You need to either config your modem to send messages to kannel (CNMI
command) or configure kannel to seek for the messages sim-buffering =
true
Read the manual for details
Hope helps
Alvaro
|-----------------------------------------------------------------------------------------------------------------|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via
SMS y GPRS online
Visitenos en www.perusms.NET www.smsglobal.com.mx y
www.pravcom.com
On Tue, Jan 26, 2010 at 1:40 PM, carachi83 <[email protected]> wrote:
> Hello,
> I've this problem: I'm able to send SMSes but I'm not able to receive them.
> Why?
> In the log file of the modem and smsbox I don't see any error!
> I've read the user manual and I've searched on the net, but i didn't find
> anything!
> Can you help me?
>
> Below my log and settings file!
>
> Thank you
> Bye
>
>
> -------------------------------------------KANNEL.CONF
> ------------------------------------------------------------------
>
> include = /etc/kannel/modems.conf
>
> group = core
> admin-port = 13000
> smsbox-port = 13001
> admin-password = bar
> #status-password = foo
> #admin-deny-ip = ""
> #admin-allow-ip = ""
> log-file = "/etc/kannel/kannel.log"
> log-level = 1
> box-deny-ip = "*.*.*.*"
> box-allow-ip = "127.0.0.1"
> #unified-prefix = "+358,00358,0;+,00"
> #access-log = "/tmp/access.log"
> #store-file = "kannel.store"
> #ssl-server-cert-file = "cert.pem"
> #ssl-server-key-file = "key.pem"
> #ssl-certkey-file = "mycertandprivkeyfile.pem"
> #dlr-storage = internal
>
> #---------------------------------------------
> # SMSC CONNECTIONS
> #
> # SMSC connections are created in bearerbox and they handle SMSC specific
> # protocol and message relying. You need these to actually receive and send
> # messages to handset, but can use GSM modems as virtual SMSCs
>
>
> # This is a fake smsc connection, _only_ used to test the system and
> services.
> # It really cannot relay messages to actual handsets!
>
> group = smsc
> smsc = fake
> smsc-id = FAKE
> port = 10000
> connect-allow-ip = 127.0.0.1
>
> #---------------------------------------------
> # SMSBOX SETUP
> #
> # Smsbox(es) do higher-level SMS handling after they have been received from
> # SMS centers by bearerbox, or before they are given to bearerbox for
> delivery
>
> group = smsbox
> bearerbox-host = 127.0.0.1
> sendsms-port = 13013
> global-sender = 13013
> #sendsms-chars = "0123456789 +-"
> log-file = "/etc/kannel/smsbox.log"
> log-level = 1
> #access-log = "/tmp/access.log"
>
> #---------------------------------------------
> # SEND-SMS USERS
> #
> # These users are used when Kannel smsbox sendsms interface is used to
> # send PUSH sms messages, i.e. calling URL like
> #
> http://kannel.machine:13013/cgi-bin/sendsms?username=tester&password=foobar...
> #
> http://127.0.0.1:13013/cgi-bin/sendsms?username=tester&password=foobar&to=3921776&text=ciccio
>
> group = sendsms-user
> username = tester
> password = foobar
> #user-deny-ip = ""
> #user-allow-ip = ""
>
> #---------------------------------------------
> # SERVICES
> #
> # These are 'responses' to sms PULL messages, i.e. messages arriving from
> # handsets. The response is based on message content. Only one sms-service
> is
> # applied, using the first one to match.
>
> group = sms-service
> keyword =
> #keyword-regex = .*
> catch-all = true
> #max-messages = 10
> get-url = "http://localhost/sms?phone=%p&text=%a";
>
>
>
>
> #penna usb
> group = smsc
> smsc=at
> modemtype = auto
> #speed = 19200
> device=/dev/ttyUSB0
> #device=/dev/ttyACM0
> my-number=3453361361
> log-level=1
> log-file = "/etc/kannel/modem.log"
>
>
> -------------------------------------------MODEM.LOG
> ------------------------------------------------------------------
>
> 2010-01-26 19:11:54 [7919] [7] INFO: AT2[/dev/ttyUSB0]: opening device
> 2010-01-26 19:11:55 [7919] [7] INFO: AT2[/dev/ttyUSB0]: speed set to 115200
> 2010-01-26 19:12:09 [7919] [7] INFO: AT2[/dev/ttyUSB0]: Closing device
> 2010-01-26 19:12:09 [7919] [7] INFO: AT2[/dev/ttyUSB0]: opening device
> 2010-01-26 19:12:10 [7919] [7] INFO: AT2[/dev/ttyUSB0]: speed set to 57600
> 2010-01-26 19:12:10 [7919] [7] INFO: AT2[/dev/ttyUSB0]: Closing device
> 2010-01-26 19:12:10 [7919] [7] INFO: AT2[/dev/ttyUSB0]: detect speed is
> 57600
> 2010-01-26 19:12:10 [7919] [7] INFO: AT2[/dev/ttyUSB0]: opening device
> 2010-01-26 19:12:11 [7919] [7] INFO: AT2[/dev/ttyUSB0]: speed set to 57600
> 2010-01-26 19:12:12 [7919] [7] INFO: AT2[/dev/ttyUSB0]: Phase 2+ is
> supported
> 2010-01-26 19:12:12 [7919] [7] INFO: AT2[/dev/ttyUSB0]: Closing device
> 2010-01-26 19:12:12 [7919] [7] INFO: AT2[/dev/ttyUSB0]: opening device
> 2010-01-26 19:12:12 [7919] [7] INFO: AT2[/dev/ttyUSB0]: Logging in
> 2010-01-26 19:12:12 [7919] [7] INFO: AT2[/dev/ttyUSB0]: init device
> 2010-01-26 19:12:12 [7919] [7] INFO: AT2[/dev/ttyUSB0]: speed set to 57600
> 2010-01-26 19:12:13 [7919] [7] INFO: AT2[/dev/ttyUSB0]: Phase 2+ is
> supported
> 2010-01-26 19:12:13 [7919] [7] INFO: AT2[/dev/ttyUSB0]: AT SMSC successfully
> opened.
