if i start kannel with message-start=0, stop responding, no info in log files. nothning.
> You should: > > - stop kannel > - use minicom to connect to your modem and use the following command AT+CMGD > described here ( http://www.developershome.com/sms/cmgdCommand.asp ) to delete SMS > > *Here is another example. Suppose you want to delete all SMS messages stored > in the message storage area. > To do this, assign 4 to the flags parameter of the +CMGD AT command. The value assigned to the index parameter does not matter since it will be ignored by the GSM/GPRS modem or mobile phone. > AT+CMGD=1,4 > OK > > *- restart Kannel with message-start=0 in modems.conf on the huawei section > > Emmanuel > > 2010/9/22 Zaharia Constantin <soulra...@muscel.ro> > >> no change, and when i add the message-start = 0, kannel is not starting, whay? >> if ai add the init string like in you config, the log is verry quiet, but >> i don't know how to read the message from sim, when is recived. What is you metod to read the recived message? >> >> >> > Do you still have SMS stored in modem storage ? you should see it in bearerbox.log: >> > * >> > 2010-09-22 21:00:09 [1629] [20] DEBUG: AT2[huawei_e220]: --> >> AT+CPMS?^M >> > 2010-09-22 21:00:09 [1629] [20] DEBUG: AT2[huawei_e220]: <-- +CPMS: "ME",0,255,"SM",0,60,"SM",0,60 >> > 2010-09-22 21:00:09 [1629] [20] DEBUG: AT2[huawei_e220]: <-- OK 2010-09-22 21:00:13 [1629] [20] DEBUG: AT2[huawei_e220]: <-- >> > ^BOOT:92407792,0,0,0,6* >> > >> > For instance you may have sthg like +CPMS: >> > "ME",*1,255*,"SM",0,60,"SM",0,60 >> > >> > Stop Kannel, try to check this and delete it using minicom with >> AT+CMGD >> > command: >> > some help: http://www.developershome.com/sms/cmgdCommand.asp >> > >> > Then start Kannel >> > >> > my config in modems.conf >> > >> > group = modems >> > id = huawei_e220 >> > name = "Huawei E220" >> > detect-string = "huawei" >> > #init-string = "AT S7=45 S0=0 L1 V1 X4 &c1 E1 Q0" >> > #init-string = "ATQ0 V1 E1 S0=0 &D2 +FCLASS=0" >> > init-string = "AT+CNMI=2,1,2,2,0" >> > message-storage = me >> > speed = 460800 >> > message-start = 0 >> > >> > I had the same issue but disappeared after deleting SMS in modem >> storage >> > then restarting Kannel. >> > >> > Regards, >> > >> > Emmanuel >> > >> > 2010/9/22 Zaharia Constantin <soulra...@muscel.ro> >> > >> >> yes, is in /dev/ttyUSB1. >> >> i have read the link above, but i don't know how to make this >> changes, >> >> or >> >> how to update the kannel using ubuntu. >> >> >> >> >> >> > Which /dev do you use to attache the modem ? /dev/ttyUSB1 ? >> >> > >> >> > read this >> >> > >> >> > http://kerneltrap.org/node/17017 >> >> > >> >> > Regards >> >> > >> >> > Emmanuel >> >> > >> >> > 2010/9/22 Zaharia Constantin <soulra...@muscel.ro> >> >> > >> >> >> hy, so, the config file is in atachment. >> >> >> i use a Huawei e160e(E220) on ubuntu. The problem with that is >> that i >> >> >> can't read the message from this modem, i get this error in log >> >> files: >> >> >> >> >> >> 2010-09-21 16:04:41 [3780] [6] DEBUG: AT2[huawei_E160e]: not >> deleted. >> >> >> 2010-09-21 16:04:41 [3780] [6] DEBUG: AT2[huawei_E160e]: --> AT+CMGR=44^M >> >> >> 2010-09-21 16:04:41 [3780] [6] DEBUG: AT2[huawei_E160e]: <-- >> >> AT+CMGR=44 >> >> >> 2010-09-21 16:04:41 [3780] [6] DEBUG: AT2[huawei_E160e]: <-- OK 2010-09-21 