Hi Muralidhar, Have you been using this w910i in high production, kindly share your experience.
Is it very stable? What is the throughput ? . On 11/17/08, Muralidhar BN <[EMAIL PROTECTED]> wrote: > Please refer the sonyericsson_w910i config file I am using. Hope it helps. > > > > _____ > > From: Preetam Palwe [mailto:[EMAIL PROTECTED] > Sent: Friday, November 14, 2008 7:17 PM > To: [email protected] > Subject: sony ericsson z530i is not getting detected ? > > > > Hello all > > I am using USB sony ericsson z530i cellphone on my FC6 > machine as modem. When I start kannel with following configuration the > bearerbox goes into while loop. > > In logs I found these errors . > > > > What might be going wrong? > > > > When I tried with > # wvdialconf newconffile > > My modem was there on /ttyS10. (Which I verified with minicom as well) > > > > Here is the output of # wvdialconf newconffile > > > ............................................................................ > ...................................... > > > [EMAIL PROTECTED] ~]# wvdialconf newconffile > Scanning your serial ports for a modem. > > ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud > ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud > ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. > Port Scan<*1>: S1 S2 S3 > WvModem<*1>: Cannot get information for serial port. > ttyS10<*1>: ATQ0 V1 E1 -- OK > ttyS10<*1>: ATQ0 V1 E1 Z -- OK > ttyS10<*1>: ATQ0 V1 E1 S0=0 -- OK > ttyS10<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK > ttyS10<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK > ttyS10<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK > ttyS10<*1>: Modem Identifier: ATI -- Sony Ericsson Z530 > ttyS10<*1>: Speed 4800: AT -- OK > ttyS10<*1>: Speed 9600: AT -- OK > ttyS10<*1>: Speed 19200: AT -- OK > ttyS10<*1>: Speed 38400: AT -- OK > ttyS10<*1>: Speed 57600: AT -- OK > ttyS10<*1>: Speed 115200: AT -- OK > ttyS10<*1>: Speed 230400: AT -- OK > ttyS10<*1>: Speed 460800: AT -- OK > ttyS10<*1>: Max speed is 460800; that should be safe. > ttyS10<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK > WvModem<*1>: Cannot get information for serial port. > ttyACM0<*1>: ATQ0 V1 E1 -- OK > ttyACM0<*1>: ATQ0 V1 E1 Z -- OK > ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK > ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK > ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK > ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK > ttyACM0<*1>: Modem Identifier: ATI -- Sony Ericsson Z530 > ttyACM0<*1>: Speed 4800: AT -- OK > ttyACM0<*1>: Speed 9600: AT -- OK > ttyACM0<*1>: Speed 19200: AT -- OK > ttyACM0<*1>: Speed 38400: AT -- OK > ttyACM0<*1>: Speed 57600: AT -- OK > ttyACM0<*1>: Speed 115200: AT -- OK > ttyACM0<*1>: Speed 230400: AT -- OK > ttyACM0<*1>: Speed 460800: AT -- OK > ttyACM0<*1>: Max speed is 460800; that should be safe. > ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK > WvModem<*1>: Cannot get information for serial port. > ttyACM1<*1>: ATQ0 V1 E1 -- OK > ttyACM1<*1>: ATQ0 V1 E1 Z -- OK > ttyACM1<*1>: ATQ0 V1 E1 S0=0 -- OK > ttyACM1<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK > ttyACM1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK > ttyACM1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK > ttyACM1<*1>: Modem Identifier: ATI -- Sony Ericsson Z530 > ttyACM1<*1>: Speed 4800: AT -- OK > ttyACM1<*1>: Speed 9600: AT -- OK > ttyACM1<*1>: Speed 19200: AT -- OK > ttyACM1<*1>: Speed 38400: AT -- OK > ttyACM1<*1>: Speed 57600: AT -- OK > ttyACM1<*1>: Speed 115200: AT -- OK > ttyACM1<*1>: Speed 230400: AT -- OK > ttyACM1<*1>: Speed 