Hi Nikos Balkanas,

Thanks for your fast replies, i will try to configure according to your
direction.

Regards

-adhit-

On Tue, Mar 3, 2009 at 8:04 AM, Nikos Balkanas <[email protected]> wrote:

>  Hi,
>
> Bearerbox doesn't know where to route your incoming messages. You need to
> define an smsbox-route group. You may also need to define a catch-all in
> your default sms-service group.
>
> Lastly, please post relevant log entries, citing the problem from your
> bearerbox. Your posted bearerbox logs are irrelevant and make helping you
> difficult.
>
> BR,
> Nikos
>
> ----- Original Message -----
> *From:* Adhityo Priyambodo <[email protected]>
> *To:* [email protected]
> *Sent:* Tuesday, March 03, 2009 2:37 AM
> *Subject:* Re: Can't Execute get-url from sms-service (sending OK) with
> ITegno 3800
>
> I forgot to tell my testing environment:
>
> Ubuntu Server Gutsy
> Kannel 1.4.2
> ITegno 3800
>
> Thanks
>
> -adhit-
>
> On Tue, Mar 3, 2009 at 7:29 AM, Adhityo Priyambodo <
> [email protected]> wrote:
>
>> Dear All,
>>
>> I would like to ask about handling incoming message that received by
>> kannel.
>>
>> I have setup kannel with ITegno 3800 GSM Modem and i have tested it for
>> sms outgoing and it works fine.
>>
>> But when the modem received incoming messages, it didn't execute get-url i
>> have stated at the configuration.
>>
>> It's quite strage since there were no errors popped out at the
>> bearerbox.log.
>>
>> If i take a look at access.log i have these messages which indicate that
>> the modem received messages.
>>
>> I'm still wondering what makes it can't execute the get-url? configuration
>> or the GSM modem compatibility?
>>
>> Any help is really appreciated.
>>
>>
>> Best Regards
>>
>> -adhit-
>>
>> ---------------------------------- LOG SNIPPET
>> -------------------------------------
>>
>> access.log
>>
>> 2009-03-03 07:53:20 Receive SMS [SMSC:GSMModem] [SVC:] [ACT:] [BINF:]
>> [from:+628389066XXXX] [to:1234] [flags:-1:0:-1:0:-1] [msg:6:Test i] [udh:0:]
>> 2009-03-03 08:06:47 Log ends
>> 2009-03-03 08:06:50 Log begins
>> 2009-03-03 08:07:30 Receive SMS [SMSC:GSMModem] [SVC:] [ACT:] [BINF:]
>> [from:+628389066XXXX] [to:1234] [flags:-1:0:-1:0:-1] [msg:10:RJ TESTING]
>> [udh:0:]
>> 2009-03-03 09:54:53 Log ends
>> 2009-03-03 09:54:53 Log begins
>> 2009-03-03 14:32:25 Log begins
>> 2009-03-03 14:32:56 Receive SMS [SMSC:GSMModem] [SVC:] [ACT:] [BINF:]
>> [from:+628389066XXXX] [to:1234] [flags:-1:0:-1:0:-1] [msg:7:RJ TEST]
>> [udh:0:]
>> 2009-03-03 14:34:29 Receive SMS [SMSC:GSMModem] [SVC:] [ACT:] [BINF:]
>> [from:+628389066XXXX] [to:1234] [flags:-1:0:-1:0:-1] [msg:7:RM TEST]
>> [udh:0:]
>>
>>
>> bearerbox.log
>>
>>
>> 2009-03-03 14:32:56 [3440] [6] DEBUG: AT2[GSMModem]: <-- +CMT: ,27
>> 2009-03-03 14:32:56 [3440] [6] DEBUG: AT2[GSMModem]: <--
>> 0791263851000023240D91263898605621F3000090303060637582075225885A9C5201
>> 2009-03-03 14:32:56 [3440] [6] DEBUG: AT2[GSMModem]: received message from
>> SMSC: +628315000032
