Thanks for trying to help me... but no need to fight xD I tried first to send a SMS with UDH and on my mobile I get a SMS with an URL inside but no automatic launch of my web browser. *Is it normal ?*
I tried then to setup PPG on Kannel (wapbox & ppg config seems Ok, wapbox start) I send my document to HTTP interface of PPG port 8080 using a ¨PHP script I found on inet. I am getting the following errors: # lynx -dump "http://localhost/test/sms-wap-push-2.php"; HTTP/1.1 202 Accepted Server: Kannel/cvs-20091124 Date: Fri, 18 Dec 2009 03:26:50 GMT Content-Length: 705 Content-Type: application/xml ==> /var/log/kannel/wapbox.log <== 2009-12-18 14:26:50 [20985] [11] DEBUG: HTTP: Creating HTTPClient for `127.0.0.1'. 2009-12-18 14:26:50 [20985] [11] DEBUG: HTTP: Created HTTPClient area 0x954abf0. 2009-12-18 14:26:50 [20985] [14] INFO: PPG: Accept request </wappush> from <127.0.0.1> 2009-12-18 14:26:50 [20985] [14] DEBUG: PPG: http_read_thread: pap multipart accepted 2009-12-18 14:26:50 [20985] [14] DEBUG: *PPG: send_bad_message_response: telling pi* 2009-12-18 14:26:50 [20985] [14] DEBUG: HTTP: Resetting HTTPClient for `127.0.0.1'. 2009-12-18 14:26:50 [20985] [14] WARNING: *PPG: pap control entity erroneous, the request unacceptable* 2009-12-18 14:26:50 [20985] [10] DEBUG: HTTP: Destroying HTTPClient area 0x954abf0. 2009-12-18 14:26:50 [20985] [10] DEBUG: HTTP: Destroying HTTPClient for `127.0.0.1'. 2009/12/17 Nikos Balkanas <[email protected]> > Actually, Henri was just teaching me how to program. He has already a php > solution in place, I suspect yours. Poor Emmanuel was looking for a > solution, and I hope he found what he was looking for, amidst all the flame > :-) > > BR, > Nikos > > ----- Original Message ----- > *From:* Alejandro Guerrieri <[email protected]> > *To:* Nikos Balkanas <[email protected]> > *Cc:* Henri Hovi <[email protected]> ; users <[email protected]> > *Sent:* Thursday, December 17, 2009 2:33 PM > *Subject:* Re: HTTP connection URL through Binary SMS or PPG ? > > Did I get it all wrong, or Henri's only trying to send a WAP push to a > phone? > > If that's the case, I've made time ago a simple php function you could use: > > http://www.blogalex.com/archives/12 > > There's no need to implement the whole protocol just to send a simple URL. > However if you need more flexibility you'll probably need to use the PPG > instead. > > Regards, > > Alex > > 2009/12/17 Nikos Balkanas <[email protected]> > >> It's OK, don't tell me. I have been using KISS probably before you were >> born. If you want to do a proper job, you have to implement the whole spec. >> In other words it seems you can send only *certain* GET URLs to mobiles. >> Can you handle POST requests & variables? It sounds you don't use any >> stringtables or wap compression. How many SMS parts are you generating for a >> single push? PAP & SI variables determine delivery network, priority, >> validity period, etc. and it seems to me you are out of spec and abusing >> mobile phones (some of them may not even display it!). >> >> That's fine if it works for you. Just make sure you mention all your >> constraints before suggesting the same approach to others. >> >> Nikos >> >> ----- Original Message ----- >> *From:* Henri Hovi <[email protected]> >> *To:* Nikos Balkanas <[email protected]> >> *Cc:* Emmanuel CHANSON <[email protected]> ; users<[email protected]> >> *Sent:* Thursday, December 17, 2009 11:49 AM >> *Subject:* Re: HTTP connection URL through Binary SMS or PPG ? >> >> Target is to get phone opening a connection web-server to download >> something, You can use any compliers to compile the message or just simply >> construct the message by Yourself. With any link You like. >> >> I guarantee that just putting those couple of lines to Your code to build >> the message manually is more efficient than push XML to parser, compile it >> to WBXML and send it to the device. But of course, my script doesn't parse >> PAP messages, no need since why would I care about it since my aim is just >> to get the link to the device... >> >> Ever heard about term KISS ;) >> >> >> >> -- >> H >> >> >> >> >> >> >> >> 2009/12/17 Nikos Balkanas <[email protected]> >> >>> My God! Why did all these stupid kannel developers wrote 1000's of >>> lines for a descent wbxml compiler? Tokens alone from the spec are ~200, >>> patterns > 500 and many rules to consider. I have rewritten kannel's >>> wbxml compiler in flex and yacc for efficiency and you preach me about >>> efficiency? >>> >>> I was not aware of any php wbxml library, but unless you just encode the >>> same message over and over or use a library, there is no other way for you >>> to do it. Good for you, bad for efficiency. >>> >>> BR, >>> Nikos >>> >>> ----- Original Message ----- >>> *From:* Henri Hovi <[email protected]> >>> *To:* Nikos Balkanas <[email protected]> >>> *Cc:* Emmanuel CHANSON <[email protected]> ; users<[email protected]> >>> *Sent:* Thursday, December 17, 2009 11:00 AM >>> *Subject:* Re: HTTP connection URL through Binary SMS or PPG ? >>> >>> Well, I have aprx. ten lines and it works just fine ;) But for sure, sky >>> is the limit in coding, so if I like, I think I can use several thousands >>> lines as well to do the same, I just don't know if it's efficient or not ;) >>> >>> >>> -- >>> Henri >>> >>> 2009/12/17 Nikos Balkanas <[email protected]> >>> >>>> Just to clarify. There are php examples to do your own wbxml encoding >>>> through the sendsms interface, but the encoding is several hundred lines of >>>> code, not 10! >>>> Β >>>> BR, >>>> Nikos >>>> >>>> ----- Original Message ----- >>>> *From:* Henri Hovi <[email protected]> >>>> *To:* Emmanuel CHANSON <[email protected]> >>>> *Cc:* users <[email protected]> >>>> *Sent:* Thursday, December 17, 2009 9:26 AM >>>> *Subject:* Re: HTTP connection URL through Binary SMS or PPG ? >>>> >>>> The flow You explain is correct, but after You have sent it to PPG, it >>>> will take care of sending the SMS.. >>>> . >>>> So You just push the PAP message to the PPG url configured to Kannel. if >>>> You use PHP, You can use cUrl to do the communication between Your >>>> application and Kannel. >>>> >>>> Alternative solution is to build the message in Your application, it >>>> takes aprx. 10 lines of PHP code and then use the sendsms interface >>>> directly. Anyhow, I use the Kannel PPG. >>>> >>>> -- >>>> Henri >>>> >>>> On Wed, Dec 16, 2009 at 11:08 PM, Emmanuel CHANSON < >>>> [email protected]> wrote: >>>> >>>>> Thanks Henri, >>>>> >>>>> So if I understand well Wapbox is mandatory in this situation. At least >>>>> to compile the PAP xml ? then send a SMS ? >>>>> PPG can not be used alone for this task? I mean what are the necessary >>>>> steps to perform: >>>>> >>>>> HTTP Interface ? -> PPG -> Wapbox -> SMS -> Mobile Station >>>>> >>>>> I have to check how to use PPG for this purpose. I will check the >>>>> Kannel User Guide for this but basically: >>>>> Is it possible through a PHP script (or whatever) to call an HTTP >>>>> interface in order to make the PPG do this job? >>>>> >>>>> Regards, >>>>> >>>>> Emmanuel >>>>> >>>>> 2009/12/16 Henri Hovi <[email protected]> >>>>> >>>>>> You need to use PPG. The wapbox is just used to compile the PAP >>>>>> XML to "correct format", it's then forwarded as SMS to the device. >>>>>> >>>>>> >>>>>> When the phone retrieves the URL, it does it based on it's own >>>>>> configuration, so it can use HTTP directly or WAP Gateway as proxy. In >>>>>> later >>>>>> case the wapbox can be used, but requires that the user has the Kannel >>>>>> configured as proxy. But normally operators has those already >>>>>> configured, so >>>>>> You don't need to worry about them. >>>>>> >>>>>> >>>>>> -- >>>>>> Henri >>>>>> >>>>>> On Wed, Dec 16, 2009 at 6:59 AM, Emmanuel CHANSON < >>>>>> [email protected]> wrote: >>>>>> >>>>>>> Hello guys, >>>>>>> >>>>>>> I'm wondering how can I make a mobile openning an HTTP URL ? >>>>>>> >>>>>>> - by sending a SMS push with UDH parameter through sendsms interface >>>>>>> ? which value to add in this case? >>>>>>> - by using PPG from kannel ? which config in this case for PPG group? >>>>>>> - others solution ? >>>>>>> >>>>>>> I saw many times WAP PUSH tutorials that show how to send a WAP PUSH >>>>>>> SMS using PPG but do I have to do the same if I want to make a mobile >>>>>>> openning an HTTP URL ? Whatever its properties because some mobile (old >>>>>>> one) >>>>>>> have to use WAP and wapbox, the recent ones use HTTP and doesn't need >>>>>>> wapbox >>>>>>> in this case. >>>>>>> >>>>>>> -- >>>>>>> Emmanuel >>>>>>> >>>>>>> CHANSON Emmanuel >>>>>>> Mobile Nouvelle-CalΞΉdonie: +687.77.35.02 >>>>>>> >>>>>>> Mobile France: +33 (0) 6.68.03.89.56 >>>>>>> @email : [email protected] >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> Henri Hovi >>>>>> http://www.patidure.com >>>>>> http://patidure.blogspot.com >>>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> Emmanuel >>>>> >>>>> CHANSON Emmanuel >>>>> Mobile Nouvelle-CalΞΉdonie: +687.77.35.02 >>>>> >>>>> Mobile France: +33 (0) 6.68.03.89.56 >>>>> @email : [email protected] >>>>> >>>> >>>> >>>> >>>> -- >>>> Henri Hovi >>>> http://www.patidure.com >>>> http://patidure.blogspot.com >>>> >>>> >>> >>> >>> -- >>> Henri Hovi >>> http://www.patidure.com >>> http://patidure.blogspot.com >>> >>> >> >> >> -- >> Henri Hovi >> http://www.patidure.com >> http://patidure.blogspot.com >> >> > -- Emmanuel CHANSON Emmanuel Mobile Nouvelle-Calédonie: +687.77.35.02 Mobile France: +33 (0) 6.68.03.89.56 @email : [email protected]
