Hi ... am new to Kannel and the board. Looking to setup a sms gateway using a multitech mtcba-c-n2 over Sprint CDMA. am running on the latest release of Debian, 32bit.
am able to communicate to the modem and send text messages via putty communicating through the serial port (ttyS0). when bearerbox starts, it sees the modem, sends the init string no problem (set to auto - it picks it up as a wavecom) but spits out an error when bearerbox pushes an AT+CMGF=0^M, then restarts the sequence. the multitech AT command reference DOES NOT have this command listed and manually trying it in putty spits out an error too - my modem does not accept this it seems! before this I was having a problem with the +CPIN command till I set the no-pin = true in modems.conf. being CDMA, I do not have a pin. I'm wondering: 1. if Kannel is compatible with AT CDMA modems and mine in particular? 2. what file do I need to edit to customize the AT commands Kannel sends to my modem? (if possible) thanks a bunch ~Rich -- Mailing Lists <[email protected]>
