With the Nokia 6300, you can send SMS but can not receive. This is because the AT+CNMI command (which has to do with New Message Indication) is responsible for notifying your device about new messages which kannel uses to trap incoming SMS. Also for your error, you can connect the phone and install wvdial. That way, it will display the correct speed and init-string command for your; without the CNMI option of course.
Hopes this helps. On 1/7/11, ABOUDOU B. Loukmane <[email protected]> wrote: > Le 07/01/2011 15:36, Alvaro Cornejo a écrit : >> I don't now the 6300 but: >> >> It depends on what you want to do. If it is only to send sms yes, you >> can use it. If you want to process incomming messages no if it does >> not support CNMI command since the phone has no way to pass incomming >> messages to kannel. >> >> It is known that several nokia phones does not support CNMI command >> but don't know wich models. try to find it as stated below or search >> the list for any previous reference. >> >> There are however some workarrounds but better if you can use other >> phone/modem. >> >> Regards >> >> Alvaro >> |-----------------------------------------------------------------------------------------------------------------| >> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier >> celular y Nextel >> en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via >> SMS y GPRS online >> Visitenos en www.perusms.NET www.smsglobal.com.mx y >> www.pravcom.com >> >> >> >> On Fri, Jan 7, 2011 at 9:17 AM, ABOUDOU B. Loukmane<[email protected]> >> wrote: >>> Le 07/01/2011 14:59, Alvaro Cornejo a écrit : >>>> Hi >>>> >>>> Some nokía phones does not support cnmi command. >>>> >>>> Try connecting from a terminal window with a communication sw like cu >>>> or minicom. >>>> >>>> send CNMI? or AT+CNMI=? to see what it did respond. If you do get an >>>> errror, command is not supported; therefore just remove from config. >>>> >>>> BTW CNMI command allows your phone to forward the MOs to kannel for >>>> future process by your app. >>>> >>>> Regards >>>> >>>> Alvaro >>>> >>>> >>>> >>>> |-----------------------------------------------------------------------------------------------------------------| >>>> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier >>>> celular y Nextel >>>> en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via >>>> SMS y GPRS online >>>> Visitenos en www.perusms.NET www.smsglobal.com.mx y >>>> www.pravcom.com >>>> >>>> >>>> >>>> On Fri, Jan 7, 2011 at 8:39 AM, ABOUDOU B. Loukmane<[email protected]> >>>> wrote: >>>>> Le 31/12/2010 20:03, Mfawa Alfred Onen a écrit : >>>>> >>>>> Ok also are you sure of the port the Nokia 6300 gets mounted on? I used >>>>> a >>>>> Nokia 6300 Before and mine was port "/dev/ttyACM0 or /dev/ttyACM1". Try >>>>> and >>>>> run "dmesg" on your system to trace where the system mounted your >>>>> Nokia. >>>>> Of >>>>> course I assume you are using a USB cable. >>>>> >>>>> On Fri, Dec 31, 2010 at 12:54 PM, ABOUDOU B. >>>>> Loukmane<[email protected]> >>>>> wrote: >>>>>> Le 31/12/2010 11:33, Mfawa Alfred Onen a écrit : >>>>>>> Make sure kannel can read the device location. Try issuing "chmod 777 >>>>>>> /dev/ttyS0" and restart kannel. >>>>>>> >>>>>>> On 12/31/10, ABOUDOU B. Loukmane<[email protected]> wrote: >>>>>>>> Hi everybody, >>>>>>>> >>>>>>>> I have some troubles to send an sms through kannel. >>>>>>>> Here is my bearerbox.log: >>>>>>>> >>>>>>>> 2010-12-31 08:44:31 [12099] [8] ERROR: AT2[/dev/ttyS0]: open failed! >>>>>>>> ERRNO=13 >>>>>>>> 2010-12-31 08:44:31 [12099] [8] ERROR: System error 13: Permission >>>>>>>> denied >>>>>>>> 2010-12-31 08:44:31 [12099] [8] ERROR: AT2[/dev/ttyS0]: >>>>>>>> at2_device_thread: open_at2_device failed. Terminating >>>>>>>> 2010-12-31 08:44:31 [12099] [8] ERROR: System error 13: Permission >>>>>>>> denied >>>>>>>> 2010-12-31 08:44:31 [12099] [8] INFO: AT2[/dev/ttyS0]: opening >>>>>>>> device >>>>>>>> 2010-12-31 08:44:31 [12099] [8] ERROR: AT2[/dev/ttyS0]: open failed! >>>>>>>> ERRNO=13 >>>>>>>> 2010-12-31 08:44:31 [12099] [8] ERROR: System error 13: Permission >>>>>>>> denied >>>>>>>> 2010-12-31 08:44:31 [12099] [8] ERROR: AT2[/dev/ttyS0]: >>>>>>>> at2_device_thread: open_at2_device failed. Terminating >>>>>>>> 2010-12-31 08:44:31 [12099] [8] ERROR: System error 13: Permission >>>>>>>> denied >>>>>>>> 2010-12-31 08:44:31 [12099] [8] INFO: AT2[/dev/ttyS0]: opening >>>>>>>> device >>>>>>>> 2010-12-31 08:44:31 [12099] [8] ERROR: AT2[/dev/ttyS0]: open failed! >>>>>>>> ERRNO=13 >>>>>>>> 2010-12-31 08:44:31 [12099] [8] ERROR: System error 13: Permission >>>>>>>> denied >>>>>>>> 2010-12-31 08:44:31 [12099] [8] ERROR: AT2[/dev/ttyS0]: >>>>>>>> at2_device_thread: open_at2_device failed. Terminating >>>>>>>> 2010-12-31 08:44:31 [12099] [8] ERROR: System error 13: Permission >>>>>>>> denied >>>>>>>> 2010-12-31 08:44:31 [12099] [8] INFO: AT2[/dev/ttyS0]: opening >>>>>>>> device >>>>>>>> 2010-12-31 08:44:31 [12099] [8] ERROR: AT2[/dev/ttyS0]: open failed! >>>>>>>> ERRNO=13 >>>>>>>> 2010-12-31 08:44:31 [12099] [8] ERROR: System error 13: Permission >>>>>>>> denied >>>>>>>> 2010-12-31 08:44:31 [12099] [8] ERROR: AT2[/dev/ttyS0]: >>>>>>>> at2_device_thread: open_at2_device failed. Terminating >>>>>>>> 2010-12-31 08:44:31 [12099] [8] ERROR: System error 13: Permission >>>>>>>> denied >>>>>>>> 2010-12-31 08:44:31 [12099] [8] INFO: AT2[/dev/ttyS0]: opening >>>>>>>> device >>>>>>>> 2010-12-31 08:44:31 [12099] [8] ERROR: AT2[/dev/ttyS0]: open failed! >>>>>>>> ERRNO=13 >>>>>>>> 2010-12-31 08:44:31 [12099] [8] ERROR: System error 13: Permission >>>>>>>> denied >>>>>>>> 2010-12-31 08:44:31 [12099] [8] ERROR: AT2[/dev/ttyS0]: >>>>>>>> at2_device_thread: open_at2_device failed. Terminating >>>>>>>> 2010-12-31 08:44:31 [12099] [8] ERROR: System error 13: Permission >>>>>>>> denied >>>>>>>> 2010-12-31 08:44:31 [12099] [8] INFO: AT2[/dev/ttyS0]: opening >>>>>>>> device >>>>>>>> 2010-12-31 08:44:31 [12099] [8] ERROR: AT2[/dev/ttyS0]: open failed! >>>>>>>> ERRNO=13 >>>>>>>> 2010-12-31 08:44:31 [12099] [8] ERROR: System error 13: Permission >>>>>>>> denied >>>>>>>> 2010-12-31 08:44:31 [12099] [8] ERROR: AT2[/dev/ttyS0]: >>>>>>>> at2_device_thread: open_at2_device failed. Terminating >>>>>>>> 2010-12-31 08:44:31 [12099] [8] ERROR: System error 13: Permission >>>>>>>> denied >>>>>>>> 2010-12-31 08:44:31 [12099] [8] INFO: AT2[/dev/ttyS0]: opening >>>>>>>> device >>>>>>>> 2010-12-31 08:44:31 [12099] [8] ERROR: AT2[/dev/ttyS0]: open failed! >>>>>>>> ERRNO=13 >>>>>>>> 2010-12-31 08:44:31 [12099] [8] ERROR: System error 13: Permission >>>>>>>> denied >>>>>>>> 2010-12-31 08:44:31 [12099] [8] ERROR: AT2[/dev/ttyS0]: >>>>>>>> at2_device_thread: open_at2_device failed. Terminating >>>>>>>> 2010-12-31 08:44:31 [12099] [8] ERROR: System error 13: Permission >>>>>>>> denied >>>>>>>> 2010-12-31 08:44:31 [12099] [8] INFO: AT2[/dev/ttyS0]: opening >>>>>>>> device >>>>>>>> 2010-12-31 08:44:31 [12099] [8] ERROR: AT2[/dev/ttyS0]: open failed! >>>>>>>> ERRNO=13 >>>>>>>> 2010-12-31 08:44:31 [12099] [8] ERROR: System error 13: Permission >>>>>>>> denied >>>>>>>> 2010-12-31 08:44:31 [12099] [8] ERROR: AT2[/dev/ttyS0]: >>>>>>>> at2_device_thread: open_at2_device failed. Terminating >>>>>>>> 2010-12-31 08:44:31 [12099] [8] ERROR: System error 13: Permission >>>>>>>> denied >>>>>>>> 2010-12-31 08:44:31 [12099] [8] INFO: AT2[/dev/ttyS0]: opening >>>>>>>> device >>>>>>>> 2010-12-31 08:44:31 [12099] [8] ERROR: AT2[/dev/ttyS0]: open failed! >>>>>>>> ERRNO=13 >>>>>>>> 2010-12-31 08:44:31 [12099] [8] ERROR: System error 13: Permission >>>>>>>> denied >>>>>>>> 2010-12-31 08:44:31 [12099] [8] ERROR: AT2[/dev/ttyS0]: >>>>>>>> at2_device_thread: open_at2_device failed. Terminating >>>>>>>> 2010-12-31 08:44:31 [12099] [8] ERROR: System error 13: Permission >>>>>>>> denied >>>>>>>> 2010-12-31 08:44:31 [12099] [8] INFO: AT2[/dev/ttyS0]: opening >>>>>>>> device >>>>>>>> 2010-12-31 08:44:31 [12099] [0] INFO: >>>>>>>> ---------------------------------------- >>>>>>>> 2010-12-31 08:44:31 [12099] [0] INFO: Kannel bearerbox II version >>>>>>>> 1.4.1 >>>>>>>> starting >>>>>>>> 2010-12-31 08:44:31 [12099] [0] INFO: Loading store file >>>>>>>> `/etc/kannel/kannel.store' >>>>>>>> 