use log-level=0 for maximum verbose
use cmee=1 or 2 to get maximum verbose from modem
repost logs
|-----------------------------------------------------------------------------------------------------------------|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via
SMS y GPRS online
Visitenos en www.perusms.NET www.smsglobal.com.mx y
www.pravcom.com
On Tue, Jan 26, 2010 at 5:24 PM, Carachi <[email protected]> wrote:
> Hello Alvaro,
>
> Thank you for your advise!
> I added sim-buffering in smsc and the init-string and now
> I receive the sms in sim memory and ONLY the first sms, after my modem give
> me this error:
>
> 01-26 23:08:45 [10931] [0] INFO: ----------------------------------------
> 2010-01-26 23:08:45 [10931] [0] INFO: Kannel bearerbox II version 1.4.3
> starting
> 2010-01-26 23:08:45 [10931] [0] INFO: MAIN: Start-up done, entering mainloop
> 2010-01-26 23:08:46 [10931] [7] INFO: AT2[/dev/ttyUSB0]: speed set to 115200
> 2010-01-26 23:08:51 [10931] [5] INFO: Client connected from <127.0.0.1>
> 2010-01-26 23:08:52 [10931] [7] INFO: AT2[/dev/ttyUSB0]: Closing device
> 2010-01-26 23:08:52 [10931] [7] INFO: AT2[/dev/ttyUSB0]: detect speed is
> 115200
> 2010-01-26 23:08:52 [10931] [7] INFO: AT2[/dev/ttyUSB0]: opening device
> 2010-01-26 23:08:53 [10931] [7] INFO: AT2[/dev/ttyUSB0]: speed set to 115200
> 2010-01-26 23:08:53 [10931] [7] INFO: AT2[/dev/ttyUSB0]: Phase 2+ is
> supported
> 2010-01-26 23:08:53 [10931] [7] INFO: AT2[/dev/ttyUSB0]: Closing device
> 2010-01-26 23:08:53 [10931] [7] INFO: AT2[/dev/ttyUSB0]: opening device
> 2010-01-26 23:08:53 [10931] [7] INFO: AT2[/dev/ttyUSB0]: Logging in
> 2010-01-26 23:08:54 [10931] [7] INFO: AT2[/dev/ttyUSB0]: init device
> 2010-01-26 23:08:54 [10931] [7] INFO: AT2[/dev/ttyUSB0]: speed set to 115200
> 2010-01-26 23:08:55 [10931] [7] INFO: AT2[/dev/ttyUSB0]: Phase 2+ is
> supported
> 2010-01-26 23:08:55 [10931] [7] INFO: AT2[/dev/ttyUSB0]: AT SMSC
> successfully opened.*
> 2010-01-26 23:10:05 [10931] [7] INFO: AT2[/dev/ttyUSB0]: Closing device
> 2010-01-26 23:10:05 [10931] [7] ERROR: AT2[/dev/ttyUSB0]: Couldn't connect
> (retrying in 10 seconds).
> 2010-01-26 23:10:15 [10931] [7] INFO: AT2[/dev/ttyUSB0]: opening device
> 2010-01-26 23:10:15 [10931] [7] INFO: AT2[/dev/ttyUSB0]: Logging in
> 2010-01-26 23:10:15 [10931] [7] INFO: AT2[/dev/ttyUSB0]: init device
> 2010-01-26 23:10:15 [10931] [7] INFO: AT2[/dev/ttyUSB0]: speed set to 115200
> 2010-01-26 23:10:19 [10931] [7] ERROR: AT2[/dev/ttyUSB0]: Wrong or no answer
> to ATZ, ignoring
> 2010-01-26 23:10:23 [10931] [7] ERROR: AT2[/dev/ttyUSB0]: Wrong or no answer
> to AT. Trying again
> 2010-01-26 23:10:27 [10931] [7] ERROR: AT2[/dev/ttyUSB0]: Second attempt to
> send AT failed
> 2010-01-26 23:10:27 [10931] [7] ERROR: AT2[/dev/ttyUSB0]: Initialization of
> device failed.
> 2010-01-26 23:10:27 [10931] [7] INFO: AT2[/dev/ttyUSB0]: Closing device*
> 2010-01-26 23:10:27 [10931] [7] ERROR: AT2[/dev/ttyUSB0]: Couldn't connect
> (retrying in 10 seconds).
> 2010-01-26 23:10:37 [10931] [7] INFO: AT2[/dev/ttyUSB0]: opening device
> 2010-01-26 23:10:37 [10931] [7] INFO: AT2[/dev/ttyUSB0]: Logging in
> 2010-01-26 23:10:37 [10931] [7] INFO: AT2[/dev/ttyUSB0]: init device
> 2010-01-26 23:10:37 [10931] [7] INFO: AT2[/dev/ttyUSB0]: speed set to 115200
>
> Why?