>> 2009-03-03 14:32:56 [3440] [6] DEBUG: AT2[GSMModem]: Numeric sender
>> (international) <+6283890665123>
>> 2009-03-03 14:32:56 [3440] [6] DEBUG: AT2[GSMModem]: User data length read
>> as (7)
>> 2009-03-03 14:32:56 [3440] [6] DEBUG: AT2[GSMModem]: Udh decoding done
>> len=7 udhi=0 udhlen=0 udh=''
>> 2009-03-03 14:32:56 [3440] [6] WARNING: smsbox_list empty!
>> 2009-03-03 14:32:56 [3440] [6] DEBUG: AT2[GSMModem]: --> AT+CNMA^M
>> 2009-03-03 14:32:56 [3440] [6] DEBUG: AT2[GSMModem]: <-- OK
>> 2009-03-03 14:32:58 [3440] [6] DEBUG: AT2[GSMModem]: --> AT+CPMS?^M
>> 2009-03-03 14:32:58 [3440] [6] DEBUG: AT2[GSMModem]: <-- +CPMS:
>> "SM",0,25,"SM",0,25,"SM",0,25
>> 2009-03-03 14:32:58 [3440] [6] DEBUG: AT2[GSMModem]: <-- OK
>> 2009-03-03 14:33:10 [3440] [15] DEBUG: Dumping 9 messages to store
>>
>>
>>
>> This is my kannel configuration content
>>
>>
>> #
>> # Sample configuration file for Kannel bearerbox on Debian.
>> # See the documentation for explanations of fields.
>> #
>>
>> # HTTP administration is disabled by default. Make sure you set the
>> # password if you enable it.
>>
>> group = core
>> admin-port = 13000
>> smsbox-port = 13001
>> admin-password = bar
>> admin-deny-ip = "*.*.*.*"
>> admin-allow-ip = ""
>> wapbox-port = 13002
>> wdp-interface-name = "*"
>> log-file = "/var/log/kannel/bearerbox.log"
>> access-log = "/var/log/kannel/access.log"
>> store-file = "/var/log/kannel/kannel.log"
>> box-deny-ip = "*.*.*.*"
>> box-allow-ip = "127.0.0.1"
>> log-level = 0
>>
>> group = wapbox
>> bearerbox-host = localhost
>> log-file = "/var/log/kannel/wapbox.log"
>>
>> #SMS Connection
>> group = smsc
>> smsc = at
>> smsc-id = GSMModem
>> modemtype = iTegno
>> device = /dev/ttyUSB0
>> speed = 115200
>> sim-buffering = true
>> pin = 1234
>>
>> #Modems
>> group = modems
>> id = iTegno
>> detect-string = "WAVECOM"
>> detect-string2 = "MODEM"
>> need-sleep = true
>> log-level = 0
>>
>> group = wapbox
>> bearerbox-host = localhost
>> log-file = "/var/log/kannel/wapbox.log"
>>
>> #SMS Connection
>> group = smsc
>> smsc = at
>> smsc-id = GSMModem
>> modemtype = iTegno
>> device = /dev/ttyUSB0
>> speed = 115200
>> sim-buffering = true
>> pin = 1234
>>
>> #Modems
>> group = modems
>> id = iTegno
>> detect-string = "WAVECOM"
>> detect-string2 = "MODEM"
>> need-sleep = true
>> sendline-sleep = 10
>> message-storage = "SM"
>> init-string = "AT+CNMI=1,2,0,1,0;+CMEE=1"
>>
>> #SMSBOX
>> group = smsbox
>> smsbox-id = SMSbox
>> sendsms-port = 13013
>> sendsms-chars = "0123456789+"
>> log-file = "/var/log/kannel/smsbox.log"
>> log-level = 0
>>
>> #SEND SMS USERS
>> group = sendsms-user
>> username = smsgateway
>> password = 5m5gatew4y
>>
>> #group = sms-service
>> #keyword = "RJ"
>> #get-url = "http://192.168.15.213/TPA/sms?jenis=RJ&sender=%p&isi=%a";
>> #accept-x-kannel-headers = true
>> #max-messages = 0
>> #contatenation = true
>>
>>
>> group = sms-service
>> keyword = default
>> get-url = "http://192.168.15.213/TPA/sms?jenis=RM&sender=%p&isi=%a";
>>
>>
>

Reply via email to