2010-12-31 08:44:31 [12099] [0] INFO: Store-file size 0, starting to >>>>>>>> unpack >>>>>>>> 2010-12-31 08:44:31 [12099] [0] INFO: Retrieved 0 messages, >>>>>>>> non-acknowledged messages: 0 >>>>>>>> 2010-12-31 08:44:31 [12099] [0] ERROR: Failed to open >>>>>>>> '/etc/kannel/kannel.store.new' for writing, cannot create store-file >>>>>>>> 2010-12-31 08:44:31 [12099] [0] ERROR: System error 13: Permission >>>>>>>> denied >>>>>>>> 2010-12-31 08:44:31 [12099] [0] PANIC: Cannot start with store-file >>>>>>>> failing >>>>>>>> 2010-12-31 08:44:31 [12099] [0] PANIC: >>>>>>>> /usr/sbin/bearerbox(gw_panic+0x101) [0x80c60f1] >>>>>>>> 2010-12-31 08:44:31 [12099] [0] PANIC: >>>>>>>> /usr/sbin/bearerbox(main+0xc44) >>>>>>>> [0x8053714] >>>>>>>> 2010-12-31 08:44:31 [12099] [0] PANIC: >>>>>>>> /lib/i686/cmov/libc.so.6(__libc_start_main+0xe5) [0xb70f8455] >>>>>>>> 2010-12-31 08:44:31 [12099] [0] PANIC: /usr/sbin/bearerbox >>>>>>>> [0x8051d31] >>>>>>>> >>>>>>>> >>>>>>>> my kannel.conf : >>>>>>>> >>>>>>>> >>>>>>>> group = core >>>>>>>> admin-port = 13000 >>>>>>>> admin-password = bar >>>>>>>> #status-password = foo >>>>>>>> admin-deny-ip = "*.*.*.*" >>>>>>>> admin-allow-ip = "127.0.0.1;192.168.9.*" >>>>>>>> log-file = "/var/log/kannel/kannel.log" >>>>>>>> log-level = 1 >>>>>>>> access-log = "/var/log/kannel/access.log" >>>>>>>> #http-proxy-host = "127.0.0.1" >>>>>>>> #http-proxy-port = 8080 >>>>>>>> #http-proxy-exceptions = "127.0.0.1" >>>>>>>> #http-proxy-username = "user" >>>>>>>> #http-proxy-password = "password" >>>>>>>> #ssl-certkey-file = "mycertandprivkeyfile.pem" >>>>>>>> # Smsbox related >>>>>>>> smsbox-port = 13013 >>>>>>>> box-deny-ip = "*.*.*.*" >>>>>>>> box-allow-ip = "127.0.0.1;192.168.9.*" >>>>>>>> unified-prefix = "00241,00358,0" >>>>>>>> white-list = "http://127.0.0.1/white-list.txt"; >>>>>>>> black-list = "http://127.0.0.1/black-list.txt"; >>>>>>>> store-file = "/etc/kannel/kannel.store" >>>>>>>> # Wapbox related >>>>>>>> #wapbox-port = 13002 >>>>>>>> #udp-deny-ip = "*.*.*.*" >>>>>>>> #udp-allow-ip = "127.0.0.1" >>>>>>>> #wdp-interface-name = "*" >>>>>>>> >>>>>>>> >>>>>>>> # SMSC CONNECTIONS - GLOBAL FIELDS >>>>>>>> #group = smsc >>>>>>>> #smsc = >>>>>>>> #smsc-id = ID >>>>>>>> #denied-smsc-id = "X;Y" >>>>>>>> #allowed-smsc-id = "Z" >>>>>>>> #preferred-smsc-id = "W" >>>>>>>> #allowed-prefix = "040;050" >>>>>>>> #denied-prefix = "060;070" >>>>>>>> #alt-charset = >>>>>>>> >>>>>>>> >>>>>>>> # SMSC Nokia CIMD2 >>>>>>>> #group = smsc >>>>>>>> #smsc = cimd2 >>>>>>>> #host = >>>>>>>> #port = >>>>>>>> #smsc-username = >>>>>>>> #smsc-password = >>>>>>>> #keepalive = >>>>>>>> #sender-prefix = >>>>>>>> >>>>>>>> >>>>>>>> # SMSC EMI >>>>>>>> #group = smsc >>>>>>>> #smsc = emi2 >>>>>>>> #smsc = emi_ip to use the old implementation >>>>>>>> #host = >>>>>>>> #port = >>>>>>>> #smsc-username = >>>>>>>> #smsc-password = >>>>>>>> #device = /dev/ >>>>>>>> #phone = >>>>>>>> #our-port = >>>>>>>> #receive-port = >>>>>>>> #connect-allow-ip = >>>>>>>> #keepalive = >>>>>>>> #flow-control = >>>>>>>> >>>>>>>> >>>>>>>> # SMSC SMPP >>>>>>>> #group = smsc >>>>>>>> #smsc = smpp >>>>>>>> #host = >>>>>>>> #port = >>>>>>>> #receive-port = >>>>>>>> #smsc-username = >>>>>>>> #smsc-password = >>>>>>>> #system-type = >>>>>>>> #address-range = >>>>>>>> >>>>>>>> >>>>>>>> # SMSC SEMA >>>>>>>> #group = smsc >>>>>>>> #smsc = sema >>>>>>>> #device = /dev/tty0 >>>>>>>> #smsc_nua = (X121 smsc address) >>>>>>>> #home_nua = (x121 radio pad address) >>>>>>>> #wait_report = 0/1 (0 means false, 1 means true) >>>>>>>> >>>>>>>> >>>>>>>> # SMSC OIS >>>>>>>> #group = smsc >>>>>>>> #smsc = ois >>>>>>>> #host = 103.102.101.100 >>>>>>>> #port = 10000 >>>>>>>> #receive-port = 10000 >>>>>>>> #ois-debug-level = 0 >>>>>>>> >>>>>>>> >>>>>>>> # SMSC GSM >>>>>>>> group = smsc >>>>>>>> smsc = at >>>>>>>> device = /dev/ttyS0 >>>>>>>> modemtype = nokia_6300 >>>>>>>> my-number = 07002033 >>>>>>>> speed = 115200 >>>>>>>> #pin = 2345 >>>>>>>> #validityperiod = 167 >>>>>>>> include = /etc/kannel/modems.conf >>>>>>>> >>>>>>>> # SMSC Fake >>>>>>>> #group = smsc >>>>>>>> #smsc = fake >>>>>>>> #host = >>>>>>>> #port = >>>>>>>> #connect-allow-ip = >>>>>>>> >>>>>>>> >>>>>>>> # SMSC HTTP >>>>>>>> #group = smsc >>>>>>>> #smsc = http >>>>>>>> #system-type = kannel >>>>>>>> #send-url = >>>>>>>> #port = >>>>>>>> #connect-allow-ip = >>>>>>>> #username = >>>>>>>> #password = >>>>>>>> >>>>>>>> >>>>>>>> # SMSBOX SETUP >>>>>>>> >>>>>>>> group = smsbox >>>>>>>> bearerbox-host = localhost >>>>>>>> sendsms-port = 13014 >>>>>>>> global-sender = 13014 >>>>>>>> sendsms-chars = "0123456789 +-" >>>>>>>> log-file = "/var/log/kannel/smsbox.log" >>>>>>>> log-level = 0 >>>>>>>> #access-log = "access.log" >>>>>>>> #white-list = >>>>>>>> #black-list = >>>>>>>> #reply-couldnotfetch = >>>>>>>> #reply-couldnotrepresent = >>>>>>>> #reply-requestfailed = >>>>>>>> #reply-emptymessage = >>>>>>>> >>>>>>>> >>>>>>>> # SEND-SMS USERS >>>>>>>> >>>>>>>> group = sendsms-user >>>>>>>> username = nyrvan >>>>>>>> password = 007 >>>>>>>> #user-deny-ip = "" >>>>>>>> user-allow-ip = "127.0.0.1;192.168.9.*" >>>>>>>> >>>>>>>> # this sender is for Kannel relay testing (http_smsc) >>>>>>>> >>>>>>>> #group = sendsms-user >>>>>>>> #username = kannel >>>>>>>> #password = rL4y >>>>>>>> #user-deny-ip = "*.*.*.*" >>>>>>>> #user-allow-ip = "127.0.0.1" >>>>>>>> #name = service_kannel >>>>>>>> #forced-smsc = ID >>>>>>>> #default-smsc = ID >>>>>>>> #faked-sended = >>>>>>>> #max-messages = 1 >>>>>>>> #concatenation = 1 >>>>>>>> #split-chars = >>>>>>>> #split-suffix = >>>>>>>> #omit-empty = >>>>>>>> #header = >>>>>>>> #footer = >>>>>>>> #allowed-prefix = >>>>>>>> #denied-prefix = >>>>>>>> #white-list = >>>>>>>> #black-list = >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> # SMS SERVICES >>>>>>>> >>>>>>>> #group = sms-service >>>>>>>> #name = nothing >>>>>>>> #keyword = nop >>>>>>>> #aliases = "noppy;niente" >>>>>>>> #text = "You asked nothing and I did it!" >>>>>>>> #get-url = "http://"; >>>>>>>> #post-url = "http://"; >>>>>>>> #file = "/tmp/" >>>>>>>> #accepted-smsc = ID >>>>>>>> #allowed-prefix = >>>>>>>> #denied-prefix = >>>>>>>> #catch-all = false >>>>>>>> #send-sender = false >>>>>>>> #strip-keyword = false >>>>>>>> #faked-sender = >>>>>>>> #max-messages = 1 >>>>>>>> #accept-x-kannel-headers = false >>>>>>>> #assume-plain-text = false >>>>>>>> #concatenation = false >>>>>>>> #split-chars = >>>>>>>> #split-suffix = "+" >>>>>>>> #omit-empty = true >>>>>>>> #header = >>>>>>>> #footer = >>>>>>>> #prefix = >>>>>>>> #suffix = >>>>>>>> #white-list = >>>>>>>> #black-list = >>>>>>>> >>>>>>>> >>>>>>>> # SMS SERVICE GET-URL EXAMPLE >>>>>>>> #group = sms-service >>>>>>>> #keyword = relay >>>>>>>> #get-url = >>>>>>>> "http://localhost/service?phone=%p&text=%r&binary=%b&smsc=$i&time=%t >>>>>>>> >>>>>>>> >>>>>>>> # SMS SERVICE black-list >>>>>>>> #group = sms-service >>>>>>>> #keyword = black-list >>>>>>>> #text = "You are not alowed to use this service, Go away!" >>>>>>>> >>>>>>>> >>>>>>>> # SMS SERVICE Default >>>>>>>> # there should be default always >>>>>>>> group = sms-service >>>>>>>> keyword = default >>>>>>>> text = "No service specified" >>>>>>>> >>>>>>>> my modem.conf : >>>>>>>> >>>>>>>> group = modems >>>>>>>> id = nokia_6300 >>>>>>>> name = "Nokia" >>>>>>>> detect-string = "Nokia" >>>>>>>> detect-string2 = "RM-217" >>>>>>>> need-sleep = true >>>>>>>> enable-mms = true >>>>>>>> speed = 115200 >>>>>>>> no-pin = true >>>>>>>> >>>>>>>> Could someone help me ? >>>>>>>> >>>>>>>> Thank you. >>>>>>>> >>>>>>>> Regards >>>>>>>> >>>>>>>> >>>>>>>> >>>>>> Thank you M. Mfawa Alfred Onen for your answer. >>>>>> I Chmod on 777 /dev/ttyS0 but no changes . >>>>>> >>>>> >>>>> -- >>>>> Mfawa Alfred Onen >>>>> M.Sc Telecoms, B.Eng Elect/Elect, CCNA, RHCE(in view) >>>>> System Administrator >>>>> Department of Computer Science, >>>>> Bingham University. >>>>> >>>>> E-Mail: [email protected] >>>>> Phone1: +234 805 944 3154 >>>>> Phone2: +234 803 079 6088 >>>>> >>>>> >>>>> Thank you Mfawa Alfred Onen, the right port was /dev/ttyACM0. >>>>> But i have an other problem. >>>>> Here is my kannel.log: >>>>> >>>>> xxxxxxxxxx:/home/nyrvan# /usr/local/sbin/bearerbox >>>>> /etc/kannel/kannel.conf >>>>> 2011-01-07 13:53:20 [11514] [0] INFO: Debug_lvl = -1, log_file =<none>, >>>>> log_lvl = 0 >>>>> 2011-01-07 13:53:20 [11514] [0] DEBUG: Loading include file >>>>> `/etc/kannel/modems.conf' (on line 118 of file >>>>> /etc/kannel/kannel.conf). >>>>> 2011-01-07 13:53:20 [11514] [0] WARNING: DLR: using default 'internal' >>>>> for >>>>> storage type. >>>>> 2011-01-07 13:53:20 [11514] [0] INFO: DLR using storage type: internal >>>>> 2011-01-07 13:53:20 [11514] [0] DEBUG: Kannel bearerbox version `'. >>>>> Build `Jan 6 2011 18:01:30', compiler `4.3.2'. >>>>> System Linux, release 2.6.26-2-686, version #1 SMP Thu Aug 19 03:44:10 >>>>> UTC >>>>> 2010, machine i686. >>>>> Hostname xxxxxxxxxx.xxxxxx.xxx, IP xxx.xxx.xxx.xxx. >>>>> Libxml version 2.6.32. >>>>> Using native malloc. >>>>> >>>>> 2011-01-07 13:53:20 [11514] [0] INFO: Added logfile >>>>> `/var/log/kannel/kannel.log' with level `1'. >>>>> 2011-01-07 13:53:20 [11514] [0] INFO: Started access logfile >>>>> `/var/log/kannel/access.log'. >>>>> 2011-01-07 13:53:20 [11514] [0] WARNING: 'store-file' option >>>>> deprecated, >>>>> please use 'store-location' and 'store-type' instead. >>>>> 2011-01-07 13:53:20 [11514] [0] INFO: SSL not supported, no SSL >>>>> initialization done. >>>>> 2011-01-07 13:53:20 [11514] [0] INFO: HTTP: Opening server at port >>>>> 13000. >>>>> 2011-01-07 13:53:20 [11514] [0] DEBUG: Started thread 1 >>>>> (gwlib/fdset.c:poller) >>>>> 2011-01-07 13:53:20 [11514] [0] DEBUG: Started thread 2 >>>>> (gwlib/http.c:server_thread) >>>>> 2011-01-07 13:53:20 [11514] [0] DEBUG: Started thread 3 >>>>> (gw/bb_http.c:httpadmin_run) >>>>> 2011-01-07 13:53:20 [11514] [0] DEBUG: starting smsbox connection >>>>> module >>>>> 2011-01-07 13:53:20 [11514] [0] INFO: BOXC: 'smsbox-max-pending' not >>>>> set, >>>>> using default (100). >>>>> 2011-01-07 13:53:20 [11514] [0] DEBUG: Started thread 4 >>>>> (gw/bb_boxc.c:sms_to_smsboxes) >>>>> 2011-01-07 13:53:20 [11514] [0] DEBUG: Started thread 5 >>>>> (gw/bb_boxc.c:smsboxc_run) >>>>> 2011-01-07 13:53:20 [11514] [0] INFO: Set SMS resend frequency to 60 >>>>> seconds. >>>>> 2011-01-07 13:53:20 [11514] [0] INFO: SMS resend retry set to >>>>> unlimited. >>>>> 2011-01-07 13:53:20 [11514] [0] DEBUG: smsbox MO concatenated message >>>>> handling enabled >>>>> 2011-01-07 13:53:20 [11514] [0] INFO: DLR rerouting for smsc id<(null)> >>>>> disabled. >>>>> 2011-01-07 13:53:20 [11514] [0] INFO: AT2[/dev/ttyACM0]: configuration >>>>> shows >>>>> modemtype<nokia_6300> >>>>> 2011-01-07 13:53:20 [11514] [0] DEBUG: AT2[/dev/ttyACM0]: Reading modem >>>>> definitions from</etc/kannel/kannel.conf> >>>>> 2011-01-07 13:53:20 [11514] [0] DEBUG: Loading include file >>>>> `/etc/kannel/modems.conf' (on line 118 of file >>>>> /etc/kannel/kannel.conf). >>>>> 2011-01-07 13:53:20 [11514] [0] DEBUG: AT2[/dev/ttyACM0]: Found<12> >>>>> modems >>>>> in config >>>>> 2011-01-07 13:53:20 [11514] [0] INFO: AT2[/dev/ttyACM0]: read modem >>>>> definition for<Nokia> >>>>> 2011-01-07 13:53:20 [11514] [4] DEBUG: Thread 4 >>>>> (gw/bb_boxc.c:sms_to_smsboxes) maps to pid 11514. >>>>> 2011-01-07 13:53:20 [11514] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller) >>>>> maps >>>>> to pid 11514. >>>>> 2011-01-07 13:53:20 [11514] [5] DEBUG: Thread 5 >>>>> (gw/bb_boxc.c:smsboxc_run) >>>>> maps to pid 11514. >>>>> 2011-01-07 13:53:20 [11514] [3] DEBUG: Thread 3 >>>>> (gw/bb_http.c:httpadmin_run) >>>>> maps to pid 11514. >>>>> 2011-01-07 13:53:20 [11514] [6] DEBUG: Thread 6 >>>>> (gw/smsc/smsc_at.c:at2_device_thread) maps to pid 11514. >>>>> 2011-01-07 13:53:20 [11514] [6] INFO: AT2[/dev/ttyACM0]: opening device >>>>> 2011-01-07 13:53:20 [11514] [2] DEBUG: Thread 2 >>>>> (gwlib/http.c:server_thread) >>>>> maps to pid 11514. >>>>> 2011-01-07 13:53:20 [11514] [0] DEBUG: Started thread 6 >>>>> (gw/smsc/smsc_at.c:at2_device_thread) >>>>> 2011-01-07 13:53:20 [11514] [0] DEBUG: Started thread 7 >>>>> (gw/bb_smscconn.c:sms_router) >>>>> 2011-01-07 13:53:20 [11514] [0] INFO: >>>>> ---------------------------------------- >>>>> 2011-01-07 13:53:20 [11514] [0] INFO: Kannel bearerbox II version >>>>> starting >>>>> 