Done!
Thanks a lot Murali! From: Muralidhar BN [mailto:[EMAIL PROTECTED] Sent: Monday, November 17, 2008 9:23 AM To: 'Preetam Palwe' Cc: [email protected] Subject: RE: sony ericsson z530i is not getting detected ? Please refer the sonyericsson_w910i config file I am using. Hope it helps. _____ From: Preetam Palwe [mailto:[EMAIL PROTECTED] Sent: Friday, November 14, 2008 7:17 PM To: [email protected] Subject: sony ericsson z530i is not getting detected ? Hello all I am using USB sony ericsson z530i cellphone on my FC6 machine as modem. When I start kannel with following configuration the bearerbox goes into while loop. In logs I found these errors . What might be going wrong? When I tried with # wvdialconf newconffile My modem was there on /ttyS10. (Which I verified with minicom as well) Here is the output of # wvdialconf newconffile ............................................................................ ...................................... [EMAIL PROTECTED] ~]# wvdialconf newconffile Scanning your serial ports for a modem. ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. Port Scan<*1>: S1 S2 S3 WvModem<*1>: Cannot get information for serial port. ttyS10<*1>: ATQ0 V1 E1 -- OK ttyS10<*1>: ATQ0 V1 E1 Z -- OK ttyS10<*1>: ATQ0 V1 E1 S0=0 -- OK ttyS10<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK ttyS10<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK ttyS10<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK ttyS10<*1>: Modem Identifier: ATI -- Sony Ericsson Z530 ttyS10<*1>: Speed 4800: AT -- OK ttyS10<*1>: Speed 9600: AT -- OK ttyS10<*1>: Speed 19200: AT -- OK ttyS10<*1>: Speed 38400: AT -- OK ttyS10<*1>: Speed 57600: AT -- OK ttyS10<*1>: Speed 115200: AT -- OK ttyS10<*1>: Speed 230400: AT -- OK ttyS10<*1>: Speed 460800: AT -- OK ttyS10<*1>: Max speed is 460800; that should be safe. ttyS10<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK WvModem<*1>: Cannot get information for serial port. ttyACM0<*1>: ATQ0 V1 E1 -- OK ttyACM0<*1>: ATQ0 V1 E1 Z -- OK ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK ttyACM0<*1>: Modem Identifier: ATI -- Sony Ericsson Z530 ttyACM0<*1>: Speed 4800: AT -- OK ttyACM0<*1>: Speed 9600: AT -- OK ttyACM0<*1>: Speed 19200: AT -- OK ttyACM0<*1>: Speed 38400: AT -- OK ttyACM0<*1>: Speed 57600: AT -- OK ttyACM0<*1>: Speed 115200: AT -- OK ttyACM0<*1>: Speed 230400: AT -- OK ttyACM0<*1>: Speed 460800: AT -- OK ttyACM0<*1>: Max speed is 460800; that should be safe. ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK WvModem<*1>: Cannot get information for serial port. ttyACM1<*1>: ATQ0 V1 E1 -- OK ttyACM1<*1>: ATQ0 V1 E1 Z -- OK ttyACM1<*1>: ATQ0 V1 E1 S0=0 -- OK ttyACM1<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK ttyACM1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK ttyACM1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK ttyACM1<*1>: Modem Identifier: ATI -- Sony Ericsson Z530 ttyACM1<*1>: Speed 4800: AT -- OK ttyACM1<*1>: Speed 9600: AT -- OK ttyACM1<*1>: Speed 19200: AT -- OK ttyACM1<*1>: Speed 38400: AT -- OK ttyACM1<*1>: Speed 57600: AT -- OK ttyACM1<*1>: Speed 115200: AT -- OK ttyACM1<*1>: Speed 230400: AT -- OK ttyACM1<*1>: Speed 460800: AT -- OK ttyACM1<*1>: Max speed is 460800; that should be safe. ttyACM1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK Found a modem on /dev/ttyS10. Modem configuration written to newconffile. ttyS10<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" ttyACM0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" ttyACM1<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" [EMAIL PROTECTED] ~]# [EMAIL PROTECTED] ~]# cat newconffile [Dialer Defaults] Modem = /dev/ttyS10 Baud = 460800 Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ISDN = 0 Modem Type = Analog Modem ; Phone = <Target Phone Number> ; Username = <Your Login Name> ; Password = <Your Password> [EMAIL PROTECTED] ~]# ............................................................................ ...................................... The kannel logs ... 2008-11-14 19:04:56 [4736] [0] INFO: AT2[/dev/ttyS10]: configuration doesn't show modemtype. will autodetect 2008-11-14 19:04:56 [4736] [0] DEBUG: Started thread 6 (gw/smsc/smsc_at.c:at2_device_thread) 2008-11-14 19:04:56 [4736] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller) maps to pid 4736. 2008-11-14 19:04:56 [4736] [2] DEBUG: Thread 2 (gwlib/http.c:server_thread) maps to pid 4736. 