A similar problem happens with sqlbox if you don't set the "sms_type" to "2" when submitting mt's: everything works fine until you restart the service, and then when bearerbox tries to restore the queue from the store it fails with those errors.
I don't know if opensmppbox is leaving the sms type empty, if is this a bug or misconfiguration (I've no experience with opensmppbox so far myself) but perhaps the sqlbox issue points you on the right direction? Regards, Alex On Mon, Aug 9, 2010 at 7:14 PM, Tomasz <ad...@impexrur.pl> wrote: > Hi, > > Open SMPPBOX haven't its own queue - I submit messages to Bearerbox > via open SMPPBOX from other system. But sometimes these messages are > being queued by Bearerbox in spool. > > But when Bearerbox is restarted while at spool there are some messages, it > PANICs and won't run. > > The problem is because messages at spool haven't Type field. They have > SMS ID, Time, Sender, Receiver, SMSC ID, BOX ID, UDH, Message fields > but Type field is empty. > > Bearerbox during start informs about it: > > 2010-08-09 17:49:55 [29887] [0] PANIC: Not handled sms_type within store! > > I didn't tried submitting messages to BEARERBOX from a standard SMSBOX > yet, only by open SMPPBOX so I don't know at the moment if this > problem happens only when using open SMPPBOX. > > @Nikos Sorry for adressing you private, it was my mistake. > > Tomasz > > > Please address list. > > > I didn't know that opensmppbox has now a queue. Clearly you shouldn't > have > > overlapping spools between bb and openssmppbox. Configure different spool > > areas for each one. > > > BR, > > Nikos > > ----- Original Message ----- > > From: "Tomasz" <ad...@impexrur.pl> > > To: "Nikos Balkanas" <nbalka...@gmail.com> > > Sent: Monday, August 09, 2010 7:55 PM > > Subject: Re: Problem with spool store - missing sms_type > > > > Hi, > > > Yes, I know that they are corrupted, but all msgs in spool are always > > corrupted :) I removed them, but all new messages queued at spool are > > corrupted. > > > They are probably incorrectly saved by Bearerbox/openSMPPBOX. > > > The problem starts when I want to restart Bearerbox - it displays > > PANICs and won't start until I remove spool manually. It causes that I > > can't restart Bearerbox if there is some queue in spool... > > > Tomasz > > > > W Twoim liœcie datowanym 9 sierpnia 2010 (18:34:44) moΏna przeczytaζ: > > >> Hi, > > >> You have a corrupted SMS in your spool. Remove it and you will be fine. > > >> BR, > >> Nikos > >> ----- Original Message ----- > >> From: "Tomasz" <ad...@impexrur.pl> > >> To: <users@kannel.org> > >> Sent: Monday, August 09, 2010 7:30 PM > >> Subject: Problem with spool store - missing sms_type > > > >> Hi, > > >> Today I've found some critical error with kannel spool store-type. > >> When I have messages in a queue (spool) and restart Bearerbox I get > >> Panic: > > >> 2010-08-09 17:49:55 [29887] [0] PANIC: Not handled sms_type within > store! > >> 2010-08-09 17:49:55 [29887] [0] PANIC: > >> /usr/local/sbin/bearerbox(gw_panic+0x14b) [0x487f5b] > >> 2010-08-09 17:49:55 [29887] [0] PANIC: /usr/local/sbin/bearerbox > >> [0x419721] > >> 2010-08-09 17:49:55 [29887] [0] PANIC: /usr/local/sbin/bearerbox > >> [0x419144] > >> 2010-08-09 17:49:55 [29887] [0] PANIC: /usr/local/sbin/bearerbox > >> [0x419166] > >> 2010-08-09 17:49:55 [29887] [0] PANIC: /usr/local/sbin/bearerbox > >> [0x419689] > >> 2010-08-09 17:49:55 [29887] [0] PANIC: > >> /usr/local/sbin/bearerbox(main+0x80f) > >> [0x40f22f] > >> 2010-08-09 17:49:55 [29887] [0] PANIC: > >> /lib/libc.so.6(__libc_start_main+0xe6) [0x7f5cdfd3b1a6] > >> 2010-08-09 17:49:55 [29887] [0] PANIC: /usr/local/sbin/bearerbox > >> [0x40db09] > > >> When I checked store-status (via http admin) I could see that "Type" > field > >> of all messages was empty. All messages were submitted to Bearerbox > >> via open SMPPBOX. > > >> My Kannel version is from latest SVN (Rev. 4837). > > >> Tomasz > > >