Hi Some nokía phones does not support cnmi command.
Try connecting from a terminal window with a communication sw like cu or minicom. send CNMI? or AT+CNMI=? to see what it did respond. If you do get an errror, command is not supported; therefore just remove from config. BTW CNMI command allows your phone to forward the MOs to kannel for future process by your app. Regards Alvaro |-----------------------------------------------------------------------------------------------------------------| Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier celular y Nextel en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via SMS y GPRS online Visitenos en www.perusms.NET www.smsglobal.com.mx y www.pravcom.com On Fri, Jan 7, 2011 at 8:39 AM, ABOUDOU B. Loukmane <[email protected]> wrote: > Le 31/12/2010 20:03, Mfawa Alfred Onen a écrit : > > Ok also are you sure of the port the Nokia 6300 gets mounted on? I used a > Nokia 6300 Before and mine was port "/dev/ttyACM0 or /dev/ttyACM1". Try and > run "dmesg" on your system to trace where the system mounted your Nokia. Of > course I assume you are using a USB cable. > > On Fri, Dec 31, 2010 at 12:54 PM, ABOUDOU B. Loukmane <[email protected]> > wrote: >> >> Le 31/12/2010 11:33, Mfawa Alfred Onen a écrit : >>> >>> Make sure kannel can read the device location. Try issuing "chmod 777 >>> /dev/ttyS0" and restart kannel. >>> >>> On 12/31/10, ABOUDOU B. Loukmane<[email protected]> wrote: >>>> >>>> Hi everybody, >>>> >>>> I have some troubles to send an sms through kannel. >>>> Here is my bearerbox.log: >>>> >>>> 2010-12-31 08:44:31 [12099] [8] ERROR: AT2[/dev/ttyS0]: open failed! >>>> ERRNO=13 >>>> 2010-12-31 08:44:31 [12099] [8] ERROR: System error 13: Permission >>>> denied >>>> 2010-12-31 08:44:31 [12099] [8] ERROR: AT2[/dev/ttyS0]: >>>> at2_device_thread: open_at2_device failed. Terminating >>>> 2010-12-31 08:44:31 [12099] [8] ERROR: System error 13: Permission >>>> denied >>>> 2010-12-31 08:44:31 [12099] [8] INFO: AT2[/dev/ttyS0]: opening device >>>> 2010-12-31 08:44:31 [12099] [8] ERROR: AT2[/dev/ttyS0]: open failed! >>>> ERRNO=13 >>>> 2010-12-31 08:44:31 [12099] [8] ERROR: System error 13: Permission >>>> denied >>>> 2010-12-31 08:44:31 [12099] [8] ERROR: AT2[/dev/ttyS0]: >>>> at2_device_thread: open_at2_device failed. Terminating >>>> 2010-12-31 08:44:31 [12099] [8] ERROR: System error 13: Permission >>>> denied >>>> 2010-12-31 08:44:31 [12099] [8] INFO: AT2[/dev/ttyS0]: opening device >>>> 2010-12-31 08:44:31 [12099] [8] ERROR: AT2[/dev/ttyS0]: open failed! >>>> ERRNO=13 >>>> 2010-12-31 08:44:31 [12099] [8] ERROR: System error 13: Permission >>>> denied >>>> 2010-12-31 08:44:31 [12099] [8] ERROR: AT2[/dev/ttyS0]: >>>> at2_device_thread: open_at2_device failed. Terminating >>>> 2010-12-31 08:44:31 [12099] [8] ERROR: System error 13: Permission >>>> denied >>>> 2010-12-31 08:44:31 [12099] [8] INFO: AT2[/dev/ttyS0]: opening device >>>> 2010-12-31 08:44:31 [12099] [8] ERROR: AT2[/dev/ttyS0]: open failed! >>>> ERRNO=13 >>>> 2010-12-31 08:44:31 [12099] [8] ERROR: System error 13: Permission >>>> denied >>>> 2010-12-31 08:44:31 [12099] [8] ERROR: AT2[/dev/ttyS0]: >>>> at2_device_thread: open_at2_device failed. Terminating >>>> 2010-12-31 08:44:31 [12099] [8] ERROR: System error 13: Permission >>>> denied >>>> 2010-12-31 08:44:31 [12099] [8] INFO: AT2[/dev/ttyS0]: opening device >>>> 2010-12-31 08:44:31 [12099] [8] ERROR: AT2[/dev/ttyS0]: open failed! >>>> ERRNO=13 >>>> 2010-12-31 08:44:31 [12099] [8] ERROR: System error 13: Permission >>>> denied >>>> 2010-12-31 08:44:31 [12099] [8] ERROR: AT2[/dev/ttyS0]: >>>> at2_device_thread: open_at2_device failed. Terminating >>>> 2010-12-31 08:44:31 [12099] [8] ERROR: System error 13: Permission >>>> denied >>>> 2010-12-31 08:44:31 [12099] [8] INFO: AT2[/dev/ttyS0]: opening device >>>> 2010-12-31 08:44:31 [12099] [8] ERROR: AT2[/dev/ttyS0]: open failed! >>>> ERRNO=13 >>>> 2010-12-31 08:44:31 [12099] [8] ERROR: System error 13: Permission >>>> denied >>>> 2010-12-31 08:44:31 [12099] [8] ERROR: AT2[/dev/ttyS0]: >>>> at2_device_thread: open_at2_device failed. Terminating >>>> 2010-12-31 08:44:31 [12099] [8] ERROR: System error 13: Permission >>>> denied >>>> 2010-12-31 08:44:31 [12099] [8] INFO: AT2[/dev/ttyS0]: opening device >>>> 2010-12-31 08:44:31 [12099] [8] ERROR: AT2[/dev/ttyS0]: open failed! >>>> ERRNO=13 >>>> 2010-12-31 08:44:31 [12099] [8] ERROR: System error 13: Permission >>>> denied >>>> 2010-12-31 08:44:31 [12099] [8] ERROR: AT2[/dev/ttyS0]: >>>> at2_device_thread: open_at2_device failed. Terminating >>>> 2010-12-31 08:44:31 [12099] [8] ERROR: System error 13: Permission >>>> denied >>>> 2010-12-31 08:44:31 [12099] [8] INFO: AT2[/dev/ttyS0]: opening device >>>> 2010-12-31 08:44:31 [12099] [8] ERROR: AT2[/dev/ttyS0]: open failed! >>>> ERRNO=13 >>>> 2010-12-31 08:44:31 [12099] [8] ERROR: System error 13: Permission >>>> denied >>>> 2010-12-31 08:44:31 [12099] [8] ERROR: AT2[/dev/ttyS0]: >>>> at2_device_thread: open_at2_device failed. Terminating >>>> 2010-12-31 08:44:31 [12099] [8] ERROR: System error 13: Permission >>>> denied >>>> 2010-12-31 08:44:31 [12099] [8] INFO: AT2[/dev/ttyS0]: opening device >>>> 2010-12-31 08:44:31 [12099] [8] ERROR: AT2[/dev/ttyS0]: open failed! >>>> ERRNO=13 >>>> 2010-12-31 08:44:31 [12099] [8] ERROR: System error 13: Permission >>>> denied >>>> 2010-12-31 08:44:31 [12099] [8] ERROR: AT2[/dev/ttyS0]: >>>> at2_device_thread: open_at2_device failed. Terminating >>>> 2010-12-31 08:44:31 [12099] [8] ERROR: System error 13: Permission >>>> denied >>>> 2010-12-31 08:44:31 [12099] [8] INFO: AT2[/dev/ttyS0]: opening device >>>> 2010-12-31 08:44:31 [12099] [0] INFO: >>>> ---------------------------------------- >>>> 2010-12-31 08:44:31 [12099] [0] INFO: Kannel bearerbox II version 1.4.1 >>>> starting >>>> 2010-12-31 08:44:31 [12099] [0] INFO: Loading store file >>>> `/etc/kannel/kannel.store' >>>> 2010-12-31 08:44:31 [12099] [0] INFO: Store-file size 0, starting to >>>> unpack >>>> 2010-12-31 08:44:31 [12099] [0] INFO: Retrieved 0 messages, >>>> non-acknowledged messages: 0 >>>> 2010-12-31 08:44:31 [12099] [0] ERROR: Failed to open >>>> '/etc/kannel/kannel.store.new' for writing, cannot create store-file >>>> 2010-12-31 08:44:31 [12099] [0] ERROR: System error 13: Permission >>>> denied >>>> 2010-12-31 08:44:31 [12099] [0] PANIC: Cannot start with store-file >>>> failing >>>> 2010-12-31 08:44:31 [12099] [0] PANIC: >>>> /usr/sbin/bearerbox(gw_panic+0x101) [0x80c60f1] >>>> 2010-12-31 08:44:31 [12099] [0] PANIC: /usr/sbin/bearerbox(main+0xc44) >>>> [0x8053714] >>>> 2010-12-31 08:44:31 [12099] [0] PANIC: >>>> /lib/i686/cmov/libc.so.6(__libc_start_main+0xe5) [0xb70f8455] >>>> 2010-12-31 08:44:31 [12099] [0] PANIC: /usr/sbin/bearerbox [0x8051d31] >>>> >>>> >>>> my kannel.conf : >>>> >>>> >>>> group = core >>>> admin-port = 13000 >>>> admin-password = bar >>>> #status-password = foo >>>> admin-deny-ip = "*.*.*.*" >>>> admin-allow-ip = "127.0.0.1;192.168.9.*" >>>> log-file = "/var/log/kannel/kannel.log" >>>> log-level = 1 >>>> access-log = "/var/log/kannel/access.log" >>>> #http-proxy-host = "127.0.0.1" >>>> #http-proxy-port = 8080 >>>> #http-proxy-exceptions = "127.0.0.1" >>>> #http-proxy-username = "user" >>>> #http-proxy-password = "password" >>>> #ssl-certkey-file = "mycertandprivkeyfile.pem" >>>> # Smsbox related >>>> smsbox-port = 13013 >>>> box-deny-ip = "*.