Hi,
Iam using wavecom fastrack M1306B modem. its working without any issue. (serial
modem)
--Tharanga Abeyseela--
----- Original Message -----
From: Joyce Gutierrez
To: Tharanga
Cc: Kannel
Sent: Tuesday, September 30, 2008 7:41 AM
Subject: Re: Generic Error while Sending Message with Kannel
Hi again,
Thank you for pointing out things I need to look out for,
I think my problem is the questionable stability of my modem. I tried to use
another usb to serial cable which I use to configure another equipment; however
I still get the same result, the modem can be detected but it cannot send
messages successfully. Now when I try to send messages with kannel, sometimes
in the smsc.log, I see that there are no Generic error when sending some
messages and for some other messages the generic error thing still occurs. In
the end messages are not sent successfully to the mobile phones intended to be
the recipient.
Do you think my suspicion is right? and what modems/phones could anyone
recommend for me to use with kannel?
Much thanks,
Joyce
----- Original Message ----
From: Tharanga <[EMAIL PROTECTED]>
To: Joyce Gutierrez <[EMAIL PROTECTED]>
Sent: Monday, September 29, 2008 6:12:21 PM
Subject: Re: Generic Error while Sending Message with Kannel
may be ur convertion. usb to serial.
----- Original Message -----
From: Joyce Gutierrez
To: Tharanga
Cc: Kannel
Sent: Monday, September 29, 2008 3:28 PM
Subject: Re: Generic Error while Sending Message with Kannel
Hi Tharanga,
Actually I have tried minicom, because I am connecting my modem through a
serial to USB port. When I type AT it says ok, but when I try other AT commands
that I see kannel is using to send a particular message it always says error.
For example:
AT+CMGS=24^M
> hello
ERROR
I also tried to use wvdial, and it can detect my modem on the usb port I
connected my modem to. My OS can also detect it for when I look for the log in
/var/log/messages I can see the following:
Sep 17 15:03:52 host kernel: pl2303 2-2:1.0: pl2303 converter detected
Sep 17 15:03:52 host kernel: usb 2-2: pl2303 converter now attached to
ttyUSB0
Sep 17 15:03:52 host kernel: usbcore: registered new driver pl2303
Sep 17 15:03:52 host kernel: drivers/usb/serial/pl2303.c: Prolific PL2303
USB to serial adaptor driver
Does this mean my problem is really my gsm modem?
So much thanks,
Joyce
----- Original Message ----
From: Tharanga <[EMAIL PROTECTED]>
To: Tharanga <[EMAIL PROTECTED]>; Joyce Gutierrez <[EMAIL PROTECTED]>
Cc: Kannel users <[email protected]>
Sent: Monday, September 29, 2008 3:55:45 PM
Subject: Re: Generic Error while Sending Message with Kannel
sorry...it will not work for minicom. u have a USB.. can OS recognized your
driver ?
----- Original Message -----
From: Tharanga
To: Joyce Gutierrez
Cc: Kannel users
Sent: Monday, September 29, 2008 1:21 PM
Subject: Re: Generic Error while Sending Message with Kannel
May be the problem with your USB modem. try to connect it from minicom
and see. (it should accept AT commands). otherthan that i cant see any problem
in your config .
--Tharanga Abeyseela--
----- Original Message -----
From: Joyce Gutierrez
To: Tharanga
Cc: Kannel users
Sent: Monday, September 29, 2008 12:35 PM
Subject: Re: Generic Error while Sending Message with Kannel
Hi,
thanks for replying, here is my current kannel.conf
group = core
admin-port = 15000
smsbox-port = 15001
admin-password = password
status-password = foo
#admin-deny-ip = ""
#admin-allow-ip = ""
#http-proxy-host =
#http-proxy-username =
#http-proxy-password =
log-file = "/var/log/kannel/kannel.log"
log-level = 0
box-deny-ip = "*.*.*.*"
box-allow-ip = "127.0.0.1"
#unified-prefix = "+358,00358,0;+,00"
access-log = "/var/log/kannel/access.log"
#store-file = "kannel.store"
#ssl-server-cert-file = "cert.pem"
#ssl-server-key-file = "key.pem"
#ssl-certkey-file = "mycertandprivkeyfile.pem"
group = smsc
smsc = at
modemtype = auto
device = /dev/ttyUSB0
my-number = +639089568898
#smsc-center = +639180000130
smsc-id = SDI
#port = 13001
#port = 10000
connect-allow-ip = 127.0.0.1
log-level = 0
log-file = /var/log/kannel/smsc.log
#speed = 115200
group = smsbox
bearerbox-host = 127.0.0.1
sendsms-port = 15013
global-sender = +639089568898
sendsms-chars = "0123456789 +-"
log-file = "/var/log/kannel/smsbox.log"
log-level = 0
access-log = "/var/log/kannel/smsboxaccess.log"
group = sendsms-user
username = tester
password = foobar
#user-deny-ip = ""
#user-allow-ip = ""
concatenation =true
max-messages = 4
group = sms-service
keyword = nop
text = "You asked nothing and I did it!"