> How I can solve it?
>
> Thank you
> Bye
>
> My configuration files are:
>
> --------------modem.conf----------------------------------------
>
> group = modems
> id = generic
> name = "Generic Modem"
> reset-string = "AT+CFUN=1"
> keepalive-cmd = "AT"
> init-string = "AT+CNMI=1,2,0,0,0"
>
> --------------kannel.conf----------------------------------------
>
> #
> # Sample configuration file for Kannel bearerbox on Debian.
> # See the documentation for explanations of fields.
> #
>
> # HTTP administration is disabled by default. Make sure you set the
> # password if you enable it.
>
> # group = core
> # admin-port = 13000
> # admin-password = bar
> # admin-deny-ip = "*.*.*.*"
> # admin-allow-ip = ""
> # wapbox-port = 13002
> # wdp-interface-name = "*"
> # log-file = "/var/log/kannel/bearerbox.log"
> # box-deny-ip = "*.*.*.*"
> # box-allow-ip = "127.0.0.1"
>
> # group = wapbox
> # bearerbox-host = localhost
> # log-file = "/var/log/kannel/wapbox.log"
>
>
>
>
>
>
> include = /etc/kannel/modems.conf
>
> group = core
> admin-port = 13000
> smsbox-port = 13001
> admin-password = bar
> #status-password = foo
> #admin-deny-ip = "*.*.*.*"
> admin-allow-ip = ""
> log-file = "/etc/kannel/log/kannel.log"
> log-level = 1
> box-deny-ip = "*.*.*.*"
> box-allow-ip = "127.0.0.1"
> #unified-prefix = "+358,00358,0;+,00"
> #access-log = "/tmp/access.log"
> #store-file = "kannel.store"
> #ssl-server-cert-file = "cert.pem"
> #ssl-server-key-file = "key.pem"
> #ssl-certkey-file = "mycertandprivkeyfile.pem"
> #dlr-storage = internal
>
> #---------------------------------------------
> # SMSC CONNECTIONS
> #
> # SMSC connections are created in bearerbox and they handle SMSC specific
> # protocol and message relying. You need these to actually receive and send
> # messages to handset, but can use GSM modems as virtual SMSCs
>
>
> # This is a fake smsc connection, _only_ used to test the system and
> services.
> # It really cannot relay messages to actual handsets!
>
> group = smsc
> smsc = fake
> smsc-id = FAKE
> port = 10000
> connect-allow-ip = 127.0.0.1
>
> #---------------------------------------------
> # SMSBOX SETUP
> #
> # Smsbox(es) do higher-level SMS handling after they have been received from
> # SMS centers by bearerbox, or before they are given to bearerbox for
> delivery
>
> group = smsbox
> bearerbox-host = 127.0.0.1
> sendsms-port = 13013
> global-sender = 13013
> #sendsms-chars = "0123456789 +-"
> log-file = "/etc/kannel/log/smsbox.log"
> log-level = 1
> #access-log = "/tmp/access.log"
>
> #---------------------------------------------
> # SEND-SMS USERS
> #
> # These users are used when Kannel smsbox sendsms interface is used to
> # send PUSH sms messages, i.e. calling URL like
> #
> http://kannel.machine:13013/cgi-bin/sendsms?username=tester&password=foobar...
> #
> http://127.0.0.1:13013/cgi-bin/sendsms?username=tester&password=foobar&to=3921776&text=ciccio
>
> group = sendsms-user
> username = tester
> password = foobar
> #user-deny-ip = ""
> #user-allow-ip = ""
>
> #---------------------------------------------
> # SERVICES
> #
> # These are 'responses' to sms PULL messages, i.e. messages arriving from
> # handsets. The response is based on message content. Only one sms-service
> is
> # applied, using the first one to match.
>
> group = sms-service
> keyword =
> catch-all = true
> get-url = "http://localhost/sms.php?phone=%p&text=%a";
>
>
> #penna usb
> group = smsc
> smsc=at
> modemtype = auto
> device=/dev/ttyUSB0
> my-number=3453361361
> log-level=2
> sim-buffering = true
>
>
> --------------smsbox.log-----------------------------------------------------------
>
> 2010-01-26 23:08:51 [10943] [0] INFO: Debug_lvl = 1, log_file = <none>,
> log_lvl = 0
> 2010-01-26 23:08:51 [10943] [0] INFO: Starting to log to file
> /etc/kannel/log/smsbox.log level 1
> 2010-01-26 23:08:51 [10943] [0] INFO: Added logfile
> `/etc/kannel/log/smsbox.log' with level `1'.
