You should: - stop kannel - use minicom to connect to your modem and use the following command AT+CMGD described here ( http://www.developershome.com/sms/cmgdCommand.asp ) to delete SMS
*Here is another example. Suppose you want to delete all SMS messages stored in the message storage area. To do this, assign 4 to the flags parameter of the +CMGD AT command. The value assigned to the index parameter does not matter since it will be ignored by the GSM/GPRS modem or mobile phone. AT+CMGD=1,4 OK *- restart Kannel with message-start=0 in modems.conf on the huawei section Emmanuel 2010/9/22 Zaharia Constantin <soulra...@muscel.ro> > no change, and when i add the message-start = 0, kannel is not starting, > whay? > if ai add the init string like in you config, the log is verry quiet, but > i don't know how to read the message from sim, when is recived. What is > you metod to read the recived message? > > > > Do you still have SMS stored in modem storage ? you should see it in > > bearerbox.log: > > * > > 2010-09-22 21:00:09 [1629] [20] DEBUG: AT2[huawei_e220]: --> AT+CPMS?^M > > 2010-09-22 21:00:09 [1629] [20] DEBUG: AT2[huawei_e220]: <-- +CPMS: > > "ME",0,255,"SM",0,60,"SM",0,60 > > 2010-09-22 21:00:09 [1629] [20] DEBUG: AT2[huawei_e220]: <-- OK > > 2010-09-22 21:00:13 [1629] [20] DEBUG: AT2[huawei_e220]: <-- > > ^BOOT:92407792,0,0,0,6* > > > > For instance you may have sthg like +CPMS: > > "ME",*1,255*,"SM",0,60,"SM",0,60 > > > > Stop Kannel, try to check this and delete it using minicom with AT+CMGD > > command: > > some help: http://www.developershome.com/sms/cmgdCommand.asp > > > > Then start Kannel > > > > my config in modems.conf > > > > group = modems > > id = huawei_e220 > > name = "Huawei E220" > > detect-string = "huawei" > > #init-string = "AT S7=45 S0=0 L1 V1 X4 &c1 E1 Q0" > > #init-string = "ATQ0 V1 E1 S0=0 &D2 +FCLASS=0" > > init-string = "AT+CNMI=2,1,2,2,0" > > message-storage = me > > speed = 460800 > > message-start = 0 > > > > I had the same issue but disappeared after deleting SMS in modem storage > > then restarting Kannel. > > > > Regards, > > > > Emmanuel > > > > 2010/9/22 Zaharia Constantin <soulra...@muscel.ro> > > > >> yes, is in /dev/ttyUSB1. > >> i have read the link above, but i don't know how to make this changes, > >> or > >> how to update the kannel using ubuntu. > >> > >> > >> > Which /dev do you use to attache the modem ? /dev/ttyUSB1 ? > >> > > >> > read this > >> > > >> > http://kerneltrap.org/node/17017 > >> > > >> > Regards > >> > > >> > Emmanuel > >> > > >> > 2010/9/22 Zaharia Constantin <soulra...@muscel.ro> > >> > > >> >> hy, so, the config file is in atachment. > >> >> i use a Huawei e160e(E220) on ubuntu. The problem with that is that i > >> >> can't read the message from this modem, i get this error in log > >> files: > >> >> > >> >> 2010-09-21 16:04:41 [3780] [6] DEBUG: AT2[huawei_E160e]: not deleted. > >> >> 2010-09-21 16:04:41 [3780] [6] DEBUG: AT2[huawei_E160e]: --> > >> >> AT+CMGR=44^M > >> >> 2010-09-21 16:04:41 [3780] [6] DEBUG: AT2[huawei_E160e]: <-- > >> AT+CMGR=44 > >> >> 2010-09-21 16:04:41 [3780] [6] DEBUG: AT2[huawei_E160e]: <-- OK > >> >> 2010-09-21 16:04:41 [3780] [6] DEBUG: AT2[huawei_E160e]: not deleted. > >> >> 2010-09-21 16:04:41 [3780] [6] DEBUG: AT2[huawei_E160e]: --> > >> >> AT+CMGR=45^M > >> >> 2010-09-21 16:04:41 [3780] [6] DEBUG: AT2[huawei_E160e]: <-- > >> AT+CMGR=45 > >> >> 2010-09-21 16:04:41 [3780] [6] DEBUG: AT2[huawei_E160e]: <-- OK > >> >> 2010-09-21 16:04:41 [3780] [6] DEBUG: AT2[huawei_E160e]: not deleted. > >> >> 2010-09-21 16:04:41 [3780] [6] DEBUG: AT2[huawei_E160e]: --> > >> >> AT+CMGR=46^M > >> >> 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: <-- > >> AT+CMGR=46 > >> >> 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: <-- OK > >> >> 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: not deleted. > >> >> 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: --> > >> >> AT+CMGR=47^M > >> >> 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: <-- > >> AT+CMGR=47 > >> >> 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: <-- OK > >> >> 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: not deleted. > >> >> 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: --> > >> >> AT+CMGR=48^M > >> >> 