16:04:41 [3780] [6] DEBUG: AT2[huawei_E160e]: not >> deleted. >> >> >> 2010-09-21 16:04:41 [3780] [6] DEBUG: AT2[huawei_E160e]: --> AT+CMGR=45^M >> >> >> 2010-09-21 16:04:41 [3780] [6] DEBUG: AT2[huawei_E160e]: <-- >> >> AT+CMGR=45 >> >> >> 2010-09-21 16:04:41 [3780] [6] DEBUG: AT2[huawei_E160e]: <-- OK 2010-09-21 16:04:41 [3780] [6] DEBUG: AT2[huawei_E160e]: not >> deleted. >> >> >> 2010-09-21 16:04:41 [3780] [6] DEBUG: AT2[huawei_E160e]: --> AT+CMGR=46^M >> >> >> 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: <-- >> >> AT+CMGR=46 >> >> >> 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: <-- OK 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: not >> deleted. >> >> >> 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: --> AT+CMGR=47^M >> >> >> 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: <-- >> >> AT+CMGR=47 >> >> >> 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: <-- OK 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: not >> deleted. >> >> >> 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: --> AT+CMGR=48^M >> >> >> 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: <-- >> >> AT+CMGR=48 >> >> >> 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: <-- OK 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: not >> deleted. >> >> >> 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: --> AT+CMGR=49^M >> >> >> 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: <-- >> >> AT+CMGR=49 >> >> >> 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: <-- OK 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: not >> deleted. >> >> >> 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: --> AT+CMGR=50^M >> >> >> 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: <-- >> >> AT+CMGR=50 >> >> >> 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: <-- +CMS >> >> ERROR: >> >> >> 321 >> >> >> 2010-09-21 16:04:42 [3780] [6] ERROR: AT2[huawei_E160e]: CMS >> ERROR: >> >> +CMS >> >> >> ERROR: 321 >> >> >> 2010-09-21 16:04:42 [3780] [6] ERROR: AT2[huawei_E160e]: CMS >> ERROR: >> >> >> Invalid memory index -> don't worry, just memory fragmentation. >> (321) >> >> >> 2010-09-21 16:04:42 [3780] [6] DEBUG: AT2[huawei_E160e]: failed to >> >> get >> >> >> message 50. >> >> >> >> >> >> and i can't get rid of this error. >> >> >> after that i will need to concentrate on the script to get the >> >> message >> >> >> from SIM card and the messages that i have send from kannel. >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> > Hi Zaharia >> >> >> > This >> <http://www.mail-archive.com/users@kannel.org/msg20081.html> >> >> site >> >> >> > should be able to solve your problem. However I suggest that you >> >> post >> >> >> your >> >> >> > whole configuration file(you can mask the sensitve data like >> >> >> passwords, >> >> >> > ips >> >> >> > etc) so that we have a loook. Plus if you install new programes >> >> after >> >> >> > kannel >> >> >> > has been compiled i think it can not use them so i suggest that >> you >> >> >> > recompile Kannel. What make is your modem? Huawei? >> >> >> > Lastly this <http://www.ddj.co.za/kannel-for-windows> site has >> got >> >> a >> >> >> nice >> >> >> > and easy installer of kannel. >> >> >> > I hope this helps. >> >> >> > >> >> >> > >> >> >> > 2010/9/21 Zaharia Constantin <soulra...