> 2010-01-26 23:08:51 [10943] [0] INFO: Service global sender set as '13013'
> 2010-01-26 23:08:51 [10943] [0] INFO: HTTP: Opening server at port 13013.
> 2010-01-26 23:08:51 [10943] [0] INFO: Set up send sms service at port 13013
> 2010-01-26 23:08:51 [10943] [0] INFO: Connected to bearerbox at 127.0.0.1
> port 13001.
> 2010-01-26 23:08:57 [10943] [4] INFO: Starting to service <gfgf> from
> <3453361361> to <3453361361>
> 2010-01-26 23:08:58 [10943] [4] INFO: Starting to service <azz> from
> <3453361361> to <3453361361>
> 2010-01-26 23:09:57 [10943] [4] INFO: Starting to service <gggagaga fwef>
> from <3453361361> to <3453361361>
> 2010-01-26 23:10:49 [10943] [0] INFO: Bearerbox told us to die
>
>
>
>
>
>
>
>
>
>
>
>
> Alvaro Cornejo wrote:
>>
>> You need to either config your modem to send messages to kannel (CNMI
>> command) or configure kannel to seek for the messages sim-buffering =
>> true
>>
>> Read the manual for details
>>
>> Hope helps
>>
>> Alvaro
>>
>> |-----------------------------------------------------------------------------------------------------------------|
>> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
>> celular y Nextel
>> en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via
>> SMS y GPRS online
>> Visitenos en www.perusms.NET www.smsglobal.com.mx y
>> www.pravcom.com
>>
>>
>>
>> On Tue, Jan 26, 2010 at 1:40 PM, carachi83 <[email protected]> wrote:
>>
>>>
>>> Hello,
>>> I've this problem: I'm able to send SMSes but I'm not able to receive
>>> them.
>>> Why?
>>> In the log file of the modem and smsbox I don't see any error!
>>> I've read the user manual and I've searched on the net, but i didn't
>>> find
>>> anything!
>>> Can you help me?
>>>
>>> Below my log and settings file!
>>>
>>> Thank you
>>> Bye
>>>
>>>
>>> -------------------------------------------KANNEL.CONF
>>> ------------------------------------------------------------------
>>>
>>> include = /etc/kannel/modems.conf
>>>
>>> group = core
>>> admin-port = 13000
>>> smsbox-port = 13001
>>> admin-password = bar
>>> #status-password = foo
>>> #admin-deny-ip = ""
>>> #admin-allow-ip = ""
>>> log-file = "/etc/kannel/kannel.log"
>>> log-level = 1
>>> box-deny-ip = "*.*.*.*"
>>> box-allow-ip = "127.0.0.1"
>>> #unified-prefix = "+358,00358,0;+,00"
>>> #access-log = "/tmp/access.log"
>>> #store-file = "kannel.store"
>>> #ssl-server-cert-file = "cert.pem"
>>> #ssl-server-key-file = "key.pem"
>>> #ssl-certkey-file = "mycertandprivkeyfile.pem"
>>> #dlr-storage = internal
>>>
>>> #---------------------------------------------
>>> # SMSC CONNECTIONS
>>> #
>>> # SMSC connections are created in bearerbox and they handle SMSC specific
>>> # protocol and message relying. You need these to actually receive and
>>> send
>>> # messages to handset, but can use GSM modems as virtual SMSCs
>>>
>>>
>>> # This is a fake smsc connection, _only_ used to test the system and
>>> services.
>>> # It really cannot relay messages to actual handsets!
>>>
>>> group = smsc
>>> smsc = fake
>>> smsc-id = FAKE
>>> port = 10000
>>> connect-allow-ip = 127.0.0.1
>>>
>>> #---------------------------------------------
>>> # SMSBOX SETUP
>>> #
>>> # Smsbox(es) do higher-level SMS handling after they have been received
>>> from
>>> # SMS centers by bearerbox, or before they are given to bearerbox for
>>> delivery
>>>
>>> group = smsbox
>>> bearerbox-host = 127.0.0.1
>>> sendsms-port = 13013
>>> global-sender = 13013
>>> #sendsms-chars = "0123456789 +-"
>>> log-file = "/etc/kannel/smsbox.log"
>>> log-level = 1
>>> #access-log = "/tmp/access.log"
>>>
>>> #---------------------------------------------
>>> # SEND-SMS USERS
>>> #
>>> # These users are used when Kannel smsbox sendsms interface is used to
>>> # send PUSH sms messages, i.e. calling URL like
>>> #
>>>
>>> http://kannel.machine:13013/cgi-bin/sendsms?username=tester&password=foobar...