460800: AT -- OK > ttyACM1<*1>: Max speed is 460800; that should be safe. > ttyACM1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK > > Found a modem on /dev/ttyS10. > Modem configuration written to newconffile. > ttyS10<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" > ttyACM0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" > ttyACM1<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" > [EMAIL PROTECTED] ~]# > > [EMAIL PROTECTED] ~]# cat newconffile > > [Dialer Defaults] > Modem = /dev/ttyS10 > Baud = 460800 > Init1 = ATZ > Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > ISDN = 0 > Modem Type = Analog Modem > ; Phone = <Target Phone Number> > ; Username = <Your Login Name> > ; Password = <Your Password> > [EMAIL PROTECTED] ~]# > > > > ............................................................................ > ...................................... > > > > The kannel logs ... > > > > > > > > 2008-11-14 19:04:56 [4736] [0] INFO: AT2[/dev/ttyS10]: configuration doesn't > show modemtype. will autodetect > > 2008-11-14 19:04:56 [4736] [0] DEBUG: Started thread 6 > (gw/smsc/smsc_at.c:at2_device_thread) > > 2008-11-14 19:04:56 [4736] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller) maps > to pid 4736. > > 2008-11-14 19:04:56 [4736] [2] DEBUG: Thread 2 (gwlib/http.c:server_thread) > maps to pid 4736. > > 2008-11-14 19:04:56 [4736] [3] DEBUG: Thread 3 (gw/bb_http.c:httpadmin_run) > maps to pid 4736. > > 2008-11-14 19:04:56 [4736] [4] DEBUG: Thread 4 > (gw/bb_boxc.c:sms_to_smsboxes) maps to pid 4736. > > 2008-11-14 19:04:56 [4736] [5] DEBUG: Thread 5 (gw/bb_boxc.c:smsboxc_run) > maps to pid 4736. > > 2008-11-14 19:04:56 [4736] [0] DEBUG: Started thread 7 > (gw/bb_smscconn.c:sms_router) > > 2008-11-14 19:04:56 [4736] [0] INFO: > ---------------------------------------- > > 2008-11-14 19:04:56 [4736] [0] INFO: Kannel bearerbox II version 1.4.1 > starting > > 2008-11-14 19:04:56 [4736] [0] ERROR: fopen failed: couldn't open > `/tmp/kannel/kannel.store' > > 2008-11-14 19:04:56 [4736] [0] ERROR: System error 2: No such file or > directory > > 2008-11-14 19:04:56 [4736] [0] ERROR: fopen failed: couldn't open > `/tmp/kannel/kannel.store.new' > > 2008-11-14 19:04:56 [4736] [0] ERROR: System error 2: No such file or > directory > > 2008-11-14 19:04:56 [4736] [0] ERROR: fopen failed: couldn't open > `/tmp/kannel/kannel.store.bak' > > 2008-11-14 19:04:56 [4736] [0] ERROR: System error 2: No such file or > directory > > 2008-11-14 19:04:56 [4736] [0] INFO: Cannot open any store file, starting a > new one > > 2008-11-14 19:04:56 [4736] [0] DEBUG: Started thread 8 > (gw/bb_store.c:store_dumper) > > 2008-11-14 19:04:56 [4736] [0] INFO: MAIN: Start-up done, entering mainloop > > 2008-11-14 19:04:56 [4736] [0] DEBUG: AT2[/dev/ttyS10]: start called > > 2008-11-14 19:04:56 [4736] [6] DEBUG: Thread 6 > (gw/smsc/smsc_at.c:at2_device_thread) maps to pid 4736. > > 2008-11-14 19:04:56 [4736] [6] DEBUG: AT2[/dev/ttyS10]: detecting modem > speed. > > 2008-11-14 19:04:56 [4736] [6] INFO: AT2[/dev/ttyS10]: opening device > > 2008-11-14 19:04:56 [4736] [7] DEBUG: Thread 7 (gw/bb_smscconn.c:sms_router) > maps to pid 4736. > > 2008-11-14 19:04:56 [4736] [7] DEBUG: sms_router: time to sleep 30.00 secs. > > 2008-11-14 19:04:56 [4736] [7] DEBUG: sms_router: gwlist_len = 0 > > 2008-11-14 19:04:56 [4736] [8] DEBUG: Thread 8 (gw/bb_store.c:store_dumper) > maps to pid 4736. > > 2008-11-14 19:04:56 [4736] [8] DEBUG: Dumping 0 messages to store > > 2008-11-14 19:04:56 [4736] [6] DEBUG: AT2[/dev/ttyS10]: device opened > > 2008-11-14 19:04:57 [4736] [6] DEBUG: AT2[/dev/ttyS10]: device