@muscel.ro> >> >> >> > >> >> >> >> is not working with "message-start = 0" >> >> >> >> what i have to do, to read the sms from sim card? >> >> >> >> is any problem in init string?or something else? >> >> >> >> i have a USB modem E160e(E220) >> >> >> >> >> >> >> >> >> >> >> >> > Hi, >> >> >> >> > >> >> >> >> > Try to add: >> >> >> >> > >> >> >> >> > message-start = 0 >> >> >> >> > >> >> >> >> > to your "group = modems" section >> >> >> >> > >> >> >> >> > BR, >> >> >> >> > Tomasz >> >> >> >> > >> >> >> >> > W Twoim liście datowanym 20 września 2010 (14:56:44) można >> >> >> przeczytać: >> >> >> >> > >> >> >> >> >> i have restart the machine, but nothing, the seam >> error...what >> >> is >> >> >> >> wrong? >> >> >> >> > >> >> >> >> >> offtopic: >> >> >> >> >> and the sqlbox, when i starting "sqlbox >> >> /etc/kannel/sqlbox.config" >> >> >> >> > >> >> >> >> >> segmentation fault >> >> >> >> > >> >> >> >> >> whay:( >> >> >> >> > >> >> >> >> >> Constantin Zaharia >> >> >> >> > >> >> >> >> > >> >> >> >> >>> try restarting your machine >> >> >> >> >>> >> >> >> >> >>> 2010/9/20 Zaharia Constantin <soulra...@muscel.ro> >> >> >> >> >>> >> >> >> >> >>>> How i setup the sqlbox? i have installed using apt-get, >> but >> >> now >> >> >> i >> >> >> >> >>>> don't >> >> >> >> >>>> know what i have to do... >> >> >> >> >>>> is necessary to start some application? >> >> >> >> >>>> >> >> >> >> >>>> and now i get another error, regarding the read of sms >> from >> >> sim >> >> >> >> >>>> >> >> >> >> >>>> 2010-09-14 23:51:37 [10621] [6] DEBUG: AT2[huawei_E160e]: >> <-- >> >> OK >> >> >> >> >>>> 2010-09-14 23:51:37 [10621] [6] DEBUG: AT2[huawei_E160e]: >> not >> >> >> >> deleted. >> >> >> >> >>>> 2010-09-14 23:51:37 [10621] [6] DEBUG: AT2[huawei_E160e]: >> --> >> >> >> >> >>>> AT+CMGR=43^M >> >> >> >> >>>> 2010-09-14 23:51:37 [10621] [6] DEBUG: AT2[huawei_E160e]: >> <-- >> >> >> >> >>>> AT+CMGR=43 >> >> >> >> >>>> 2010-09-14 23:51:37 [10621] [6] DEBUG: AT2[huawei_E160e]: >> <-- >> >> OK >> >> >> >> >>>> 2010-09-14 23:51:37 [10621] [6] DEBUG: AT2[huawei_E160e]: >> not >> >> >> >> deleted. >> >> >> >> >>>> 2010-09-14 23:51:37 [10621] [6] DEBUG: AT2[huawei_E160e]: >> --> >> >> >> >> >>>> AT+CMGR=44^M >> >> >> >> >>>> 2010-09-14 23:51:37 [10621] [6] DEBUG: AT2[huawei_E160e]: >> <-- >> >> >> >> >>>> AT+CMGR=44 >> >> >> >> >>>> 2010-09-14 23:51:37 [10621] [6] DEBUG: AT2[huawei_E160e]: >> <-- >> >> OK >> >> >> >> >>>> 2010-09-14 23:51:37 [10621] [6] DEBUG: AT2[huawei_E160e]: >> not >> >> >> >> deleted. >> >> >> >> >>>> 2010-09-14 23:51:37 [10621] [6] DEBUG: AT2[huawei_E160e]: >> --> >> >> >> >> >>>> AT+CMGR=45^M >> >> >> >> >>>> 2010-09-14 23:51:37 [10621] [6] DEBUG: AT2[huawei_E160e]: >> <-- >> >> >> >> >>>> AT+CMGR=45 >> >> >> >> >>>> 2010-09-14 23:51:37 [10621] [6] DEBUG: AT2[huawei_E160e]: >> <-- >> >> OK >> >> >> >> >>>> 2010-09-14 23:51:37 [10621] [6] DEBUG: AT2[huawei_E160e]: >> not >> >> >> >> deleted. >> >> >> >> >>>> 2010-09-14 23:51:37 [10621] [6] DEBUG: AT2[huawei_E160e]: >> --> >> >> >> >> >>>> AT+CMGR=46^M >> >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: >> <-- >> >> >> >> >>>> AT+CMGR=46 >> >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: >> <-- >> >> OK >> >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: >> not >> >> >> >> deleted. >> >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: >> --> >> >> >> >> >>>> AT+CMGR=47^M >> >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: >> <-- >> >> >> >> >>>> AT+CMGR=47 >> >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: >> <-- >> >> OK >> >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: >> not >> >> >> >> deleted. >> >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: >> --> >> >> >> >> >>>> AT+CMGR=48^M >> >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: >> <-- >> >> >> >> >>>> AT+CMGR=48 >> >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: >> <-- >> >> OK >> >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: >> not >> >> >> >> deleted. >> >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: >> --> >> >> >> >> >>>> AT+CMGR=49^M >> >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: >> <-- >> >> >> >> >>>> AT+CMGR=49 >> >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: >> <-- >> >> OK >> >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: >> not >> >> >> >> deleted. >> >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: >> --> >> >> >> >> >>>> AT+CMGR=50^M >> >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: >> <-- >> >> >> >> >>>> AT+CMGR=50 >> >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: >> <-- >> >> >> +CMS >> >> >> >> >>>> ERROR: >> >> >> >> >>>> 321 >> >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] ERROR: AT2[huawei_E160e]: >> CMS >> >> >> >> ERROR: >> >> >> >> >>>> +CMS >> >> >> >> >>>> ERROR: 321 >> >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] ERROR: AT2[huawei_E160e]: >> CMS >> >> >> >> ERROR: >> >> >> >> >>>> Invalid memory index -> don't worry, just memory >> >> fragmentation. >> >> >> >> (321) >> >> >> >> >>>> 2010-09-14 23:51:38 [10621] [6] DEBUG: AT2[huawei_E160e]: >> >> failed >> >> >> to >> >> >> >> >>>> get >> >> >> >> >>>> message 50. >> >> >> >> >>>> >> >> >> >> >>>> >> >> >> >> >>>> what is wrong ? >> >> >> >> >>>> >> >> >> >> >>>> >> >> >> >> >>>> >> >> >> >> >>>> >> >> >> >> >>>> > Here is my answer to the exact same question from a few >> >> months >> >> >> >> ago: >> >> >> >> >>>> > >> >> >> >> >>>> > http://www.mail-archive.com/users@kannel.org/msg20081.html >> >> >> >> >>>> > >> >> >> >> >>>> > >> >> >> >> >>>> > 2010/9/17 Zaharia Constantin <soulra...@muscel.ro> >> >> >> >> >>>> > >> >> >> >> >>>> >> hy, >> >> >> >> >>>> >> how i read the message from SIM card and how i store >> the >> >> >> >> messages. >> >> >> >> >>>> >> I want to see when a new message has arrived and store >> in >> >> a >> >> >> >> >>>> database. >> >> >> >> >>>> >> >> >> >> >> >>>> >> please help me... >> >> >> >> >>>> >> >> >> >> >> >>>> >> best regards, >> >> >> >> >>>> >> Constantin Zaharia >> >> >> >> >>>> >> >> >> >> >> >>>> >> >> >> >> >> >>>> >> >> >> >> >> >>>> >> >> >> >> >> >>>> >> >> >> >> >> >>>> > >> >> >> >> >>>> > >> >> >> >> >>>> > -- >> >> >> >> >>>> > Best regards, >> >> >> >> >>>> > Alex >> >> >> >> >>>> > >> >> >> >> >>>> >> >> >> >> >>>> >> >> >> >> >>>> >> >> >> >> >>> >> >> >> >> >>> >> >> >> >> >>> -- >> >> >> >> >>> Best regards, >> >> >> >> >>> Alex >> >> >> >> >>> >> >> >> >> > >> >> >> >> > >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> > >> >> >> > >> >> >> > -- >> >> >> > Best regards, >> >> >> > Alex >> >> >> > >> >> >> >> >> > >> >> >> >> >> >> >> > >> >> >> >