>>> #
>>>
>>> http://127.0.0.1:13013/cgi-bin/sendsms?username=tester&password=foobar&to=3921776&text=ciccio
>>>
>>> group = sendsms-user
>>> username = tester
>>> password = foobar
>>> #user-deny-ip = ""
>>> #user-allow-ip = ""
>>>
>>> #---------------------------------------------
>>> # SERVICES
>>> #
>>> # These are 'responses' to sms PULL messages, i.e. messages arriving from
>>> # handsets. The response is based on message content. Only one
>>> sms-service
>>> is
>>> # applied, using the first one to match.
>>>
>>> group = sms-service
>>> keyword =
>>> #keyword-regex = .*
>>> catch-all = true
>>> #max-messages = 10
>>> get-url = "http://localhost/sms?phone=%p&text=%a";
>>>
>>>
>>>
>>>
>>> #penna usb
>>> group = smsc
>>> smsc=at
>>> modemtype = auto
>>> #speed = 19200
>>> device=/dev/ttyUSB0
>>> #device=/dev/ttyACM0
>>> my-number=3453361361
>>> log-level=1
>>> log-file = "/etc/kannel/modem.log"
>>>
>>>
>>> -------------------------------------------MODEM.LOG
>>> ------------------------------------------------------------------
>>>
>>> 2010-01-26 19:11:54 [7919] [7] INFO: AT2[/dev/ttyUSB0]: opening device
>>> 2010-01-26 19:11:55 [7919] [7] INFO: AT2[/dev/ttyUSB0]: speed set to
>>> 115200
>>> 2010-01-26 19:12:09 [7919] [7] INFO: AT2[/dev/ttyUSB0]: Closing device
>>> 2010-01-26 19:12:09 [7919] [7] INFO: AT2[/dev/ttyUSB0]: opening device
>>> 2010-01-26 19:12:10 [7919] [7] INFO: AT2[/dev/ttyUSB0]: speed set to
>>> 57600
>>> 2010-01-26 19:12:10 [7919] [7] INFO: AT2[/dev/ttyUSB0]: Closing device
>>> 2010-01-26 19:12:10 [7919] [7] INFO: AT2[/dev/ttyUSB0]: detect speed is
>>> 57600
>>> 2010-01-26 19:12:10 [7919] [7] INFO: AT2[/dev/ttyUSB0]: opening device
>>> 2010-01-26 19:12:11 [7919] [7] INFO: AT2[/dev/ttyUSB0]: speed set to
>>> 57600
>>> 2010-01-26 19:12:12 [7919] [7] INFO: AT2[/dev/ttyUSB0]: Phase 2+ is
>>> supported
>>> 2010-01-26 19:12:12 [7919] [7] INFO: AT2[/dev/ttyUSB0]: Closing device
>>> 2010-01-26 19:12:12 [7919] [7] INFO: AT2[/dev/ttyUSB0]: opening device
>>> 2010-01-26 19:12:12 [7919] [7] INFO: AT2[/dev/ttyUSB0]: Logging in
>>> 2010-01-26 19:12:12 [7919] [7] INFO: AT2[/dev/ttyUSB0]: init device
>>> 2010-01-26 19:12:12 [7919] [7] INFO: AT2[/dev/ttyUSB0]: speed set to
>>> 57600
>>> 2010-01-26 19:12:13 [7919] [7] INFO: AT2[/dev/ttyUSB0]: Phase 2+ is
>>> supported
>>> 2010-01-26 19:12:13 [7919] [7] INFO: AT2[/dev/ttyUSB0]: AT SMSC
>>> successfully
>>> opened.
>>>
>>> -------------------------------------------KANNEL.LOG
>>> ------------------------------------------------------------------
>>>
>>> 2010-01-26 19:11:54 [7919] [0] INFO: Added logfile
>>> `/etc/kannel/kannel.log'
>>> with level `1'.
>>> 2010-01-26 19:11:54 [7919] [0] INFO: HTTP: Opening server at port 13000.
>>> 2010-01-26 19:11:54 [7919] [0] INFO: BOXC: 'smsbox-max-pending' not set,
>>> using default (100).
>>> 2010-01-26 19:11:54 [7919] [0] INFO: Set SMS resend frequency to 60
>>> seconds.
>>> 2010-01-26 19:11:54 [7919] [0] INFO: SMS resend retry set to unlimited.
>>> 2010-01-26 19:11:54 [7919] [0] INFO: DLR rerouting for smsc id <FAKE>
>>> disabled.