2011-01-07 13:53:20 [11514] [0] INFO: Loading store file >>>>> `/etc/kannel/kannel.store' >>>>> 2011-01-07 13:53:20 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: device >>>>> opened. >>>>> Telnet mode = 0 >>>>> 2011-01-07 13:53:20 [11514] [7] DEBUG: Thread 7 >>>>> (gw/bb_smscconn.c:sms_router) maps to pid 11514. >>>>> 2011-01-07 13:53:20 [11514] [0] INFO: Store-file size 0, starting to >>>>> unpack >>>>> 2011-01-07 13:53:20 [11514] [0] INFO: Retrieved 0 messages, >>>>> non-acknowledged >>>>> messages: 0 >>>>> 2011-01-07 13:53:20 [11514] [0] DEBUG: Started thread 8 >>>>> (gw/bb_store_file.c:store_dumper) >>>>> 2011-01-07 13:53:20 [11514] [0] INFO: MAIN: Start-up done, entering >>>>> mainloop >>>>> 2011-01-07 13:53:20 [11514] [0] DEBUG: AT2[/dev/ttyACM0]: start called >>>>> 2011-01-07 13:53:20 [11514] [8] DEBUG: Thread 8 >>>>> (gw/bb_store_file.c:store_dumper) maps to pid 11514. >>>>> 2011-01-07 13:53:20 [11514] [8] DEBUG: Dumping 0 messages to store >>>>> 2011-01-07 13:53:21 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: device opened >>>>> 2011-01-07 13:53:21 [11514] [6] INFO: AT2[/dev/ttyACM0]: Logging in >>>>> 2011-01-07 13:53:21 [11514] [6] INFO: AT2[/dev/ttyACM0]: init device >>>>> 2011-01-07 13:53:21 [11514] [6] INFO: AT2[/dev/ttyACM0]: speed set to >>>>> 115200 >>>>> 2011-01-07 13:53:21 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> ATZ^M >>>>> 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- OK >>>>> 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT^M >>>>> 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- AT >>>>> 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- OK >>>>> 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT&F^M >>>>> 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- AT&F >>>>> 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- OK >>>>> 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> ATE0^M >>>>> 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- ATE0 >>>>> 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- OK >>>>> 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> >>>>> AT+IFC=2,2^M >>>>> 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- OK >>>>> 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> >>>>> AT+CMGF=0^M >>>>> 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- OK >>>>> 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> >>>>> AT+CSMS=?^M >>>>> 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- +CSMS: (0) >>>>> 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- OK >>>>> 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> >>>>> AT+CNMI=1,2,0,1,0^M >>>>> 2011-01-07 13:53:22 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- ERROR >>>>> 2011-01-07 13:53:22 [11514] [6] ERROR: AT2[/dev/ttyACM0]: Generic >>>>> error: >>>>> ERROR >>>>> 2011-01-07 13:53:22 [11514] [6] ERROR: AT2[/dev/ttyACM0]: >>>>> Initialization >>>>> of >>>>> device failed. >>>>> 2011-01-07 13:53:22 [11514] [6] INFO: AT2[/dev/ttyACM0]: Closing device >>>>> 2011-01-07 13:53:23 [11514] [6] ERROR: AT2[/dev/ttyACM0]: Couldn't >>>>> connect >>>>> (retrying in 10 seconds). >>>>> 2011-01-07 13:53:33 [11514] [6] INFO: AT2[/dev/ttyACM0]: opening device >>>>> 2011-01-07 13:53:33 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: device >>>>> opened. >>>>> Telnet mode = 0 >>>>> 2011-01-07 13:53:34 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: device opened >>>>> 2011-01-07 13:53:34 [11514] [6] INFO: AT2[/dev/ttyACM0]: Logging in >>>>> 2011-01-07 13:53:34 [11514] [6] INFO: AT2[/dev/ttyACM0]: init device >>>>> 2011-01-07 13:53:34 [11514] [6] INFO: AT2[/dev/ttyACM0]: speed set to >>>>> 115200 >>>>> 2011-01-07 13:53:34 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> ATZ^M >>>>> 2011-01-07 13:53:34 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- OK >>>>> 2011-01-07 13:53:34 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT^M >>>>> 2011-01-07 13:53:34 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- AT >>>>> 2011-01-07 13:53:34 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- OK >>>>> 2011-01-07 13:53:34 