Hi Nikos,
Thanks for the information. Now I cleaned modems group, but
still having problem with ATI command. When I run wvdialconf it says ATI
command is undefined.
# MODEM DEFINITIONS
group = modems
id = teltonika
name = "Teltonika G10"
detect-string = "Teltonika"
init-string = "ATZ"
init-string = "AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
Error:
2009-07-19 12:48:45 [3137] [6] DEBUG: AT2[/dev/ttyUSB0]: device opened.
Telnet mode = 0
2009-07-19 12:48:46 [3137] [6] DEBUG: AT2[/dev/ttyUSB0]: device opened
2009-07-19 12:48:46 [3137] [6] INFO: AT2[/dev/ttyUSB0]: speed set to 115200
2009-07-19 12:48:46 [3137] [6] DEBUG: AT2[/dev/ttyUSB0]: --> ^M
2009-07-19 12:48:48 [3137] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT^M
2009-07-19 12:48:48 [3137] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- AT
2009-07-19 12:48:48 [3137] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK
2009-07-19 12:48:48 [3137] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT&F^M
2009-07-19 12:48:48 [3137] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- AT&F
2009-07-19 12:48:48 [3137] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK
2009-07-19 12:48:48 [3137] [6] DEBUG: AT2[/dev/ttyUSB0]: --> ATE0^M
2009-07-19 12:48:48 [3137] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- ATE0
2009-07-19 12:48:48 [3137] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK
2009-07-19 12:48:48 [3137] [6] DEBUG: AT2[/dev/ttyUSB0]: --> ATI^M
2009-07-19 12:48:48 [3137] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- Undefined
2009-07-19 12:48:48 [3137] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK
2009-07-19 12:48:48 [3137] [6] DEBUG: AT2[/dev/ttyUSB0]: Cannot detect
modem, using generic
2009-07-19 12:48:48 [3137] [6] DEBUG: AT2[/dev/ttyUSB0]: Reading modem
definitions from </etc/kannelworking.conf>
2009-07-19 12:48:48 [3137] [6] DEBUG: AT2[/dev/ttyUSB0]: Found <1> modems in
config
2009-07-19 12:48:48 [3137] [6] PANIC: AT2[/dev/ttyUSB0]: Cannot detect modem
and generic not found
2009-07-19 12:48:48 [3137] [6] PANIC: ./bearerbox(gw_panic+0xaf) [0x80ca29f]
2009-07-19 12:48:48 [3137] [6] PANIC: ./bearerbox [0x806c900]
2009-07-19 12:48:48 [3137] [6] PANIC: ./bearerbox [0x80c0d9d]
2009-07-19 12:48:48 [3137] [6] PANIC: /lib/libpthread.so.0 [0xb3d935]
2009-07-19 12:48:48 [3137] [6] PANIC: /lib/libc.so.6(clone+0x5e) [0xa7182e]
Not sure what to do if ATI command does not work. Please suggest me the way
out
Thanks,
Suman
2009/7/19 Nikos Balkanas <[email protected]>
> Hi,
>
> This is a very common configuration mistake. Users keep configuring a bunch
> of init-scripts, and they expect that all of them will be given to the
> modem. In fact, the way configuration works in kannel, only the first of
> those will be used. I suspect that If it is only "AT" or something
> inadequate, kannel will supplement its own values (AT&F ?).
>
> So, either concatenate everyting in 1 init-string like:
>
> init-string="ATE0V1 &C1 &D2 S0=0"
>
> or for better debuging or sequential multi-stage initialization:
>
> init-string="ATE0V1;AT &C1 &D2 S0=0"
>
> However skip the <cr>. :-)
>
> I don't know if that will fix your problem, but at least you should be able
> to initialize your modem the way you want to.
