Hi,
This is the wrong group. Please ask wvdial questions to wvdial group,
kannel's issues to this group.
BR,
Nikos
----- Original Message -----
From: "ravurisuman" <[email protected]>
To: <[email protected]>
Sent: Saturday, July 18, 2009 9:56 PM
Subject: Re: ATI command is undefined
I ran wvdialconf command for my modem and I got the following output
Scanning your serial ports for a modem.
Modem Port Scan<*1>: S0 S1 S2 S3
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 Z -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB0<*1>: Modem Identifier: ATI -- Undefined
ttyUSB0<*1>: Speed 230400: AT --
ttyUSB0<*1>: Speed 230400: AT --
ttyUSB0<*1>: Speed 230400: AT -- xοΏ½οΏ½
ttyUSB0<*1>: Max speed is 115200; that should be safe.
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
Found a modem on /dev/ttyUSB0.
Modem configuration written to /etc/wvdial.conf.
ttyUSB0<Info>: Speed 115200; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
It is saying ATI command is not defined, As ATI command is not defined it is
unable to detect the modem and when I start bearer box I am getting the
following error.
: Cannot detect modem, using generic
2009-07-19 12:19:23 [3006] [6] DEBUG: AT2[/dev/ttyUSB0]: Reading modem
definitions from </etc/kannelworking.conf>
2009-07-19 12:19:23 [3006] [6] DEBUG: AT2[/dev/ttyUSB0]: Found <1> modems in
config
2009-07-19 12:19:23 [3006] [6] PANIC: AT2[/dev/ttyUSB0]: Cannot detect modem
and generic not found
2009-07-19 12:19:23 [3006] [6] PANIC: ./bearerbox(gw_panic+0xaf) [0x80ca29f]
2009-07-19 12:19:23 [3006] [6] PANIC: ./bearerbox [0x806c900]
2009-07-19 12:19:23 [3006] [6] PANIC: ./bearerbox [0x80c0d9d]
2009-07-19 12:19:23 [3006] [6] PANIC: /lib/libpthread.so.0 [0xb3d935]
2009-07-19 12:19:23 [3006] [6] PANIC: /lib/libc.so.6(clone+0x5e) [0xa7182e]
Please suggest if any one of you come across this problem.
Thanks,
Suman
ravurisuman wrote:
Hi All,
I am trying to configure kannel with 'TELTONIKA' GSM modem. I
used the following modem configuration.
# MODEM DEFINITIONS
group = modems
id = Teltonika
name = "Teltonika ModemUSB G10"
detect-string = "Teltonika"
init-string = "AT<cr>"
init-string = "ATE0V1<cr>"
init-string = "AT &C1 &D2 V1 S0=0<cr>"
I have not pasted remaining configuartion infromation as it is pretty
much same for all configurations. When I try to bearer box I got the
following error in logs.
009-07-18 23:47:23 [3254] [0] INFO:
----------------------------------------
2009-07-18 23:47:23 [3254] [0] INFO: Kannel bearerbox II version 1.4.3
starting
2009-07-18 23:47:23 [3254] [0] INFO: MAIN: Start-up done, entering
mainloop
2009-07-18 23:47:23 [3254] [0] DEBUG: AT2[/dev/ttyUSB0]: start called
2009-07-18 23:47:24 [3254] [6] DEBUG: AT2[/dev/ttyUSB0]: device opened
2009-07-18 23:47:24 [3254] [6] INFO: AT2[/dev/ttyUSB0]: speed set to
115200
2009-07-18 23:47:24 [3254] [6] DEBUG: AT2[/dev/ttyUSB0]: --> ^M
2009-07-18 23:47:26 [3254] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT^M
2009-07-18 23:47:26 [3254] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- AT
2009-07-18 23:47:26 [3254] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK
2009-07-18 23:47:26 [3254] [6] INFO: AT2[/dev/ttyUSB0]: Closing device
2009-07-18 23:47:26 [3254] [6] INFO: AT2[/dev/ttyUSB0]: detect speed is
115200
2009-07-18 23:47:26 [3254] [6] DEBUG: AT2[/dev/ttyUSB0]: detecting modem
type
2009-07-18 23:47:26 [3254] [6] INFO: AT2[/dev/ttyUSB0]: opening device
2009-07-18 23:47:26 [3254] [6] DEBUG: AT2[/dev/ttyUSB0]: device opened.
Telnet mode = 0
2009-07-18 23:47:27 [3254] [6] DEBUG: AT2[/dev/ttyUSB0]: device opened
2009-07-18 23:47:27 [3254] [6] INFO: AT2[/dev/ttyUSB0]: speed set to
115200
2009-07-18 23:47:27 [3254] [6] DEBUG: AT2[/dev/ttyUSB0]: --> ^M
2009-07-18 23:47:29 [3254] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT^M
2009-07-18 23:47:29 [3254] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- AT
2009-07-18 23:47:29 [3254] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK
2009-07-18 23:47:29 [3254] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT&F^M
2009-07-18 23:47:29 [3254] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- AT&F
2009-07-18 23:47:29 [3254] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- ERROR
2009-07-18 23:47:29 [3254] [6] ERROR: AT2[/dev/ttyUSB0]: Generic error:
ERROR
I think GSM modem I am using is unable to detect the AT&F command. GSM
modem I am using is TELTONIKA G10 modem, I tried to get some information
about this modem, but user guide is not useful to me.
Thanks,
Suman
--
View this message in context:
http://www.nabble.com/Unable-to-connecy-to-teltonika-gsm-modem-tp24545192p24550828.html
Sent from the Kannel - User mailing list archive at Nabble.com.