>
> -------------------------------------------KANNEL.LOG
> ------------------------------------------------------------------
>
> 2010-01-26 19:11:54 [7919] [0] INFO: Added logfile `/etc/kannel/kannel.log'
> with level `1'.
> 2010-01-26 19:11:54 [7919] [0] INFO: HTTP: Opening server at port 13000.
> 2010-01-26 19:11:54 [7919] [0] INFO: BOXC: 'smsbox-max-pending' not set,
> using default (100).
> 2010-01-26 19:11:54 [7919] [0] INFO: Set SMS resend frequency to 60 seconds.
> 2010-01-26 19:11:54 [7919] [0] INFO: SMS resend retry set to unlimited.
> 2010-01-26 19:11:54 [7919] [0] INFO: DLR rerouting for smsc id <FAKE>
> disabled.
> 2010-01-26 19:11:54 [7919] [0] INFO: DLR rerouting for smsc id <(null)>
> disabled.
> 2010-01-26 19:11:54 [7919] [0] INFO: Added logfile `/etc/kannel/modem.log'
> with level `1'.
> 2010-01-26 19:11:54 [7919] [0] INFO: AT2[/dev/ttyUSB0]: configuration
> doesn't show modemtype. will autodetect
> 2010-01-26 19:11:54 [7919] [7] INFO: Logging thread `7' to logfile
> `/etc/kannel/modem.log' with level `1'.
> 2010-01-26 19:11:54 [7919] [0] INFO:
> ----------------------------------------
> 2010-01-26 19:11:54 [7919] [0] INFO: Kannel bearerbox II version 1.4.3
> starting
> 2010-01-26 19:11:54 [7919] [0] INFO: MAIN: Start-up done, entering mainloop
> 2010-01-26 19:12:31 [7919] [5] INFO: Client connected from <127.0.0.1>
>
> -------------------------------------------KANNEL.LOG
> ------------------------------------------------------------------
>
> 2010-01-26 19:12:31 [7937] [0] INFO: Added logfile `/etc/kannel/smsbox.log'
> with level `1'.
> 2010-01-26 19:12:31 [7937] [0] INFO: Service global sender set as '13013'
> 2010-01-26 19:12:31 [7937] [0] INFO: HTTP: Opening server at port 13013.
> 2010-01-26 19:12:31 [7937] [0] INFO: Set up send sms service at port 13013
> 2010-01-26 19:12:31 [7937] [0] INFO: Connected to bearerbox at 127.0.0.1
> port 13001.
> 2010-01-26 19:19:04 [7937] [3] INFO: smsbox: Got HTTP request
> </cgi-bin/sendsms> from <127.0.0.1>
> 2010-01-26 19:19:04 [7937] [3] INFO: sendsms used by <tester>
> 2010-01-26 19:19:04 [7937] [3] INFO: sendsms sender:<tester:13013>
> (127.0.0.1) to:<3921776> msg:<ciccio>
> 2010-01-26 19:19:04 [7937] [3] INFO: smsbox: Got HTTP request </favicon.ico>
> from <127.0.0.1>
> 2010-01-26 19:19:07 [7937] [3] INFO: smsbox: Got HTTP request </favicon.ico>
> from <127.0.0.1>
> 2010-01-26 19:19:46 [7937] [3] INFO: smsbox: Got HTTP request
> </cgi-bin/sendsms> from <127.0.0.1>
> 2010-01-26 19:19:46 [7937] [3] INFO: sendsms used by <tester>
> 2010-01-26 19:19:46 [7937] [3] INFO: sendsms sender:<tester:13013>
> (127.0.0.1) to:<3921776> msg:<ciccio>
> 2010-01-26 19:20:14 [7937] [3] INFO: smsbox: Got HTTP request
> </cgi-bin/sendsms> from <127.0.0.1>
> 2010-01-26 19:20:14 [7937] [3] INFO: sendsms used by <tester>
> 2010-01-26 19:20:14 [7937] [3] INFO: sendsms sender:<tester:13013>
> (127.0.0.1) to:<3921776> msg:<ciccio>
> 2010-01-26 19:20:48 [7937] [3] INFO: smsbox: Got HTTP request
> </cgi-bin/sendsms> from <127.0.0.1>
> 2010-01-26 19:20:48 [7937] [3] INFO: sendsms used by <tester>
> 2010-01-26 19:20:48 [7937] [3] INFO: sendsms sender:<tester:13013>
> (127.0.0.1) to:<3921776> msg:<ciccio7>
> 2010-01-26 19:21:07 [7937] [3] INFO: smsbox: Got HTTP request
> </cgi-bin/sendsms> from <127.0.0.1>
> 2010-01-26 19:21:07 [7937] [3] INFO: sendsms used by <tester>
> 2010-01-26 19:21:07 [7937] [3] INFO: sendsms sender:<tester:13013>
> (127.0.0.1) to:<3921776> msg:<ciccio7>
>
> ----------------------------------------------------------------------------------------------------------------------------------------------------------------------
>
>