2008-11-14 19:04:56 [4736] [3] DEBUG: Thread 3 (gw/bb_http.c:httpadmin_run) maps to pid 4736. 2008-11-14 19:04:56 [4736] [4] DEBUG: Thread 4 (gw/bb_boxc.c:sms_to_smsboxes) maps to pid 4736. 2008-11-14 19:04:56 [4736] [5] DEBUG: Thread 5 (gw/bb_boxc.c:smsboxc_run) maps to pid 4736. 2008-11-14 19:04:56 [4736] [0] DEBUG: Started thread 7 (gw/bb_smscconn.c:sms_router) 2008-11-14 19:04:56 [4736] [0] INFO: ---------------------------------------- 2008-11-14 19:04:56 [4736] [0] INFO: Kannel bearerbox II version 1.4.1 starting 2008-11-14 19:04:56 [4736] [0] ERROR: fopen failed: couldn't open `/tmp/kannel/kannel.store' 2008-11-14 19:04:56 [4736] [0] ERROR: System error 2: No such file or directory 2008-11-14 19:04:56 [4736] [0] ERROR: fopen failed: couldn't open `/tmp/kannel/kannel.store.new' 2008-11-14 19:04:56 [4736] [0] ERROR: System error 2: No such file or directory 2008-11-14 19:04:56 [4736] [0] ERROR: fopen failed: couldn't open `/tmp/kannel/kannel.store.bak' 2008-11-14 19:04:56 [4736] [0] ERROR: System error 2: No such file or directory 2008-11-14 19:04:56 [4736] [0] INFO: Cannot open any store file, starting a new one 2008-11-14 19:04:56 [4736] [0] DEBUG: Started thread 8 (gw/bb_store.c:store_dumper) 2008-11-14 19:04:56 [4736] [0] INFO: MAIN: Start-up done, entering mainloop 2008-11-14 19:04:56 [4736] [0] DEBUG: AT2[/dev/ttyS10]: start called 2008-11-14 19:04:56 [4736] [6] DEBUG: Thread 6 (gw/smsc/smsc_at.c:at2_device_thread) maps to pid 4736. 2008-11-14 19:04:56 [4736] [6] DEBUG: AT2[/dev/ttyS10]: detecting modem speed. 2008-11-14 19:04:56 [4736] [6] INFO: AT2[/dev/ttyS10]: opening device 2008-11-14 19:04:56 [4736] [7] DEBUG: Thread 7 (gw/bb_smscconn.c:sms_router) maps to pid 4736. 2008-11-14 19:04:56 [4736] [7] DEBUG: sms_router: time to sleep 30.00 secs. 2008-11-14 19:04:56 [4736] [7] DEBUG: sms_router: gwlist_len = 0 2008-11-14 19:04:56 [4736] [8] DEBUG: Thread 8 (gw/bb_store.c:store_dumper) maps to pid 4736. 2008-11-14 19:04:56 [4736] [8] DEBUG: Dumping 0 messages to store 2008-11-14 19:04:56 [4736] [6] DEBUG: AT2[/dev/ttyS10]: device opened 2008-11-14 19:04:57 [4736] [6] DEBUG: AT2[/dev/ttyS10]: device opened 2008-11-14 19:04:57 [4736] [6] INFO: AT2[/dev/ttyS10]: speed set to 115200 2008-11-14 19:04:57 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> ^M 2008-11-14 19:04:59 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> AT^M 2008-11-14 19:04:59 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- OK 2008-11-14 19:04:59 [4736] [6] INFO: AT2[/dev/ttyS10]: closing device 2008-11-14 19:04:59 [4736] [6] INFO: AT2[/dev/ttyS10]: detect speed is 115200 2008-11-14 19:04:59 [4736] [6] DEBUG: AT2[/dev/ttyS10]: detecting modem type 2008-11-14 19:04:59 [4736] [6] INFO: AT2[/dev/ttyS10]: opening device 2008-11-14 19:04:59 [4736] [6] DEBUG: AT2[/dev/ttyS10]: device opened 2008-11-14 19:05:00 [4736] [6] DEBUG: AT2[/dev/ttyS10]: device opened 2008-11-14 19:05:00 [4736] [6] INFO: AT2[/dev/ttyS10]: speed set to 115200 2008-11-14 19:05:00 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> ^M 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> AT^M 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- OK 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> AT&F^M 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- OK 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> ATE0^M 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- ATE0 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- OK 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> ATI^M 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- Sony Ericsson Z530 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- OK 2008-11-14 19:05:02 [4736] [6] DEBUG: Loading include file `/etc/modems.conf' (on line 42 of file /etc/gsm-sms-kannel.conf). 2008-11-14 19:05:02 [4736] [6] DEBUG: Loading include file `/etc/modems.conf' (on line 42 of file /etc/gsm-sms-kannel.conf). 2008-11-14 19:05:02 [4736] [6] DEBUG: Loading include file `/etc/modems.conf' (on line 42 of file /etc/gsm-sms-kannel.conf). 2008-11-14 19:05:02 [4736] [6] DEBUG: Loading include file `/etc/modems.conf' (on line 42 of file /etc/gsm-sms-kannel.conf). 2008-11-14 19:05:02 [4736] [6] DEBUG: Loading include file `/etc/modems.conf' (on line 42 of file /etc/gsm-sms-kannel.conf). 2008-11-14 19:05:02 [4736] [6] DEBUG: Loading include file `/etc/modems.conf' (on line 42 of file /etc/gsm-sms-kannel.conf). 