Hi,
You should always use loglevel 0 when posting logs. I assume these are from
/dev/ttyUSB0
You can verify your modem from /proc (/proc/tty/driver/?)
If that fails, assuming you have linux, download and install minicom from an
rpm and try to find it by hand.
BR,
Nikos
----- Original Message -----
From: "Paul Darius" <pauldar...@gmail.com>
To: "Alvaro Cornejo" <cornejo.alv...@gmail.com>
Cc: <users@kannel.org>
Sent: Saturday, March 21, 2009 8:05 AM
Subject: Re: Need help for kannel configuration
This is what shown on the console screen...
2009-03-21 13:02:01 [0] INFO: Added logfile
`/var/log/kannel/bearerbox.log' with level `1'.
2009-03-21 13:02:01 [0] INFO: ----------------------------------------
2009-03-21 13:02:01 [0] INFO: Kannel bearerbox II version 1.2.0 starting
2009-03-21 13:02:01 [0] INFO: SSL not supported, no SSL initialization
done.
2009-03-21 13:02:01 [0] DEBUG: HTTP: Opening server at port 13000.
2009-03-21 13:02:01 [0] DEBUG: Started thread 1 (gwlib/fdset.c:poller)
2009-03-21 13:02:01 [0] DEBUG: Started thread 2
(gwlib/http.c:server_thread)
2009-03-21 13:02:01 [0] DEBUG: Started thread 3
(gw/bb_http.c:httpadmin_run)
2009-03-21 13:02:01 [0] DEBUG: starting smsbox connection module
2009-03-21 13:02:01 [0] DEBUG: Started thread 4 (gw/bb_boxc.c:smsboxc_run)
2009-03-21 13:02:01 [0] DEBUG: AT: Command: AT
2009-03-21 13:02:02 [0] DEBUG: Read from modem: ''
2009-03-21 13:02:02 [0] DEBUG: AT: Command: AT&F
2009-03-21 13:02:03 [0] DEBUG: Read from modem: ''
2009-03-21 13:02:03 [0] DEBUG: AT: Command: AT
2009-03-21 13:02:04 [0] DEBUG: Read from modem: ''
2009-03-21 13:02:04 [0] DEBUG: AT: Command: ATE0
2009-03-21 13:02:05 [0] DEBUG: Read from modem: ''
2009-03-21 13:02:05 [0] ERROR: Failed to create Smsc wrapper
2009-03-21 13:02:05 [0] PANIC: Cannot start with SMSC connection failing
Paul
On Sat, Mar 21, 2009 at 9:44 AM, Alvaro Cornejo
<cornejo.alv...@gmail.com> wrote:
Ti you get some info with kannel, post the logs to see where the problem
is. Log should tell you wich command failed. Check your device manual
for specific command values/syntax
Alvaro