*.*.*" >>>> box-allow-ip = "127.0.0.1;192.168.9.*" >>>> unified-prefix = "00241,00358,0" >>>> white-list = "http://127.0.0.1/white-list.txt"; >>>> black-list = "http://127.0.0.1/black-list.txt"; >>>> store-file = "/etc/kannel/kannel.store" >>>> # Wapbox related >>>> #wapbox-port = 13002 >>>> #udp-deny-ip = "*.*.*.*" >>>> #udp-allow-ip = "127.0.0.1" >>>> #wdp-interface-name = "*" >>>> >>>> >>>> # SMSC CONNECTIONS - GLOBAL FIELDS >>>> #group = smsc >>>> #smsc = >>>> #smsc-id = ID >>>> #denied-smsc-id = "X;Y" >>>> #allowed-smsc-id = "Z" >>>> #preferred-smsc-id = "W" >>>> #allowed-prefix = "040;050" >>>> #denied-prefix = "060;070" >>>> #alt-charset = >>>> >>>> >>>> # SMSC Nokia CIMD2 >>>> #group = smsc >>>> #smsc = cimd2 >>>> #host = >>>> #port = >>>> #smsc-username = >>>> #smsc-password = >>>> #keepalive = >>>> #sender-prefix = >>>> >>>> >>>> # SMSC EMI >>>> #group = smsc >>>> #smsc = emi2 >>>> #smsc = emi_ip to use the old implementation >>>> #host = >>>> #port = >>>> #smsc-username = >>>> #smsc-password = >>>> #device = /dev/ >>>> #phone = >>>> #our-port = >>>> #receive-port = >>>> #connect-allow-ip = >>>> #keepalive = >>>> #flow-control = >>>> >>>> >>>> # SMSC SMPP >>>> #group = smsc >>>> #smsc = smpp >>>> #host = >>>> #port = >>>> #receive-port = >>>> #smsc-username = >>>> #smsc-password = >>>> #system-type = >>>> #address-range = >>>> >>>> >>>> # SMSC SEMA >>>> #group = smsc >>>> #smsc = sema >>>> #device = /dev/tty0 >>>> #smsc_nua = (X121 smsc address) >>>> #home_nua = (x121 radio pad address) >>>> #wait_report = 0/1 (0 means false, 1 means true) >>>> >>>> >>>> # SMSC OIS >>>> #group = smsc >>>> #smsc = ois >>>> #host = 103.102.101.100 >>>> #port = 10000 >>>> #receive-port = 10000 >>>> #ois-debug-level = 0 >>>> >>>> >>>> # SMSC GSM >>>> group = smsc >>>> smsc = at >>>> device = /dev/ttyS0 >>>> modemtype = nokia_6300 >>>> my-number = 07002033 >>>> speed = 115200 >>>> #pin = 2345 >>>> #validityperiod = 167 >>>> include = /etc/kannel/modems.conf >>>> >>>> # SMSC Fake >>>> #group = smsc >>>> #smsc = fake >>>> #host = >>>> #port = >>>> #connect-allow-ip = >>>> >>>> >>>> # SMSC HTTP >>>> #group = smsc >>>> #smsc = http >>>> #system-type = kannel >>>> #send-url = >>>> #port = >>>> #connect-allow-ip = >>>> #username = >>>> #password = >>>> >>>> >>>> # SMSBOX SETUP >>>> >>>> group = smsbox >>>> bearerbox-host = localhost >>>> sendsms-port = 13014 >>>> global-sender = 13014 >>>> sendsms-chars = "0123456789 +-" >>>> log-file = "/var/log/kannel/smsbox.log" >>>> log-level = 0 >>>> #access-log = "access.log" >>>> #white-list = >>>> #black-list = >>>> #reply-couldnotfetch = >>>> #reply-couldnotrepresent = >>>> #reply-requestfailed = >>>> #reply-emptymessage = >>>> >>>> >>>> # SEND-SMS USERS >>>> >>>> group = sendsms-user >>>> username = nyrvan >>>> password = 007 >>>> #user-deny-ip = "" >>>> user-allow-ip = "127.0.0.1;192.168.9.*" >>>> >>>> # this sender is for Kannel relay testing (http_smsc) >>>> >>>> #group = sendsms-user >>>> #username = kannel >>>> #password = rL4y >>>> #user-deny-ip = "*.*.*.