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT&F^M >>>>> 2011-01-07 13:53:35 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- AT&F >>>>> 2011-01-07 13:53:35 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- OK >>>>> 2011-01-07 13:53:35 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> ATE0^M >>>>> 2011-01-07 13:53:35 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- ATE0 >>>>> 2011-01-07 13:53:35 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- OK >>>>> 2011-01-07 13:53:35 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> >>>>> AT+IFC=2,2^M >>>>> 2011-01-07 13:53:35 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- OK >>>>> 2011-01-07 13:53:35 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> >>>>> AT+CMGF=0^M >>>>> 2011-01-07 13:53:35 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- OK >>>>> 2011-01-07 13:53:35 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> >>>>> AT+CSMS=?^M >>>>> 2011-01-07 13:53:35 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- +CSMS: (0) >>>>> 2011-01-07 13:53:35 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- OK >>>>> 2011-01-07 13:53:35 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> >>>>> AT+CNMI=1,2,0,1,0^M >>>>> 2011-01-07 13:53:35 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- ERROR >>>>> 2011-01-07 13:53:35 [11514] [6] ERROR: AT2[/dev/ttyACM0]: Generic >>>>> error: >>>>> ERROR >>>>> 2011-01-07 13:53:35 [11514] [6] ERROR: AT2[/dev/ttyACM0]: >>>>> Initialization >>>>> of >>>>> device failed. >>>>> 2011-01-07 13:53:35 [11514] [6] INFO: AT2[/dev/ttyACM0]: Closing device >>>>> 2011-01-07 13:53:35 [11514] [6] ERROR: AT2[/dev/ttyACM0]: Couldn't >>>>> connect >>>>> (retrying in 10 seconds). >>>>> 2011-01-07 13:53:45 [11514] [6] INFO: AT2[/dev/ttyACM0]: opening device >>>>> 2011-01-07 13:53:45 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: device >>>>> opened. >>>>> Telnet mode = 0 >>>>> 2011-01-07 13:53:46 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: device opened >>>>> 2011-01-07 13:53:46 [11514] [6] INFO: AT2[/dev/ttyACM0]: Logging in >>>>> 2011-01-07 13:53:47 [11514] [6] INFO: AT2[/dev/ttyACM0]: init device >>>>> 2011-01-07 13:53:47 [11514] [6] INFO: AT2[/dev/ttyACM0]: speed set to >>>>> 115200 >>>>> 2011-01-07 13:53:47 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> ATZ^M >>>>> 2011-01-07 13:53:47 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- OK >>>>> 2011-01-07 13:53:47 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT^M >>>>> 2011-01-07 13:53:47 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- AT >>>>> 2011-01-07 13:53:47 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- OK >>>>> 2011-01-07 13:53:47 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT&F^M >>>>> 2011-01-07 13:53:47 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- AT&F >>>>> 2011-01-07 13:53:47 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- OK >>>>> 2011-01-07 13:53:47 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> ATE0^M >>>>> 2011-01-07 13:53:48 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- ATE0 >>>>> 2011-01-07 13:53:48 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- OK >>>>> 2011-01-07 13:53:48 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> >>>>> AT+IFC=2,2^M >>>>> 2011-01-07 13:53:48 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- OK >>>>> 2011-01-07 13:53:48 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> >>>>> AT+CMGF=0^M >>>>> 2011-01-07 13:53:48 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- OK >>>>> 2011-01-07 13:53:48 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> >>>>> AT+CSMS=?