group = sms-service
keyword = default
text = "No service specified"
group = sms-service
keyword =
keyword-regex = .*
catch-all = yes
max-messages = 0
get-url = "http://localhost/sms.php?phone=%p&text=%a";
include = "/usr/local/kannel/modems.conf"
I hope somebody could somehow point out what problem I have to
experience this sudden issue with my Kannel. I hope it's not hardware related
as I have read on some other posts. But if it is might as well face it and
replace my current gsm modem.
Thank in advance,
Joyce
----- Original Message ----
From: Tharanga <[EMAIL PROTECTED]>
To: Joyce Gutierrez <[EMAIL PROTECTED]>; Kannel users <[email protected]>
Sent: Monday, September 29, 2008 2:07:06 PM
Subject: Re: Generic Error while Sending Message with Kannel
Can u share your kannel.conf with us.
--Tharanga Abeyseela--
----- Original Message -----
From: Joyce Gutierrez
To: Kannel users
Sent: Monday, September 29, 2008 9:43 AM
Subject: Generic Error while Sending Message with Kannel
Hi guys,
I suddenly had a problem with my kannel installation. I have
successfully configured it in the past enabling my gsm modem to send and
receive messages to and from a mobile phone. However, now, whenever I try to
send messages with kannel, I always get a generic error as follows:
2008-09-29 11:32:41 [17132] [6] INFO: AT2[TSG]: AT SMSC successfully
opened.
2008-09-29 11:33:09 [17132] [6] DEBUG: AT2[TSG]: TP-Validity-Period:
24.0 hours
2008-09-29 11:33:09 [17132] [6] DEBUG: AT2[TSG]: --> AT+CMGS=24^M
2008-09-29 11:33:09 [17132] [6] DEBUG: AT2[TSG]: <--
2008-09-29 11:33:09 [17132] [6] DEBUG: AT2[TSG]: <-- >
2008-09-29 11:33:09 [17132] [6] DEBUG: AT2[TSG]: send command status:
1
2008-09-29 11:33:09 [17132] [6] DEBUG: AT2[TSG]: -->
0011000B819080893786F40000A70BC8329BFD06DDDF723619
2008-09-29 11:33:09 [17132] [6] DEBUG: AT2[TSG]: --> ^Z
2008-09-29 11:33:19 [17132] [6] DEBUG: AT2[TSG]: <-- ERROR
2008-09-29 11:33:19 [17132] [6] ERROR: AT2[TSG]: Generic error: ERROR
2008-09-29 11:33:19 [17132] [6] DEBUG: AT2[TSG]: send command status:
-1
2008-09-29 11:33:19 [17132] [6] DEBUG: AT2[TSG]: --> AT+CMGS=24^M
2008-09-29 11:33:19 [17132] [6] DEBUG: AT2[TSG]: <-- >
2008-09-29 11:33:19 [17132] [6] DEBUG: AT2[TSG]: send command status:
1
2008-09-29 11:33:19 [17132] [6] DEBUG: AT2[TSG]: -->
0011000B819080893786F40000A70BC8329BFD06DDDF723619
I have tried to reset the modem I am using several times and also
reinstall my kannel;but, unfortunately I still get the same error. I read in
some posts that this problem could be caused by an unstable modem or SMSC.
Could there be any work around on this? I just really need to revive my Kannel
installation.
Thanks in advance,
