Allways address the list. You might get better/faster support
It is on sources
in your gateway folder: gw/smsc/smsc_at.*
Regards
|-----------------------------------------------------------------------------------------------------------------|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via SMS y
GPRS online
Visitenos en www.perusms.NET www.smsglobal.com.mx y
www.pravcom.com
On Thu, Jul 22, 2010 at 8:39 PM, Mailing Lists <
[email protected]> wrote:
> on a standard install using default diretories, where does that file
> reside? have looked - cannot find it ... thanks ~Rich
>
>
>
>
> On Thu, 22 Jul 2010 08:43:50 -0500
> Alvaro Cornejo <[email protected]> wrote:
>
> > Hi
> >
> > Kannel works with GSM modems not CDMA, however you can patch kannel and
> do a
> > driver with specific CDMA commads. take a look at smsc_at.c it is the GSM
> > modem driver
> >
> > Regards
> >
> > Alvaro
> >
> |-----------------------------------------------------------------------------------------------------------------|
> > Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
> > celular y Nextel
> > en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via
> SMS y
> > GPRS online
> > Visitenos en www.perusms.NET www.smsglobal.com.mx y
> > www.pravcom.com
> >
> >
> > 2010/7/22 Nikos Balkanas <[email protected]>
> >
> > > Hi,
> > >
> > > Best starting point would be to read the User's Guide from the site. It
> has
> > > a section dedicated to modem initialization. If after trying it out you
> > > still have specific questions, please address this list and post
> maximum
> > > detail relevant logs + configuration.
> > >
> > > In the meantime using a serial communication program like minicom, type
> the
> > > following commands to the modem:
> > >
> > > AT+CMGF=?
> > > AT+CMGF?
> > >
> > > And post output.
> > >
> > > BR,
> > > Nikos
> > > ----- Original Message ----- From: "Mailing Lists" <
> > > [email protected]>
> > > To: <[email protected]>
> > > Sent: Thursday, July 22, 2010 5:11 AM
> > > Subject: kannel 1.4.3 -> multitech mtcba-c-n2, serial -> sprint cdma
> > > ...modem error trying to open
> > >
> > >
> > >
> > >
> > >> Hi ... am new to Kannel and the board. Looking to setup a sms gateway
> > >> using a multitech mtcba-c-n2 over Sprint CDMA. am running on the
> latest
> > >> release of Debian, 32bit.
> > >>
> > >> am able to communicate to the modem and send text messages via putty
> > >> communicating through the serial port (ttyS0).
> > >>
> > >> when bearerbox starts, it sees the modem, sends the init string no
> problem
> > >> (set to auto - it picks it up as a wavecom) but spits out an error
> when
> > >> bearerbox pushes an AT+CMGF=0^M, then restarts the sequence. the
> multitech
> > >> AT command reference DOES NOT have this command listed and manually
> trying
> > >> it in putty spits out an error too - my modem does not accept this it
> seems!
> > >>
> > >> before this I was having a problem with the +CPIN command till I set
> the
> > >> no-pin = true in modems.conf. being CDMA, I do not have a pin.
> > >>
> > >> I'm wondering:
> > >> 1. if Kannel is compatible with AT CDMA modems and mine in particular?
> > >> 2. what file do I need to edit to customize the AT commands Kannel
> sends
> > >> to my modem? (if possible)
> > >>
> > >> thanks a bunch ~Rich
> > >>
> > >> --
> > >> Mailing Lists <[email protected]>
> > >>
> > >>
> > >
> > >
>
>
> --
> Mailing Lists <[email protected]>
>