*" >>>> #user-allow-ip = "127.0.0.1" >>>> #name = service_kannel >>>> #forced-smsc = ID >>>> #default-smsc = ID >>>> #faked-sended = >>>> #max-messages = 1 >>>> #concatenation = 1 >>>> #split-chars = >>>> #split-suffix = >>>> #omit-empty = >>>> #header = >>>> #footer = >>>> #allowed-prefix = >>>> #denied-prefix = >>>> #white-list = >>>> #black-list = >>>> >>>> >>>> >>>> # SMS SERVICES >>>> >>>> #group = sms-service >>>> #name = nothing >>>> #keyword = nop >>>> #aliases = "noppy;niente" >>>> #text = "You asked nothing and I did it!" >>>> #get-url = "http://"; >>>> #post-url = "http://"; >>>> #file = "/tmp/" >>>> #accepted-smsc = ID >>>> #allowed-prefix = >>>> #denied-prefix = >>>> #catch-all = false >>>> #send-sender = false >>>> #strip-keyword = false >>>> #faked-sender = >>>> #max-messages = 1 >>>> #accept-x-kannel-headers = false >>>> #assume-plain-text = false >>>> #concatenation = false >>>> #split-chars = >>>> #split-suffix = "+" >>>> #omit-empty = true >>>> #header = >>>> #footer = >>>> #prefix = >>>> #suffix = >>>> #white-list = >>>> #black-list = >>>> >>>> >>>> # SMS SERVICE GET-URL EXAMPLE >>>> #group = sms-service >>>> #keyword = relay >>>> #get-url = >>>> "http://localhost/service?phone=%p&text=%r&binary=%b&smsc=$i&time=%t >>>> >>>> >>>> # SMS SERVICE black-list >>>> #group = sms-service >>>> #keyword = black-list >>>> #text = "You are not alowed to use this service, Go away!" >>>> >>>> >>>> # SMS SERVICE Default >>>> # there should be default always >>>> group = sms-service >>>> keyword = default >>>> text = "No service specified" >>>> >>>> my modem.conf : >>>> >>>> group = modems >>>> id = nokia_6300 >>>> name = "Nokia" >>>> detect-string = "Nokia" >>>> detect-string2 = "RM-217" >>>> need-sleep = true >>>> enable-mms = true >>>> speed = 115200 >>>> no-pin = true >>>> >>>> Could someone help me ? >>>> >>>> Thank you. >>>> >>>> Regards >>>> >>>> >>>> >>> >> Thank you M. Mfawa Alfred Onen for your answer. >> I Chmod on 777 /dev/ttyS0 but no changes . >> > > > > -- > Mfawa Alfred Onen > M.Sc Telecoms, B.Eng Elect/Elect, CCNA, RHCE(in view) > System Administrator > Department of Computer Science, > Bingham University. > > E-Mail: [email protected] > Phone1: +234 805 944 3154 > Phone2: +234 803 079 6088 > > > Thank you Mfawa Alfred Onen, the right port was /dev/ttyACM0. > But i have an other problem. > Here is my kannel.log: > > xxxxxxxxxx:/home/nyrvan# /usr/local/sbin/bearerbox /etc/kannel/kannel.conf > 2011-01-07 13:53:20 [11514] [0] INFO: Debug_lvl = -1, log_file = <none>, > log_lvl = 0 > 2011-01-07 13:53:20 [11514] [0] DEBUG: Loading include file > `/etc/kannel/modems.conf' (on line 118 of file /etc/kannel/kannel.conf). > 2011-01-07 13:53:20 [11514] [0] WARNING: DLR: using default 'internal' for > storage type. > 2011-01-07 13:53:20 [11514] [0] INFO: DLR using storage type: internal > 2011-01-07 13:53:20 [11514] [0] DEBUG: Kannel bearerbox version `'. > Build `Jan 6 2011 18:01:30', compiler `4.3.2'. > System Linux, release 2.6.26-2-686, version #1 SMP Thu Aug 19 03:44:10 UTC > 2010, machine i686. > Hostname xxxxxxxxxx.xxxxxx.xxx, IP xxx.xxx.xxx.xxx. > Libxml version 2.6.32. > Using native malloc. > > 2011-01-07 13:53:20 [11514] [0] INFO: Added logfile > `/var/log/kannel/kannel.log' with level `1'. > 2011-01-07 13:53:20 [11514] [0] INFO: Started access logfile > `/var/log/kannel/access.log'. > 2011-01-07 13:53:20 [11514] [0] WARNING: 'store-file' option deprecated, > please use 'store-location' and 'store-type' instead. > 2011-01-07 13:53:20 [11514] [0] INFO: SSL not supported, no SSL > initialization done. > 2011-01-07 13:53:20 [11514] [0] INFO: HTTP: Opening server at port 13000. > 2011-01-07 13:53:20 [11514] [0] DEBUG: Started thread 1 > (gwlib/fdset.c:poller) > 2011-01-07 13:53:20 [11514] [0] DEBUG: Started thread 2 > (gwlib/http.c:server_thread) > 2011-01-07 13:53:20 [11514] [0] DEBUG: Started thread 3 > (gw/bb_http.c:httpadmin_run) > 2011-01-07 13:53:20 [11514] [0] DEBUG: starting smsbox connection module > 2011-01-07 