Hi,
Thanks for the reply. I found the problem, we must put back the blue thing
(maybe a locker) it works as the antenna for Itegno 3000.
Regards
Willy
----- Original Message -----
From: "Alvaro Cornejo" <[EMAIL PROTECTED]>
To: "sangprabv" <[EMAIL PROTECTED]>
Cc: <[email protected]>
Sent: Wednesday, May 30, 2007 11:20 PM
Subject: Re: itegno 3000 with 1.4.1
Seems your modem does not know about AT-CSMS command.
verify it connecting directly to your modem.
Alvaro
On 5/24/07, sangprabv <[EMAIL PROTECTED]> wrote:
Hi,
I just tried to setup itegno 3000 with 1.4.1 with these config:
group = smsc
smsc = at
host = localhost
port = 8993
smsc-id = itegno
modemtype = auto
device = /dev/ttyUSB0
speed = 115200
group = modems
id = WAVECOM
name = wavecom
detect-string = WAVECOM
init-string = "AT+CNMI=1,2,0,1,0;+CMEE=1"
When I try to exec the bearbox I got these error:
...
2007-05-26 00:25:25 [2994] [6] DEBUG: AT2[itegno]: device opened
2007-05-26 00:25:26 [2994] [6] DEBUG: AT2[itegno]: device opened
2007-05-26 00:25:26 [2994] [6] INFO: AT2[itegno]: speed set to 115200
2007-05-26 00:25:26 [2994] [6] DEBUG: AT2[itegno]: --> ^M
2007-05-26 00:25:28 [2994] [6] DEBUG: AT2[itegno]: --> AT^M
2007-05-26 00:25:28 [2994] [6] DEBUG: AT2[itegno]: <-- OK
2007-05-26 00:25:28 [2994] [6] DEBUG: AT2[itegno]: --> AT&F^M
2007-05-26 00:25:28 [2994] [6] DEBUG: AT2[itegno]: <-- OK
2007-05-26 00:25:28 [2994] [6] DEBUG: AT2[itegno]: --> ATE0^M
2007-05-26 00:25:29 [2994] [6] DEBUG: AT2[itegno]: <-- OK
2007-05-26 00:25:29 [2994] [6] DEBUG: AT2[itegno]: --> ATI^M
2007-05-26 00:25:29 [2994] [6] DEBUG: AT2[itegno]: <-- WAVECOM MODEM
2007-05-26 00:25:29 [2994] [6] DEBUG: AT2[itegno]: <-- MULTIBAND 900E
1800
2007-05-26 00:25:29 [2994] [6] DEBUG: AT2[itegno]: <-- OK
2007-05-26 00:25:29 [2994] [6] DEBUG: AT2[itegno]: found string
<WAVECOM>,
using modem definition <wavecom>
2007-05-26 00:25:29 [2994] [6] DEBUG: AT2[itegno]: --> AT+CSMS=?^M
2007-05-26 00:25:30 [2994] [6] DEBUG: AT2[itegno]: <-- ERROR
2007-05-26 00:25:30 [2994] [6] ERROR: AT2[itegno]: Generic error: ERROR
2007-05-26 00:25:30 [2994] [6] INFO: AT2[itegno]: closing device
2007-05-26 00:25:30 [2994] [6] INFO: AT2[itegno]: opening device
2007-05-26 00:25:30 [2994] [6] DEBUG: AT2[itegno]: device opened
2007-05-26 00:25:30 [2994] [6] DEBUG: AT2[itegno]: device opened
2007-05-26 00:25:30 [2994] [6] INFO: AT2[itegno]: init device
2007-05-26 00:25:30 [2994] [6] INFO: AT2[itegno]: speed set to 115200
...
Anybody has the same experience with me? Please share the solution,
thanks a
lot for the reply.
Regards
Willy
