Hi Guys,
Thanks for the responses.
1. ~#dmesg | tty returns nothing. Further when i do ~#dmesg : it doesn't
show which device it was attached to.
2. when i used ~#hwinfo modems : the 6230 is listed as one of the modems and
it shows that it is attached to /dev/ttyACM0. However, the device file
doesn't exist.
3. So i created the device file using ~#mknod /dev/ttyACM0 c 166 0 and
changed my device setting to this newly created device.
4. however, when i started bearerbox and smsbox, it panics and says
AT2[/dev/ttyACM0]: file not found. ERRNO=6
what could i be missing?
On 6/11/07, sangprabv <[EMAIL PROTECTED]> wrote:
Hi,
If your SuSE can not read the device then you need to do this:
#mknod /dev/ttyUSBn c 188 n, substitute n with the port number eq.: #mknod
/dev/ttyUSB0 c 188 0
But if the problem is your kannel configuration then you only need to read
again the documentation.
Regards
Willy
----- Original Message -----
From: "Richard Asiimwe" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Monday, June 11, 2007 6:15 PM
Subject: Nokia 6230 as virtual smsc
> Hi,
> I'd like to configure a nokia 6230 as a virtual smsc. I'm using SuSE
> 10.0 and connecting using a USB DKU-2/3 cable. Everything seems to be
> ok except that whilst lsusb shows that a nokia 6230 is connected to
> say bus 2 device 2, i cannot figure out what device name suse 10 has
> assigned to the device.
> when i looked for /dev/ttyUSB* or /dev/ttyACM* no such device or file
> was found and indeed using any of them in the smsc configuration's
> device directive throws kannel into a panic.
> Does any one know how i can identify the correct device to use?
> Thanks,
> Richard.
> --
> Richard Asiimwe.
> Future Link Technologies
> Mob: +256 78 2 486 198
> +256 75 2 486 198
> Office: +256 41 531 274
> url: http://www.fl-t.com
> Life is not a rehearsal...
>
--
Richard Asiimwe.
Future Link Technologies
Mob: +256 78 2 486 198
+256 75 2 486 198
Office: +256 41 531 274
url: http://www.fl-t.com
Life is not a rehearsal...