13:53:20 [11514] [0] INFO: BOXC: 'smsbox-max-pending' not set, > using default (100). > 2011-01-07 13:53:20 [11514] [0] DEBUG: Started thread 4 > (gw/bb_boxc.c:sms_to_smsboxes) > 2011-01-07 13:53:20 [11514] [0] DEBUG: Started thread 5 > (gw/bb_boxc.c:smsboxc_run) > 2011-01-07 13:53:20 [11514] [0] INFO: Set SMS resend frequency to 60 > seconds. > 2011-01-07 13:53:20 [11514] [0] INFO: SMS resend retry set to unlimited. > 2011-01-07 13:53:20 [11514] [0] DEBUG: smsbox MO concatenated message > handling enabled > 2011-01-07 13:53:20 [11514] [0] INFO: DLR rerouting for smsc id <(null)> > disabled. > 2011-01-07 13:53:20 [11514] [0] INFO: AT2[/dev/ttyACM0]: configuration shows > modemtype <nokia_6300> > 2011-01-07 13:53:20 [11514] [0] DEBUG: AT2[/dev/ttyACM0]: Reading modem > definitions from </etc/kannel/kannel.conf> > 2011-01-07 13:53:20 [11514] [0] DEBUG: Loading include file > `/etc/kannel/modems.conf' (on line 118 of file /etc/kannel/kannel.conf). > 2011-01-07 13:53:20 [11514] [0] DEBUG: AT2[/dev/ttyACM0]: Found <12> modems > in config > 2011-01-07 13:53:20 [11514] [0] INFO: AT2[/dev/ttyACM0]: read modem > definition for <Nokia> > 2011-01-07 13:53:20 [11514] [4] DEBUG: Thread 4 > (gw/bb_boxc.c:sms_to_smsboxes) maps to pid 11514. > 2011-01-07 13:53:20 [11514] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller) maps > to pid 11514. > 2011-01-07 13:53:20 [11514] [5] DEBUG: Thread 5 (gw/bb_boxc.c:smsboxc_run) > maps to pid 11514. > 2011-01-07 13:53:20 [11514] [3] DEBUG: Thread 3 (gw/bb_http.c:httpadmin_run) > maps to pid 11514. > 2011-01-07 13:53:20 [11514] [6] DEBUG: Thread 6 > (gw/smsc/smsc_at.c:at2_device_thread) maps to pid 11514. > 2011-01-07 13:53:20 [11514] [6] INFO: AT2[/dev/ttyACM0]: opening device > 2011-01-07 13:53:20 [11514] [2] DEBUG: Thread 2 (gwlib/http.c:server_thread) > maps to pid 11514. > 2011-01-07 13:53:20 [11514] [0] DEBUG: Started thread 6 > (gw/smsc/smsc_at.c:at2_device_thread) > 2011-01-07 13:53:20 [11514] [0] DEBUG: Started thread 7 > (gw/bb_smscconn.c:sms_router) > 2011-01-07 13:53:20 [11514] [0] INFO: > ---------------------------------------- > 2011-01-07 13:53:20 [11514] [0] INFO: Kannel bearerbox II version starting > 2011-01-07 13:53:20 [11514] [0] INFO: Loading store file > `/etc/kannel/kannel.store' > 2011-01-07 13:53:20 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: device opened. > Telnet mode = 0 > 2011-01-07 13:53:20 [11514] [7] DEBUG: Thread 7 > (gw/bb_smscconn.c:sms_router) maps to pid 11514. > 2011-01-07 13:53:20 [11514] [0] INFO: Store-file size 0, starting to unpack > 2011-01-07 13:53:20 [11514] [0] INFO: Retrieved 0 messages, non-acknowledged > messages: 0 > 2011-01-07 13:53:20 [11514] [0] DEBUG: Started thread 8 > (gw/bb_store_file.c:store_dumper) > 2011-01-07 13:53:20 [11514] [0] INFO: MAIN: Start-up done, entering mainloop > 2011-01-07 13:53:20 [11514] [0] DEBUG: AT2[/dev/ttyACM0]: start called > 2011-01-07 13:53:20 [11514] [8] DEBUG: Thread 8 > (gw/bb_store_file.c:store_dumper) maps to pid 11514. > 2011-01-07 13:53:20 [11514] [8] DEBUG: Dumping 0 messages to store > 2011-01-07 13:53:21 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: device opened > 2011-01-07 13:53:21 [11514] [6] INFO: AT2[/dev/ttyACM0]: Logging in > 2011-01-07 13:53:21 [11514] [6] INFO: AT2[/dev/ttyACM0]: init device > 2011-01-07 13:53:21 [11514] [6] INFO: AT2[/dev/ttyACM0]: speed set to 115200 > 2011-01-07 13:53:21 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> ATZ^M > 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK > 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT^M > 