opened > > 2008-11-14 19:04:57 [4736] [6] INFO: AT2[/dev/ttyS10]: speed set to 115200 > > 2008-11-14 19:04:57 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> ^M > > 2008-11-14 19:04:59 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> AT^M > > 2008-11-14 19:04:59 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- OK > > 2008-11-14 19:04:59 [4736] [6] INFO: AT2[/dev/ttyS10]: closing device > > 2008-11-14 19:04:59 [4736] [6] INFO: AT2[/dev/ttyS10]: detect speed is > 115200 > > 2008-11-14 19:04:59 [4736] [6] DEBUG: AT2[/dev/ttyS10]: detecting modem type > > 2008-11-14 19:04:59 [4736] [6] INFO: AT2[/dev/ttyS10]: opening device > > 2008-11-14 19:04:59 [4736] [6] DEBUG: AT2[/dev/ttyS10]: device opened > > 2008-11-14 19:05:00 [4736] [6] DEBUG: AT2[/dev/ttyS10]: device opened > > 2008-11-14 19:05:00 [4736] [6] INFO: AT2[/dev/ttyS10]: speed set to 115200 > > 2008-11-14 19:05:00 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> ^M > > 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> AT^M > > 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- OK > > 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> AT&F^M > > 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- OK > > 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> ATE0^M > > 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- ATE0 > > 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- OK > > 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> ATI^M > > 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- Sony Ericsson > Z530 > > 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- OK > > 2008-11-14 19:05:02 [4736] [6] DEBUG: Loading include file > `/etc/modems.conf' (on line 42 of file /etc/gsm-sms-kannel.conf). > > 2008-11-14 19:05:02 [4736] [6] DEBUG: Loading include file > `/etc/modems.conf' (on line 42 of file /etc/gsm-sms-kannel.conf). > > 2008-11-14 19:05:02 [4736] [6] DEBUG: Loading include file > `/etc/modems.conf' (on line 42 of file /etc/gsm-sms-kannel.conf). > > 2008-11-14 19:05:02 [4736] [6] DEBUG: Loading include file > `/etc/modems.conf' (on line 42 of file /etc/gsm-sms-kannel.conf). > > 2008-11-14 19:05:02 [4736] [6] DEBUG: Loading include file > `/etc/modems.conf' (on line 42 of file /etc/gsm-sms-kannel.conf). > > 2008-11-14 19:05:02 [4736] [6] DEBUG: Loading include file > `/etc/modems.conf' (on line 42 of file /etc/gsm-sms-kannel.conf). > > 2008-11-14 19:05:02 [4736] [6] DEBUG: Loading include file > `/etc/modems.conf' (on line 42 of file /etc/gsm-sms-kannel.conf). > > 2008-11-14 19:05:02 [4736] [6] DEBUG: Loading include file > `/etc/modems.conf' (on line 42 of file /etc/gsm-sms-kannel.conf). > > 2008-11-14 19:05:02 [4736] [6] DEBUG: Loading include file > `/etc/modems.conf' (on line 42 of file /etc/gsm-sms-kannel.conf). > > 2008-11-14 19:05:02 [4736] [6] DEBUG: Loading include file > `/etc/modems.conf' (on line 42 of file /etc/gsm-sms-kannel.conf). > > 2008-11-14 19:05:02 [4736] [6] DEBUG: Loading include file > `/etc/modems.conf' (on line 42 of file /etc/gsm-sms-kannel.conf). > > 2008-11-14 19:05:02 [4736] [6] DEBUG: Loading include file > `/etc/modems.conf' (on line 42 of file /etc/gsm-sms-kannel.conf). > > 2008-11-14 19:05:02 [4736] [6] DEBUG: Loading include file > `/etc/modems.conf' (on line 42 of file /etc/gsm-sms-kannel.conf). > > 2008-11-14 19:05:02 [4736] [6] DEBUG: Loading include file > `/etc/modems.conf' (on line 42 of file /etc/gsm-sms-kannel.conf). > > 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: Cannot detect modem, > using generic > > 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: Reading modem > definitions from </etc/gsm-sms-kannel.conf> > > 2008-11-14 19:05:02 [4736] [6] DEBUG: Loading include file > `/etc/modems.conf' (on line 42 of file /etc/gsm-sms-kannel.conf). > > 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: Found <13> modems in > config > > 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> AT+CSMS=?