2008-11-14 19:05:02 [4736] [6] DEBUG: Loading include file `/etc/modems.conf' (on line 42 of file /etc/gsm-sms-kannel.conf). 2008-11-14 19:05:02 [4736] [6] DEBUG: Loading include file `/etc/modems.conf' (on line 42 of file /etc/gsm-sms-kannel.conf). 2008-11-14 19:05:02 [4736] [6] DEBUG: Loading include file `/etc/modems.conf' (on line 42 of file /etc/gsm-sms-kannel.conf). 2008-11-14 19:05:02 [4736] [6] DEBUG: Loading include file `/etc/modems.conf' (on line 42 of file /etc/gsm-sms-kannel.conf). 2008-11-14 19:05:02 [4736] [6] DEBUG: Loading include file `/etc/modems.conf' (on line 42 of file /etc/gsm-sms-kannel.conf). 2008-11-14 19:05:02 [4736] [6] DEBUG: Loading include file `/etc/modems.conf' (on line 42 of file /etc/gsm-sms-kannel.conf). 2008-11-14 19:05:02 [4736] [6] DEBUG: Loading include file `/etc/modems.conf' (on line 42 of file /etc/gsm-sms-kannel.conf). 2008-11-14 19:05:02 [4736] [6] DEBUG: Loading include file `/etc/modems.conf' (on line 42 of file /etc/gsm-sms-kannel.conf). 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: Cannot detect modem, using generic 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: Reading modem definitions from </etc/gsm-sms-kannel.conf> 2008-11-14 19:05:02 [4736] [6] DEBUG: Loading include file `/etc/modems.conf' (on line 42 of file /etc/gsm-sms-kannel.conf). 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: Found <13> modems in config 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> AT+CSMS=?^M 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- +CSMS: (0) 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- OK 2008-11-14 19:05:02 [4736] [6] INFO: AT2[/dev/ttyS10]: closing device 2008-11-14 19:05:02 [4736] [6] INFO: AT2[/dev/ttyS10]: opening device 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: device opened 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: device opened 2008-11-14 19:05:02 [4736] [6] INFO: AT2[/dev/ttyS10]: init device 2008-11-14 19:05:02 [4736] [6] INFO: AT2[/dev/ttyS10]: speed set to 115200 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> ATZ^M 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- OK 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> AT^M 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- OK 2008-11-14 19:05:02 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> AT&F^M 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- OK 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> ATE0^M 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- ATE0 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- OK 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> AT+IFC=2,2^M 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- OK 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> AT+CPIN?^M 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- +CPIN: READY 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- OK 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> AT+CMGF=0^M 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- OK 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> AT+CSMS=?^M 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- +CSMS: (0) 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- OK 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> AT+CNMI=1,2,0,1,0^M 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- +CMS ERROR: 303 2008-11-14 19:05:03 [4736] [6] ERROR: AT2[/dev/ttyS10]: CMS ERROR: +CMS ERROR: 303 2008-11-14 19:05:03 [4736] [6] ERROR: AT2[/dev/ttyS10]: CMS ERROR: Operation not supported (303) 2008-11-14 19:05:03 [4736] [6] ERROR: AT2[/dev/ttyS10]: Opening failed. Terminating 2008-11-14 19:05:03 [4736] [6] INFO: AT2[/dev/ttyS10]: closing device 2008-11-14 19:05:03 [4736] [6] INFO: AT2[/dev/ttyS10]: opening device 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: device opened 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: device opened 2008-11-14 19:05:03 [4736] [6] INFO: AT2[/dev/ttyS10]: init device 2008-11-14 19:05:03 [4736] [6] INFO: AT2[/dev/ttyS10]: speed set to 115200 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> ATZ^M 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- OK 2008-11-14 19:05:03 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> AT^M 2008-11-14 19:05:04 [4736] [6] DEBUG: AT2[/dev/ttyS10]: <-- OK 2008-11-14 19:05:04 [4736] [6] DEBUG: AT2[/dev/ttyS10]: --> AT&F^M ............................................................................ ......................................