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- AT > 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK > 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT&F^M > 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- AT&F > 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK > 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> ATE0^M > 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- ATE0 > 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK > 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+IFC=2,2^M > 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK > 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+CMGF=0^M > 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK > 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+CSMS=?^M > 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- +CSMS: (0) > 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK > 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> > AT+CNMI=1,2,0,1,0^M > 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- ERROR > 2011-01-07 13:53:22 [11514] [6] ERROR: AT2[/dev/ttyACM0]: Generic error: > ERROR > 2011-01-07 13:53:22 [11514] [6] ERROR: AT2[/dev/ttyACM0]: Initialization of > device failed. > 2011-01-07 13:53:22 [11514] [6] INFO: AT2[/dev/ttyACM0]: Closing device > 2011-01-07 13:53:23 [11514] [6] ERROR: AT2[/dev/ttyACM0]: Couldn't connect > (retrying in 10 seconds). > 2011-01-07 13:53:33 [11514] [6] INFO: AT2[/dev/ttyACM0]: opening device > 2011-01-07 13:53:33 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: device opened. > Telnet mode = 0 > 2011-01-07 13:53:34 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: device opened > 2011-01-07 13:53:34 [11514] [6] INFO: AT2[/dev/ttyACM0]: Logging in > 2011-01-07 13:53:34 [11514] [6] INFO: AT2[/dev/ttyACM0]: init device > 2011-01-07 13:53:34 [11514] [6] INFO: AT2[/dev/ttyACM0]: speed set to 115200 > 2011-01-07 13:53:34 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> ATZ^M > 2011-01-07 13:53:34 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK > 2011-01-07 13:53:34 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT^M > 2011-01-07 13:53:34 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- AT > 2011-01-07 13:53:34 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK > 2011-01-07 13:53:34 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT&F^M > 2011-01-07 13:53:35 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- AT&F > 2011-01-07 13:53:35 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK > 2011-01-07 13:53:35 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> ATE0^M > 2011-01-07 13:53:35 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- ATE0 > 2011-01-07 13:53:35 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK > 2011-01-07 13:53:35 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+IFC=2,2^M > 2011-01-07 13:53:35 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK > 2011-01-07 13:53:35 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+CMGF=0^M > 2011-01-07 13:53:35 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK > 2011-01-07 13:53:35 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+CSMS=?