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: <-- > >> AT+CMGR=48 > >> >> 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: <-- OK > >> >> 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: not deleted. > >> >> 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: --> > >> >> AT+CMGR=49^M > >> >> 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: <-- > >> AT+CMGR=49 > >> >> 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: <-- OK > >> >> 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: not deleted. > >> >> 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: --> > >> >> AT+CMGR=50^M > >> >> 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: <-- > >> AT+CMGR=50 > >> >> 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: <-- +CMS > >> ERROR: > >> >> 321 > >> >> 2010-09-21 16:04:42 [3780] [6] ERROR: AT2[huawei_E160e]: CMS ERROR: > >> +CMS > >> >> ERROR: 321 > >> >> 2010-09-21 16:04:42 [3780] [6] ERROR: AT2[huawei_E160e]: CMS ERROR: > >> >> Invalid memory index -> don't worry, just memory fragmentation. (321) > >> >> 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: failed to > >> get > >> >> message 50. > >> >> > >> >> and i can't get rid of this error. > >> >> after that i will need to concentrate on the script to get the > >> message > >> >> from SIM card and the messages that i have send from kannel. > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> > Hi Zaharia > >> >> > This <http://www.mail-archive.com/users@kannel.org/msg20081.html> > >> site > >> >> > should be able to solve your problem. However I suggest that you > >> post > >> >> your > >> >> > whole configuration file(you can mask the sensitve data like > >> >> passwords, > >> >> > ips > >> >> > etc) so that we have a loook. Plus if you install new programes > >> after > >> >> > kannel > >> >> > has been compiled i think it can not use them so i suggest that you > >> >> > recompile Kannel. What make is your modem? Huawei? > >> >> > Lastly this <http://www.ddj.co.za/kannel-for-windows> site has got > >> a > >> >> nice > >> >> > and easy installer of kannel. > >> >> > I hope this helps. > >> >> > > >> >> > > >> >> > 2010/9/21 Zaharia Constantin <soulra...@muscel.ro> > >> >> > > >> >> >> is not working with "message-start = 0" > >> >> >> what i have to do, to read the sms from sim card? > >> >> >> is any problem in init string?or something else? > >> >> >> i have a USB modem E160e(E220) > >> >> >> > >> >> >> > >> >> >> > Hi, > >> >> >> > > >> >> >> > Try to add: > >> >> >> > > >> >> >> > message-start = 0 > >> >> >> > > >> >> >> > to your "group = modems" section > >> >> >> > > >> >> >> > BR, > >> >> >> > Tomasz > >> >> >> > > >> >> >> > W Twoim liście datowanym 20 września 2010 (14:56:44) można > >> >> przeczytać: > >> >> >> > > >> >> >> >> i have restart the machine, but nothing, the seam error...what > >> is > >> >> >> wrong? > >> >> >> > > >> >> >> >> offtopic: > >> >> >> >> and the sqlbox, when i starting "sqlbox > >> /etc/kannel/sqlbox.config" > >> >> >> > > >> >> >> >> segmentation fault > >> >> >> > > >> >> >> >> whay:( > >> >> >> > > >> >> >> >> Constantin Zaharia > >> >> >> > > >> >> >> > > >> >> >> >>> try restarting your machine > >> >> >> >>> > >> >> >> >>> 2010/9/20 Zaharia Constantin <soulra...@muscel.ro> > >> >> >> >>> > >> >> >> >>>> How i setup the sqlbox? i have installed using apt-get, but > >> now > >> >> i > >> >> >> >>>> don't > >> >> >> >>>> know what i have to do... > >> >> >> >>>> is necessary to start some application? > >> >> >> >>>> > >> >> >> >>>> and now i get another error, regarding the read of sms from > >> sim > >> >> >> >>>> > >> >> >> >>>> 2010-09-14 23:51:37 [10621] [6] DEBUG: AT2[huawei_E160e]: <-- > >> OK > >> >> >> >>>> 2010-09-14 23:51:37 [10621] [6] DEBUG: AT2[huawei_E160e]: not > >> >> >> deleted. > >> >> >> >>>> 2010-09-14 23:51:37 [10621] [6] DEBUG: AT2[huawei_E160e]: --> > >> >> >> >>>> AT+CMGR=43^M > >> >> >> >>>> 2010-09-14 23:51:37 [10621] [6] DEBUG: AT2[huawei_E160e]: <-- > >> >> >> >>>> AT+CMGR=43 > >> >> >> >>>> 2010-09-14 23:51:37 [10621] [6] DEBUG: AT2[huawei_E160e]: <-- > >> OK > >> >> >> >>>> 2010-09-14 23:51:37 [10621] [6] DEBUG: AT2[huawei_E160e]: not > >> >> >> deleted. > >> >> >> >>>> 2010-09-14 23:51:37 [10621] [6] DEBUG: