEBUG: AT2[itegno]: --> AT+CSMS=?^M 2007-05-26 00:25:30 [2994] [6] DEBUG: AT2[itegno]: <-- ERROR 2007-05-26 00:25:30 [2994] [6] ERROR: AT2[itegno]: Generic error: ERROR 2007-05-26 00:25:30 [2994] [6] INFO: AT2[itegno]: closing device 2007-05-26 00:25:30 [2994] [6] INFO: AT2[itegno]: opening device 2007-05-26 00:25:30 [2994] [6] DEBUG: AT2[itegno]: device opened 2007-05-26 00:25:30 [2994] [6] DEBUG: AT2[itegno]: device opened 2007-05-26 00:25:30 [2994] [6] INFO: AT2[itegno]: init device 2007-05-26 00:25:30 [2994] [6] INFO: AT2[itegno]: speed set to 115200 ... Anybody has the same experience with me? Please share the solution, thanks a lot for the reply. Regards Willy