^M > 2011-01-07 13:53:35 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- +CSMS: (0) > 2011-01-07 13:53:35 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK > 2011-01-07 13:53:35 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> > AT+CNMI=1,2,0,1,0^M > 2011-01-07 13:53:35 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- ERROR > 2011-01-07 13:53:35 [11514] [6] ERROR: AT2[/dev/ttyACM0]: Generic error: > ERROR > 2011-01-07 13:53:35 [11514] [6] ERROR: AT2[/dev/ttyACM0]: Initialization of > device failed. > 2011-01-07 13:53:35 [11514] [6] INFO: AT2[/dev/ttyACM0]: Closing device > 2011-01-07 13:53:35 [11514] [6] ERROR: AT2[/dev/ttyACM0]: Couldn't connect > (retrying in 10 seconds). > 2011-01-07 13:53:45 [11514] [6] INFO: AT2[/dev/ttyACM0]: opening device > 2011-01-07 13:53:45 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: device opened. > Telnet mode = 0 > 2011-01-07 13:53:46 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: device opened > 2011-01-07 13:53:46 [11514] [6] INFO: AT2[/dev/ttyACM0]: Logging in > 2011-01-07 13:53:47 [11514] [6] INFO: AT2[/dev/ttyACM0]: init device > 2011-01-07 13:53:47 [11514] [6] INFO: AT2[/dev/ttyACM0]: speed set to 115200 > 2011-01-07 13:53:47 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> ATZ^M > 2011-01-07 13:53:47 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK > 2011-01-07 13:53:47 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT^M > 2011-01-07 13:53:47 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- AT > 2011-01-07 13:53:47 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK > 2011-01-07 13:53:47 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT&F^M > 2011-01-07 13:53:47 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- AT&F > 2011-01-07 13:53:47 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK > 2011-01-07 13:53:47 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> ATE0^M > 2011-01-07 13:53:48 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- ATE0 > 2011-01-07 13:53:48 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK > 2011-01-07 13:53:48 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+IFC=2,2^M > 2011-01-07 13:53:48 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK > 2011-01-07 13:53:48 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+CMGF=0^M > 2011-01-07 13:53:48 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK > 2011-01-07 13:53:48 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+CSMS=?^M > 2011-01-07 13:53:48 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- +CSMS: (0) > 2011-01-07 13:53:48 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK > 2011-01-07 13:53:48 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> > AT+CNMI=1,2,0,1,0^M > 2011-01-07 13:53:48 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- ERROR > 2011-01-07 13:53:48 [11514] [6] ERROR: AT2[/dev/ttyACM0]: Generic error: > ERROR > 2011-01-07 13:53:48 [11514] [6] ERROR: AT2[/dev/ttyACM0]: Initialization of > device failed. > 2011-01-07 13:53:48 [11514] [6] INFO: AT2[/dev/ttyACM0]: Closing device > 2011-01-07 13:53:48 [11514] [6] ERROR: AT2[/dev/ttyACM0]: Couldn't connect > (retrying in 10 seconds). > ^C2011-01-07 13:53:50 [11514] [0] WARNING: Killing signal or HTTP admin > command received, shutting down... > 2011-01-07 13:53:50 [11514] [0] DEBUG: Shutting down Kannel... > 2011-01-07 13:53:50 [11514] [0] DEBUG: shutting down smsc > 2011-01-07 13:53:50 [11514] [0] DEBUG: AT2[/dev/ttyACM0]: Shutting down > SMSCConn, slow > 2011-01-07 13:53:50 [11514] [0] DEBUG: shutting down udp > 2011-01-07 13:53:50 [11514] [6] INFO: AT2[/dev/ttyACM0]: opening device > 2011-01-07 13:53:50 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: device opened. > Telnet mode = 0 > ^C2011-01-07 13:53:50 [11514] [4] DEBUG: Thread 4 > (gw/bb_boxc.c:sms_to_smsboxes) terminates. > 2011-01-07 13:53:50 [11514] [7] DEBUG: Thread 7 > (gw/bb_smscconn.c:sms_router) terminates. > 2011-01-07 13:53:50 [11514] [5] DEBUG: Thread 5 (gw/bb_boxc.c:smsboxc_run) > terminates. > 2011-01-07 