Awesome - that worked! Thank you very much!
Cheers, Kenshi On 9/1/07, preeteesh kakkar <[EMAIL PROTECTED]> wrote: > > Try setting AT+CNMI=1,1 in you confg file..! > > On 9/1/07, Kenshi Arasaki <[EMAIL PROTECTED]> wrote: > > > > Sorry, I responded too hastily - I have setup the phone to correctly > > connect to Kannel without requiring user prompting. However, looking at the > > logs, I am seeing the > > error below. Could it be because my configuration settings (the phone > > settings you mentioned) are incorrect? If so, what is the best way to > > troubleshoot this issue? > > > > Thanks again, > > Kenshi > > > > 2007-09-01 15:18:18 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: > > device opened > > 2007-09-01 15:18:18 [333] [6] INFO: AT2[/dev/tty.ey-SerialPort-1]: init > > device > > 2007-09-01 15:18:18 [333] [6] INFO: AT2[/dev/tty.ey-SerialPort-1]: speed > > set to 115200 > > 2007-09-01 15:18:18 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: --> > > ATZ^M > > 2007-09-01 15:18:20 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: <-- > > OK > > 2007-09-01 15:18:20 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: --> > > AT^M > > 2007-09-01 15:18:20 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: <-- > > AT > > 2007-09-01 15:18:20 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: <-- > > OK > > 2007-09-01 15:18:20 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: --> > > AT&F^M > > 2007-09-01 15:18:20 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: <-- > > AT&F > > 2007-09-01 15:18:20 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: <-- > > OK > > 2007-09-01 15:18:20 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: --> > > ATE0^M > > 2007-09-01 15:18:20 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: <-- > > ATE0 > > 2007-09-01 15:18:20 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: <-- > > OK > > 2007-09-01 15:18:20 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: --> > > AT+IFC=2,2^M > > 2007-09-01 15:18:20 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: <-- > > OK > > 2007-09-01 15:18:20 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: --> > > AT+CPIN?^M > > 2007-09-01 15:18:20 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: <-- > > +CPIN: READY > > 2007-09-01 15:18:20 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: <-- > > OK > > 2007-09-01 15:18:20 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: --> > > AT+CMGF=0^M > > 2007-09-01 15:18:21 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: <-- > > OK > > 2007-09-01 15:18:21 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: --> > > AT+CSMS=?^M > > 2007-09-01 15:18:21 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: <-- > > +CSMS: (0) > > 2007-09-01 15:18:21 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: <-- > > OK > > 2007-09-01 15:18:21 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: --> > > AT+CNMI=1,2,0,1,0^M > > 2007-09-01 15:18:21 [333] [6] DEBUG: AT2[/dev/tty.ey-SerialPort-1]: <-- > > +CMS ERROR: 303 > > 2007-09-01 15:18:21 [333] [6] ERROR: AT2[/dev/tty.ey-SerialPort-1]: CMS > > ERROR: +CMS ERROR: 303 > > 2007-09-01 15:18:21 [333] [6] ERROR: AT2[/dev/tty.ey-SerialPort-1]: CMS > > ERROR: Operation not supported (303) > > 2007-09-01 15:18:21 [333] [6] ERROR: AT2[/dev/tty.ey-SerialPort-1]: > > Opening failed. Terminating > > 2007-09-01 15:18:21 [333] [6] INFO: AT2[/dev/tty.ey-SerialPort-1]: > > closing device > > > > > > > > On 9/1/07, Kenshi Arasaki <[EMAIL PROTECTED] > wrote: > > > > > > Hi Alejandro, > > > > > > Thanks for the information. I've paired my phone, tested it with zTerm > > > and have started kannel up to connect to it. However, it keeps pinging my > > > phone (my phone regularly prompts "Accept DUN connection with > > > [computer-name]?". If I don't accept in time, kannel (and mac os x) will > > > fail with a bluetooth serial error. I'm wondering if this is a > > > configuration > > > issue, or something I will have to accept using BT? > > > > > > Cheers, > > > Kenshi > > > > > > On 9/1/07, Alejandro Guerrieri < [EMAIL PROTECTED] > > > > wrote: > > > > > > > > On MAC OS X, open a Terminal and type: > > > > > > > > ls /dev/tty* > > > > > > > > you'll see all the TTY devices recognized. Your BT modem should be > > > > listed there (you'll have to pair it from Mac OS X first) > > > > > > > > Start trying to connect by using a terminal program (minicom and > > > > zTerm > > > > are available for Mac OS X). Only after you're able to connect by > > > > this > > > > "simple" means try connecting from Kannel. > > > > > > > > You should be able to send regular "AT" commands to the phone. > > > > > > > > You may have to tweak modems.conf to accomodate your particular > > > > phone's subtleties, in particular init strings. For example, AT+CNMI > > > > > > > > tends to vary a lot from phone to phone. > > > > > > > > Hope it helps, > > > > > > > > Alejandro Guerrieri > > > > > > > > On 9/1/07, Kenshi Arasaki < [EMAIL PROTECTED]> wrote: > > > > > Hi guys, > > > > > > > > > > I've been playing around with kannel with a samsung-e890 phone > > > > over the > > > > > bluetooth "serial port" (I know, it's a weird setup, but I'm just > > > > playing > > > > > around with it). Has anyone tried to setup kannel with a similar > > > > > configuration? Also, I'm not sure what the smsc or modem settings > > > > should be > > > > > with a samsung gsm modem - does anyone have any tips on where I > > > > could find > > > > > this information? > > > > > > > > > > Thanks, > > > > > Kenshi > > > > > > > > > > > > > > > > > -- > > > > Alejandro Guerrieri > > > > Magicom > > > > http://www.magicom-bcn.net/ > > > > LinkedIn: http://www.linkedin.com/in/aguerrieri > > > > > > > > > > > > > >