>
> BR,
> Nikos
> ----- Original Message ----- From: "ravurisuman" <[email protected]>
> To: <[email protected]>
> Sent: Saturday, July 18, 2009 9:48 AM
> Subject: Unable to connecy to teltonika gsm modem
>
>
>
>
>> Hi All,
>> I am trying to configure kannel with 'TELTONIKA' GSM modem. I used
>> the following modem configuration.
>>
>> # MODEM DEFINITIONS
>> group = modems
>> id = Teltonika
>> name = "Teltonika ModemUSB G10"
>> detect-string = "Teltonika"
>> init-string = "AT<cr>"
>> init-string = "ATE0V1<cr>"
>> init-string = "AT &C1 &D2 V1 S0=0<cr>"
>>
>> I have not pasted remaining configuartion infromation as it is pretty
>> much same for all configurations. When I try to bearer box I got the
>> following error in logs.
>>
>> 009-07-18 23:47:23 [3254] [0] INFO:
>> ----------------------------------------
>> 2009-07-18 23:47:23 [3254] [0] INFO: Kannel bearerbox II version 1.4.3
>> starting
>> 2009-07-18 23:47:23 [3254] [0] INFO: MAIN: Start-up done, entering
>> mainloop
>> 2009-07-18 23:47:23 [3254] [0] DEBUG: AT2[/dev/ttyUSB0]: start called
>> 2009-07-18 23:47:24 [3254] [6] DEBUG: AT2[/dev/ttyUSB0]: device opened
>> 2009-07-18 23:47:24 [3254] [6] INFO: AT2[/dev/ttyUSB0]: speed set to
>> 115200
>> 2009-07-18 23:47:24 [3254] [6] DEBUG: AT2[/dev/ttyUSB0]: --> ^M
>> 2009-07-18 23:47:26 [3254] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT^M
>> 2009-07-18 23:47:26 [3254] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- AT
>> 2009-07-18 23:47:26 [3254] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK
>> 2009-07-18 23:47:26 [3254] [6] INFO: AT2[/dev/ttyUSB0]: Closing device
>> 2009-07-18 23:47:26 [3254] [6] INFO: AT2[/dev/ttyUSB0]: detect speed is
>> 115200
>> 2009-07-18 23:47:26 [3254] [6] DEBUG: AT2[/dev/ttyUSB0]: detecting modem
>> type
>> 2009-07-18 23:47:26 [3254] [6] INFO: AT2[/dev/ttyUSB0]: opening device
>> 2009-07-18 23:47:26 [3254] [6] DEBUG: AT2[/dev/ttyUSB0]: device opened.
>> Telnet mode = 0
>> 2009-07-18 23:47:27 [3254] [6] DEBUG: AT2[/dev/ttyUSB0]: device opened
>> 2009-07-18 23:47:27 [3254] [6] INFO: AT2[/dev/ttyUSB0]: speed set to
>> 115200
>> 2009-07-18 23:47:27 [3254] [6] DEBUG: AT2[/dev/ttyUSB0]: --> ^M
>> 2009-07-18 23:47:29 [3254] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT^M
>> 2009-07-18 23:47:29 [3254] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- AT
>> 2009-07-18 23:47:29 [3254] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK
>> 2009-07-18 23:47:29 [3254] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT&F^M
>> 2009-07-18 23:47:29 [3254] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- AT&F
>> 2009-07-18 23:47:29 [3254] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- ERROR
>> 2009-07-18 23:47:29 [3254] [6] ERROR: AT2[/dev/ttyUSB0]: Generic error:
>> ERROR
>>
>> I think GSM modem I am using is unable to detect the AT&F command. GSM
>> modem I am using is TELTONIKA G10 modem, I tried to get some information
>> about this modem, but user guide is not useful to me.
>>
>>
>> Thanks,
>> Suman
>>
>>
>>
>> --
>> View this message in context:
>> http://www.nabble.com/Unable-to-connecy-to-teltonika-gsm-modem-tp24545192p24545192.html
>> Sent from the Kannel - User mailing list archive at Nabble.com.
>>
>>
>>
>