13:53:51 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: device opened > 2011-01-07 13:53:51 [11514] [6] INFO: AT2[/dev/ttyACM0]: Logging in > 2011-01-07 13:53:52 [11514] [6] INFO: AT2[/dev/ttyACM0]: init device > 2011-01-07 13:53:52 [11514] [6] INFO: AT2[/dev/ttyACM0]: speed set to 115200 > 2011-01-07 13:53:52 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> ATZ^M > 2011-01-07 13:53:52 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK > 2011-01-07 13:53:52 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT^M > 2011-01-07 13:53:52 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- AT > 2011-01-07 13:53:52 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK > 2011-01-07 13:53:52 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT&F^M > 2011-01-07 13:53:52 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- AT&F > 2011-01-07 13:53:52 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK > 2011-01-07 13:53:52 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> ATE0^M > 2011-01-07 13:53:52 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- ATE0 > 2011-01-07 13:53:52 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK > 2011-01-07 13:53:52 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+IFC=2,2^M > 2011-01-07 13:53:52 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK > 2011-01-07 13:53:52 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+CMGF=0^M > 2011-01-07 13:53:52 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK > 2011-01-07 13:53:52 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+CSMS=?^M > 2011-01-07 13:53:53 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- +CSMS: (0) > 2011-01-07 13:53:53 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK > 2011-01-07 13:53:53 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> > AT+CNMI=1,2,0,1,0^M > 2011-01-07 13:53:53 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: <-- ERROR > 2011-01-07 13:53:53 [11514] [6] ERROR: AT2[/dev/ttyACM0]: Generic error: > ERROR > 2011-01-07 13:53:53 [11514] [6] ERROR: AT2[/dev/ttyACM0]: Initialization of > device failed. > 2011-01-07 13:53:53 [11514] [6] INFO: AT2[/dev/ttyACM0]: Closing device > 2011-01-07 13:53:53 [11514] [6] INFO: AT2[/dev/ttyACM0]: Closing device > 2011-01-07 13:53:53 [11514] [6] DEBUG: Thread 6 > (gw/smsc/smsc_at.c:at2_device_thread) terminates. > 2011-01-07 13:53:53 [11514] [0] INFO: All flow threads have died, killing > core > 2011-01-07 13:53:53 [11514] [3] DEBUG: HTTP: No clients with requests, > quitting. > 2011-01-07 13:53:53 [11514] [3] DEBUG: Thread 3 (gw/bb_http.c:httpadmin_run) > terminates. > 2011-01-07 13:53:53 [11514] [0] DEBUG: Waiting for 2 > (gwlib/http.c:server_thread) to terminate > 2011-01-07 13:53:53 [11514] [2] DEBUG: Thread 2 (gwlib/http.c:server_thread) > terminates. > 2011-01-07 13:53:53 [11514] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller) > terminates. > 2011-01-07 13:53:53 [11514] [0] DEBUG: final clean-up for SMSCConn > 2011-01-07 13:53:53 [11514] [0] DEBUG: smsbox MO concatenated message > handling cleaned up > 2011-01-07 13:53:53 [11514] [8] DEBUG: Dumping 0 messages to store > 2011-01-07 13:53:53 [11514] [8] DEBUG: Thread 8 > (gw/bb_store_file.c:store_dumper) terminates. > 2011-01-07 13:53:53 [11514] [0] INFO: Total WDP messages: received 0, sent 0 > 2011-01-07 13:53:53 [11514] [0] INFO: Total SMS messages: received 0, sent 0 > 2011-01-07 13:53:53 [11514] [0] DEBUG: Immutable octet strings: 233. > > It seems that Nokia 6300 cannot doesn't understand the command > AT+CNMI=1,2,0,1,0^M. > Could someone help me to fix it ? >