^M > > 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- +CSMS: (0) > > 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- OK > > 2008-11-14 19:05:02 [4736] [6] INFO: AT2[/dev/ttyS10]: closing device > > 2008-11-14 19:05:02 [4736] [6] INFO: AT2[/dev/ttyS10]: opening device > > 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: device opened > > 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: device opened > > 2008-11-14 19:05:02 [4736] [6] INFO: AT2[/dev/ttyS10]: init device > > 2008-11-14 19:05:02 [4736] [6] INFO: AT2[/dev/ttyS10]: speed set to 115200 > > 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> ATZ^M > > 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- OK > > 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> AT^M > > 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- OK > > 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> AT&F^M > > 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- OK > > 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> ATE0^M > > 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- ATE0 > > 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- OK > > 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> AT+IFC=2,2^M > > 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- OK > > 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> AT+CPIN?^M > > 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- +CPIN: READY > > 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- OK > > 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> AT+CMGF=0^M > > 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- OK > > 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> AT+CSMS=?^M > > 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- +CSMS: (0) > > 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- OK > > 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> > AT+CNMI=1,2,0,1,0^M > > 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- +CMS ERROR: 303 > > 2008-11-14 19:05:03 [4736] [6] ERROR: AT2[/dev/ttyS10]: CMS ERROR: +CMS > ERROR: 303 > > 2008-11-14 19:05:03 [4736] [6] ERROR: AT2[/dev/ttyS10]: CMS ERROR: Operation > not supported (303) > > 2008-11-14 19:05:03 [4736] [6] ERROR: AT2[/dev/ttyS10]: Opening failed. > Terminating > > 2008-11-14 19:05:03 [4736] [6] INFO: AT2[/dev/ttyS10]: closing device > > 2008-11-14 19:05:03 [4736] [6] INFO: AT2[/dev/ttyS10]: opening device > > 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: device opened > > 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: device opened > > 2008-11-14 19:05:03 [4736] [6] INFO: AT2[/dev/ttyS10]: init device > > 2008-11-14 19:05:03 [4736] [6] INFO: AT2[/dev/ttyS10]: speed set to 115200 > > 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> ATZ^M > > 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- OK > > 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> AT^M > > 2008-11-14 19:05:04 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- OK > > 2008-11-14 19:05:04 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> AT&F^M > > > > ............................................................................ > ...................................... > > > > > > > > > > -- Regards, Kenny "Whosoever desires constant success must change his conduct with the times."-Niccolo Machiavelli
