Nope. The average between various servers that have been tested are
approximately the ones cited. Standard deviation between optimized
servers/OS is not that large (+/-50). This includes various
conditions/architectures, each one with each own results. I just posted the
most common ones. No optimized filesystem was used anywhere (spool, ext3 on
linux, ufs on Solaris). Tests are very reproducible and discriminating with
respect to DB, and possibly filesystem used for storage (not tested yet).
If in doubt run your own tests.
Nikos
----- Original Message -----
From: "Juan Nin" <[email protected]>
To: <[email protected]>
Sent: Saturday, August 14, 2010 8:23 AM
Subject: Re: Kannel profermance
So you're saying that on any server and/or architecture the results
will be the same?
Doesn't seem very reasonable...
2010/8/14 Nikos Balkanas <[email protected]>:
Actually you have missed a couple of more emails. On fakesmpp submission
I
also posted results from a low-end Solaris 10 64bit box. Very similar to
the
results posted from the linux server. The averages seem pretty solid. So,
contrary to your beliefs, it is not giving out the wrong impression.
BR,
Nikos
----- Original Message ----- From: "Juan Nin" <[email protected]>
To: <[email protected]>
Sent: Saturday, August 14, 2010 4:33 AM
Subject: Re: Kannel profermance
Ok, just saw on another thread where you got those values from, but
again, that's very system specific.
I guess you point was just to say that Kannel was not the issue for
his bottleneck, but saying "It can handle ~1000 MO/s, 750 MT/s
(internal DLRs) or 450 MT/s (DB DLRs)" may give the wrong impression
that that's the maximum it can handle, or that it can always handle
that load, while on low end servers it may not.
So saying something like that in that way can confuse new users, IMHO.
On Fri, Aug 13, 2010 at 10:26 PM, Juan Nin <[email protected]> wrote:
2010/8/13 Nikos Balkanas <[email protected]>:
It is unlikely that kannel is your bottleneck. It can handle ~1000
MO/s,
750
MT/s (internal DLRs) or 450 MT/s (DB DLRs).
Just curious to know where do you get those values from...
What Kannel supports depends on your hardware and architecture
--
Juan Nin
3Cinteractive / Mobilizing Great Brands
http://www.3cinteractive.com
--
Juan Nin
3Cinteractive / Mobilizing Great Brands
http://www.3cinteractive.com