AT2[huawei_E160e]: --> > >> >> >> >>>> AT+CMGR=44^M > >> >> >> >>>> 2010-09-14 23:51:37 [10621] [6] DEBUG: AT2[huawei_E160e]: <-- > >> >> >> >>>> AT+CMGR=44 > >> >> >> >>>> 2010-09-14 23:51:37 [10621] [6] DEBUG: AT2[huawei_E160e]: <-- > >> OK > >> >> >> >>>> 2010-09-14 23:51:37 [10621] [6] DEBUG: AT2[huawei_E160e]: not > >> >> >> deleted. > >> >> >> >>>> 2010-09-14 23:51:37 [10621] [6] DEBUG: AT2[huawei_E160e]: --> > >> >> >> >>>> AT+CMGR=45^M > >> >> >> >>>> 2010-09-14 23:51:37 [10621] [6] DEBUG: AT2[huawei_E160e]: <-- > >> >> >> >>>> AT+CMGR=45 > >> >> >> >>>> 2010-09-14 23:51:37 [10621] [6] DEBUG: AT2[huawei_E160e]: <-- > >> OK > >> >> >> >>>> 2010-09-14 23:51:37 [10621] [6] DEBUG: AT2[huawei_E160e]: not > >> >> >> deleted. > >> >> >> >>>> 2010-09-14 23:51:37 [10621] [6] DEBUG: AT2[huawei_E160e]: --> > >> >> >> >>>> AT+CMGR=46^M > >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: <-- > >> >> >> >>>> AT+CMGR=46 > >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: <-- > >> OK > >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: not > >> >> >> deleted. > >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: --> > >> >> >> >>>> AT+CMGR=47^M > >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: <-- > >> >> >> >>>> AT+CMGR=47 > >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: <-- > >> OK > >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: not > >> >> >> deleted. > >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: --> > >> >> >> >>>> AT+CMGR=48^M > >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: <-- > >> >> >> >>>> AT+CMGR=48 > >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: <-- > >> OK > >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: not > >> >> >> deleted. > >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: --> > >> >> >> >>>> AT+CMGR=49^M > >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: <-- > >> >> >> >>>> AT+CMGR=49 > >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: <-- > >> OK > >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: not > >> >> >> deleted. > >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: --> > >> >> >> >>>> AT+CMGR=50^M > >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: <-- > >> >> >> >>>> AT+CMGR=50 > >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: <-- > >> >> +CMS > >> >> >> >>>> ERROR: > >> >> >> >>>> 321 > >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] ERROR: AT2[huawei_E160e]: CMS > >> >> >> ERROR: > >> >> >> >>>> +CMS > >> >> >> >>>> ERROR: 321 > >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] ERROR: AT2[huawei_E160e]: CMS > >> >> >> ERROR: > >> >> >> >>>> Invalid memory index -> don't worry, just memory > >> fragmentation. > >> >> >> (321) > >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: > >> failed > >> >> to > >> >> >> >>>> get > >> >> >> >>>> message 50. > >> >> >> >>>> > >> >> >> >>>> > >> >> >> >>>> what is wrong ? > >> >> >> >>>> > >> >> >> >>>> > >> >> >> >>>> > >> >> >> >>>> > >> >> >> >>>> > Here is my answer to the exact same question from a few > >> months > >> >> >> ago: > >> >> >> >>>> > > >> >> >> >>>> > http://www.mail-archive.com/users@kannel.org/msg20081.html > >> >> >> >>>> > > >> >> >> >>>> > > >> >> >> >>>> > 2010/9/17 Zaharia Constantin <soulra...@muscel.ro> > >> >> >> >>>> > > >> >> >> >>>> >> hy, > >> >> >> >>>> >> how i read the message from SIM card and how i store the > >> >> >> messages. > >> >> >> >>>> >> I want to see when a new message has arrived and store in > >> a > >> >> >> >>>> database. > >> >> >> >>>> >> > >> >> >> >>>> >> please help me... > >> >> >> >>>> >> > >> >> >> >>>> >> best regards, > >> >> >> >>>> >> Constantin Zaharia > >> >> >> >>>> >> > >> >> >> >>>> >> > >> >> >> >>>> >> > >> >> >> >>>> >> > >> >> >> >>>> >> > >> >> >> >>>> > > >> >> >> >>>> > > >> >> >> >>>> > -- > >> >> >> >>>> > Best regards, > >> >> >> >>>> > Alex > >> >> >> >>>> > > >> >> >> >>>> > >> >> >> >>>> > >> >> >> >>>> > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> -- > >> >> >> >>> Best regards, > >> >> >> >>> Alex > >> >> >> >>> > >> >> >> > > >> >> >> > > >> >> >> > >> >> >> > >> >> >> > >> >> >> > >> >> > > >> >> > > >> >> > -- > >> >> > Best regards, > >> >> > Alex > >> >> > > >> >> > >> > > >> > >> > >> > > > > >
