Sorry, I responded too hastily - I have setup the phone to correctly connect to Kannel without requiring user prompting. However, looking at the logs, I am seeing the error below. Could it be because my configuration settings (the phone settings you mentioned) are incorrect? If so, what is the best way to troubleshoot this issue?
Thanks again, Kenshi 2007-09-01 15:18:18 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: device opened 2007-09-01 15:18:18 [333] [6] INFO: AT2[/dev/tty.ey-SerialPort-1]: init device 2007-09-01 15:18:18 [333] [6] INFO: AT2[/dev/tty.ey-SerialPort-1]: speed set to 115200 2007-09-01 15:18:18 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: --> ATZ^M 2007-09-01 15:18:20 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: <-- OK 2007-09-01 15:18:20 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: --> AT^M 2007-09-01 15:18:20 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: <-- AT 2007-09-01 15:18:20 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: <-- OK 2007-09-01 15:18:20 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: --> AT&F^M 2007-09-01 15:18:20 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: <-- AT&F 2007-09-01 15:18:20 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: <-- OK 2007-09-01 15:18:20 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: --> ATE0^M 2007-09-01 15:18:20 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: <-- ATE0 2007-09-01 15:18:20 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: <-- OK 2007-09-01 15:18:20 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: --> AT+IFC=2,2^M 2007-09-01 15:18:20 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: <-- OK 2007-09-01 15:18:20 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: --> AT+CPIN?^M 2007-09-01 15:18:20 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: <-- +CPIN: READY 2007-09-01 15:18:20 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: <-- OK 2007-09-01 15:18:20 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: --> AT+CMGF=0^M 2007-09-01 15:18:21 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: <-- OK 2007-09-01 15:18:21 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: --> AT+CSMS=?^M 2007-09-01 15:18:21 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: <-- +CSMS: (0) 2007-09-01 15:18:21 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: <-- OK 2007-09-01 15:18:21 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: --> AT+CNMI=1,2,0,1,0^M 2007-09-01 15:18:21 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: <-- +CMS ERROR: 303 2007-09-01 15:18:21 [333] [6] ERROR: AT2[/dev/tty.ey-SerialPort-1]: CMS ERROR: +CMS ERROR: 303 2007-09-01 15:18:21 [333] [6] ERROR: AT2[/dev/tty.ey-SerialPort-1]: CMS ERROR: Operation not supported (303) 2007-09-01 15:18:21 [333] [6] ERROR: AT2[/dev/tty.ey-SerialPort-1]: Opening failed. Terminating 2007-09-01 15:18:21 [333] [6] INFO: AT2[/dev/tty.ey-SerialPort-1]: closing device On 9/1/07, Kenshi Arasaki <[EMAIL PROTECTED]> wrote: > > Hi Alejandro, > > Thanks for the information. I've paired my phone, tested it with zTerm and > have started kannel up to connect to it. However, it keeps pinging my phone > (my phone regularly prompts "Accept DUN connection with [computer-name]?". > If I don't accept in time, kannel (and mac os x) will fail with a bluetooth > serial error. I'm wondering if this is a configuration issue, or something I > will have to accept using BT? > > Cheers, > Kenshi > > On 9/1/07, Alejandro Guerrieri <[EMAIL PROTECTED]> wrote: > > > > On MAC OS X, open a Terminal and type: > > > > ls /dev/tty* > > > > you'll see all the TTY devices recognized. Your BT modem should be > > listed there (you'll have to pair it from Mac OS X first) > > > > Start trying to connect by using a terminal program (minicom and zTerm > > are available for Mac OS X). Only after you're able to connect by this > > "simple" means try connecting from Kannel. > > > > You should be able to send regular "AT" commands to the phone. > > > > You may have to tweak modems.conf to accomodate your particular > > phone's subtleties, in particular init strings. For example, AT+CNMI > > tends to vary a lot from phone to phone. > > > > Hope it helps, > > > > Alejandro Guerrieri > > > > On 9/1/07, Kenshi Arasaki <[EMAIL PROTECTED]> wrote: > > > Hi guys, > > > > > > I've been playing around with kannel with a samsung-e890 phone over > > the > > > bluetooth "serial port" (I know, it's a weird setup, but I'm just > > playing > > > around with it). Has anyone tried to setup kannel with a similar > > > configuration? Also, I'm not sure what the smsc or modem settings > > should be > > > with a samsung gsm modem - does anyone have any tips on where I could > > find > > > this information? > > > > > > Thanks, > > > Kenshi > > > > > > > > > -- > > Alejandro Guerrieri > > Magicom > > http://www.magicom-bcn.net/ > > LinkedIn: http://www.linkedin.com/in/aguerrieri > > > > >