>>> 2010-01-26 19:11:54 [7919] [0] INFO: DLR rerouting for smsc id <(null)>
>>> disabled.
>>> 2010-01-26 19:11:54 [7919] [0] INFO: Added logfile
>>> `/etc/kannel/modem.log'
>>> with level `1'.
>>> 2010-01-26 19:11:54 [7919] [0] INFO: AT2[/dev/ttyUSB0]: configuration
>>> doesn't show modemtype. will autodetect
>>> 2010-01-26 19:11:54 [7919] [7] INFO: Logging thread `7' to logfile
>>> `/etc/kannel/modem.log' with level `1'.
>>> 2010-01-26 19:11:54 [7919] [0] INFO:
>>> ----------------------------------------
>>> 2010-01-26 19:11:54 [7919] [0] INFO: Kannel bearerbox II version 1.4.3
>>> starting
>>> 2010-01-26 19:11:54 [7919] [0] INFO: MAIN: Start-up done, entering
>>> mainloop
>>> 2010-01-26 19:12:31 [7919] [5] INFO: Client connected from <127.0.0.1>
>>>
>>> -------------------------------------------KANNEL.LOG
>>> ------------------------------------------------------------------
>>>
>>> 2010-01-26 19:12:31 [7937] [0] INFO: Added logfile
>>> `/etc/kannel/smsbox.log'
>>> with level `1'.
>>> 2010-01-26 19:12:31 [7937] [0] INFO: Service global sender set as '13013'
>>> 2010-01-26 19:12:31 [7937] [0] INFO: HTTP: Opening server at port 13013.
>>> 2010-01-26 19:12:31 [7937] [0] INFO: Set up send sms service at port
>>> 13013
>>> 2010-01-26 19:12:31 [7937] [0] INFO: Connected to bearerbox at 127.0.0.1
>>> port 13001.
>>> 2010-01-26 19:19:04 [7937] [3] INFO: smsbox: Got HTTP request
>>> </cgi-bin/sendsms> from <127.0.0.1>
>>> 2010-01-26 19:19:04 [7937] [3] INFO: sendsms used by <tester>
>>> 2010-01-26 19:19:04 [7937] [3] INFO: sendsms sender:<tester:13013>
>>> (127.0.0.1) to:<3921776> msg:<ciccio>
>>> 2010-01-26 19:19:04 [7937] [3] INFO: smsbox: Got HTTP request
>>> </favicon.ico>
>>> from <127.0.0.1>
>>> 2010-01-26 19:19:07 [7937] [3] INFO: smsbox: Got HTTP request
>>> </favicon.ico>
>>> from <127.0.0.1>
>>> 2010-01-26 19:19:46 [7937] [3] INFO: smsbox: Got HTTP request
>>> </cgi-bin/sendsms> from <127.0.0.1>
>>> 2010-01-26 19:19:46 [7937] [3] INFO: sendsms used by <tester>
>>> 2010-01-26 19:19:46 [7937] [3] INFO: sendsms sender:<tester:13013>
>>> (127.0.0.1) to:<3921776> msg:<ciccio>
>>> 2010-01-26 19:20:14 [7937] [3] INFO: smsbox: Got HTTP request
>>> </cgi-bin/sendsms> from <127.0.0.1>
>>> 2010-01-26 19:20:14 [7937] [3] INFO: sendsms used by <tester>
>>> 2010-01-26 19:20:14 [7937] [3] INFO: sendsms sender:<tester:13013>
>>> (127.0.0.1) to:<3921776> msg:<ciccio>
>>> 2010-01-26 19:20:48 [7937] [3] INFO: smsbox: Got HTTP request
>>> </cgi-bin/sendsms> from <127.0.0.1>
>>> 2010-01-26 19:20:48 [7937] [3] INFO: sendsms used by <tester>
>>> 2010-01-26 19:20:48 [7937] [3] INFO: sendsms sender:<tester:13013>
>>> (127.0.0.1) to:<3921776> msg:<ciccio7>
>>> 2010-01-26 19:21:07 [7937] [3] INFO: smsbox: Got HTTP request
>>> </cgi-bin/sendsms> from <127.0.0.1>
>>> 2010-01-26 19:21:07 [7937] [3] INFO: sendsms used by <tester>
>>> 2010-01-26 19:21:07 [7937] [3] INFO: sendsms sender:<tester:13013>
>>> (127.0.0.1) to:<3921776> msg:<ciccio7>
>>>
>>>
>>> ----------------------------------------------------------------------------------------------------------------------------------------------------------------------
>>>
>>>
>>>
>
>
>
