Hi, Kill all kannel processes if any.
>From a shell type: bearerbox -v 0 <conffile> >From another shell type smsbox -v 0 <conffile> Post your logs. BR, Nikos ----- Original Message ----- From: Adhityo Priyambodo To: [email protected] Sent: Tuesday, March 03, 2009 3:39 AM Subject: Re: Can't Execute get-url from sms-service (sending OK) with ITegno 3800 Hello, I've tried adding smsbox-route configuration but it seems the kannel is not working (not producing any log/can't send outgoing either) are there any mistakes in my kannel configuration ?. group = smsbox-route smsbox-id = SMSbox smsc-id = GSMModem group = smsbox smsbox-id = SMSbox sendsms-port = 13013 sendsms-chars = "0123456789+" log-file = "/var/log/kannel/smsbox.log" log-level = 0 #SMS Connection group = smsc smsc = at smsc-id = GSMModem modemtype = iTegno device = /dev/ttyUSB0 speed = 115200 sim-buffering = true log-level = 0 pin = 1234 Thanks -adhit- On Tue, Mar 3, 2009 at 8:09 AM, Adhityo Priyambodo <[email protected]> wrote: Hi Nikos Balkanas, Thanks for your fast replies, i will try to configure according to your direction. Regards -adhit- On Tue, Mar 3, 2009 at 8:04 AM, Nikos Balkanas <[email protected]> wrote: Hi, Bearerbox doesn't know where to route your incoming messages. You need to define an smsbox-route group. You may also need to define a catch-all in your default sms-service group. Lastly, please post relevant log entries, citing the problem from your bearerbox. Your posted bearerbox logs are irrelevant and make helping you difficult. BR, Nikos ----- Original Message ----- From: Adhityo Priyambodo To: [email protected] Sent: Tuesday, March 03, 2009 2:37 AM Subject: Re: Can't Execute get-url from sms-service (sending OK) with ITegno 3800 I forgot to tell my testing environment: Ubuntu Server Gutsy Kannel 1.4.2 ITegno 3800 Thanks -adhit- On Tue, Mar 3, 2009 at 7:29 AM, Adhityo Priyambodo <[email protected]> wrote: Dear All, I would like to ask about handling incoming message that received by kannel. I have setup kannel with ITegno 3800 GSM Modem and i have tested it for sms outgoing and it works fine. But when the modem received incoming messages, it didn't execute get-url i have stated at the configuration. It's quite strage since there were no errors popped out at the bearerbox.log. If i take a look at access.log i have these messages which indicate that the modem received messages. I'm still wondering what makes it can't execute the get-url? configuration or the GSM modem compatibility? Any help is really appreciated. Best Regards -adhit- ---------------------------------- LOG SNIPPET ------------------------------------- access.log 2009-03-03 07:53:20 Receive SMS [SMSC:GSMModem] [SVC:] [ACT:] [BINF:] [from:+628389066XXXX] [to:1234] [flags:-1:0:-1:0:-1] [msg:6:Test i] [udh:0:] 2009-03-03 08:06:47 Log ends 2009-03-03 08:06:50 Log begins 2009-03-03 08:07:30 Receive SMS [SMSC:GSMModem] [SVC:] [ACT:] [BINF:] [from:+628389066XXXX] [to:1234] [flags:-1:0:-1:0:-1] [msg:10:RJ TESTING] [udh:0:] 2009-03-03 09:54:53 Log ends 2009-03-03 09:54:53 Log begins 2009-03-03 14:32:25 Log begins 2009-03-03 14:32:56 Receive SMS [SMSC:GSMModem] [SVC:] [ACT:] [BINF:] [from:+628389066XXXX] [to:1234] [flags:-1:0:-1:0:-1] [msg:7:RJ TEST] [udh:0:] 2009-03-03 14:34:29 Receive SMS [SMSC:GSMModem] [SVC:] [ACT:] [BINF:] [from:+628389066XXXX] [to:1234] [flags:-1:0:-1:0:-1] [msg:7:RM TEST] [udh:0:] bearerbox.log 2009-03-03 14:32:56 [3440] [6] DEBUG: AT2[GSMModem]: <-- +CMT: ,27 2009-03-03 14:32:56 [3440] [6] DEBUG: AT2[GSMModem]: <-- 0791263851000023240D91263898605621F3000090303060637582075225885A9C5201 2009-03-03 14:32:56 [3440] [6] DEBUG: AT2[GSMModem]: received message from SMSC: +628315000032 2009-03-03 14:32:56 [3440] [6] DEBUG: AT2[GSMModem]: Numeric sender (international) <+6283890665123> 2009-03-03 14:32:56 [3440] [6] DEBUG: AT2[GSMModem]: User data length read as (7) 2009-03-03 14:32:56 [3440] [6] DEBUG: AT2[GSMModem]: Udh decoding done len=7 udhi=0 udhlen=0 udh='' 2009-03-03 14:32:56 [3440] [6] WARNING: smsbox_list empty! 2009-03-03 14:32:56 [3440] [6] DEBUG: AT2[GSMModem]: --> AT+CNMA^M 2009-03-03 14:32:56 [3440] [6] DEBUG: AT2[GSMModem]: <-- OK 2009-03-03 14:32:58 [3440] [6] DEBUG: AT2[GSMModem]: --> AT+CPMS?^M 2009-03-03 14:32:58 [3440] [6] DEBUG: AT2[GSMModem]: <-- +CPMS: "SM",0,25,"SM",0,25,"SM",0,25 2009-03-03 14:32:58 [3440] [6] DEBUG: AT2[GSMModem]: <-- OK 2009-03-03 14:33:10 [3440] [15] DEBUG: Dumping 9 messages to store This is my kannel configuration content # # Sample configuration file for Kannel bearerbox on Debian. # See the documentation for explanations of fields. # # HTTP administration is disabled by default. Make sure you set the # password if you enable it. group = core admin-port = 13000 smsbox-port = 13001 admin-password = bar admin-deny-ip = "*.*.*.*" admin-allow-ip = "" wapbox-port = 13002 wdp-interface-name = "*" log-file = "/var/log/kannel/bearerbox.log" access-log = "/var/log/kannel/access.log" store-file = "/var/log/kannel/kannel.log" box-deny-ip = "*.*.*.*" box-allow-ip = "127.0.0.1" log-level = 0 group = wapbox bearerbox-host = localhost log-file = "/var/log/kannel/wapbox.log" #SMS Connection group = smsc smsc = at smsc-id = GSMModem modemtype = iTegno device = /dev/ttyUSB0 speed = 115200 sim-buffering = true pin = 1234 #Modems group = modems id = iTegno detect-string = "WAVECOM" detect-string2 = "MODEM" need-sleep = true log-level = 0 group = wapbox bearerbox-host = localhost log-file = "/var/log/kannel/wapbox.log" #SMS Connection group = smsc smsc = at smsc-id = GSMModem modemtype = iTegno device = /dev/ttyUSB0 speed = 115200 sim-buffering = true pin = 1234 #Modems group = modems id = iTegno detect-string = "WAVECOM" detect-string2 = "MODEM" need-sleep = true sendline-sleep = 10 message-storage = "SM" init-string = "AT+CNMI=1,2,0,1,0;+CMEE=1" #SMSBOX group = smsbox smsbox-id = SMSbox sendsms-port = 13013 sendsms-chars = "0123456789+" log-file = "/var/log/kannel/smsbox.log" log-level = 0 #SEND SMS USERS group = sendsms-user username = smsgateway password = 5m5gatew4y #group = sms-service #keyword = "RJ" #get-url = "http://192.168.15.213/TPA/sms?jenis=RJ&sender=%p&isi=%a"; #accept-x-kannel-headers = true #max-messages = 0 #contatenation = true group = sms-service keyword = default get-url = "http://192.168.15.213/TPA/sms?jenis=RM&sender=%p&isi=%a";