^M >>>>> 2011-01-07 13:53:48 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- +CSMS: (0) >>>>> 2011-01-07 13:53:48 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- OK >>>>> 2011-01-07 13:53:48 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> >>>>> AT+CNMI=1,2,0,1,0^M >>>>> 2011-01-07 13:53:48 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- ERROR >>>>> 2011-01-07 13:53:48 [11514] [6] ERROR: AT2[/dev/ttyACM0]: Generic >>>>> error: >>>>> ERROR >>>>> 2011-01-07 13:53:48 [11514] [6] ERROR: AT2[/dev/ttyACM0]: >>>>> Initialization >>>>> of >>>>> device failed. >>>>> 2011-01-07 13:53:48 [11514] [6] INFO: AT2[/dev/ttyACM0]: Closing device >>>>> 2011-01-07 13:53:48 [11514] [6] ERROR: AT2[/dev/ttyACM0]: Couldn't >>>>> connect >>>>> (retrying in 10 seconds). >>>>> ^C2011-01-07 13:53:50 [11514] [0] WARNING: Killing signal or HTTP admin >>>>> command received, shutting down... >>>>> 2011-01-07 13:53:50 [11514] [0] DEBUG: Shutting down Kannel... >>>>> 2011-01-07 13:53:50 [11514] [0] DEBUG: shutting down smsc >>>>> 2011-01-07 13:53:50 [11514] [0] DEBUG: AT2[/dev/ttyACM0]: Shutting down >>>>> SMSCConn, slow >>>>> 2011-01-07 13:53:50 [11514] [0] DEBUG: shutting down udp >>>>> 2011-01-07 13:53:50 [11514] [6] INFO: AT2[/dev/ttyACM0]: opening device >>>>> 2011-01-07 13:53:50 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: device >>>>> opened. >>>>> Telnet mode = 0 >>>>> ^C2011-01-07 13:53:50 [11514] [4] DEBUG: Thread 4 >>>>> (gw/bb_boxc.c:sms_to_smsboxes) terminates. >>>>> 2011-01-07 13:53:50 [11514] [7] DEBUG: Thread 7 >>>>> (gw/bb_smscconn.c:sms_router) terminates. >>>>> 2011-01-07 13:53:50 [11514] [5] DEBUG: Thread 5 >>>>> (gw/bb_boxc.c:smsboxc_run) >>>>> terminates. >>>>> 2011-01-07 13:53:51 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: device opened >>>>> 2011-01-07 13:53:51 [11514] [6] INFO: AT2[/dev/ttyACM0]: Logging in >>>>> 2011-01-07 13:53:52 [11514] [6] INFO: AT2[/dev/ttyACM0]: init device >>>>> 2011-01-07 13:53:52 [11514] [6] INFO: AT2[/dev/ttyACM0]: speed set to >>>>> 115200 >>>>> 2011-01-07 13:53:52 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> ATZ^M >>>>> 2011-01-07 13:53:52 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- OK >>>>> 2011-01-07 13:53:52 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT^M >>>>> 2011-01-07 13:53:52 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- AT >>>>> 2011-01-07 13:53:52 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- OK >>>>> 2011-01-07 13:53:52 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT&F^M >>>>> 2011-01-07 13:53:52 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- AT&F >>>>> 2011-01-07 13:53:52 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- OK >>>>> 2011-01-07 13:53:52 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> ATE0^M >>>>> 2011-01-07 13:53:52 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- ATE0 >>>>> 2011-01-07 13:53:52 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- OK >>>>> 2011-01-07 13:53:52 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> >>>>> AT+IFC=2,2^M >>>>> 2011-01-07 13:53:52 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- OK >>>>> 2011-01-07 13:53:52 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> >>>>> AT+CMGF=0^M >>>>> 2011-01-07 13:53:52 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- OK >>>>> 2011-01-07 13:53:52 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> >>>>> AT+CSMS=?^M >>>>> 2011-01-07 13:53:53 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- +CSMS: (0) >>>>> 2011-01-07 13:53:53 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- OK >>>>> 2011-01-07 13:53:53 [11514] [6] DEBUG: AT2[/dev/ttyACM0]: --> >>>>> AT+CNMI=1,2,0,1,0^M >>>>> 2011-01-07 13:53:53 [11514] [6] DEBUG: AT2[/dev/ttyACM0]:<-- ERROR >>>>> 2011-01-07 13:53:53 [11514] [6] ERROR: AT2[/dev/ttyACM0]: Generic >>>>> error: >>>>> ERROR >>>>> 2011-01-07 13:53:53 [11514] [6] ERROR: AT2[/dev/ttyACM0]: >>>>> Initialization >>>>> of >>>>> device failed. >>>>> 2011-01-07 13:53:53 [11514] [6] INFO: AT2[/dev/ttyACM0]: Closing device >>>>> 2011-01-07 13:53:53 [11514] [6] INFO: AT2[/dev/ttyACM0]: Closing device >>>>> 2011-01-07 13:53:53 [11514] [6] DEBUG: Thread 6 >>>>> (gw/smsc/smsc_at.c:at2_device_thread) terminates. >>>>> 2011-01-07 13:53:53 [11514] [0] INFO: All flow threads have died, >>>>> killing >>>>> core >>>>> 2011-01-07 13:53:53 [11514] [3] DEBUG: HTTP: No clients with requests, >>>>> quitting. >>>>> 2011-01-07 13:53:53 [11514] [3] DEBUG: Thread 3 >>>>> (gw/bb_http.c:httpadmin_run) >>>>> terminates. >>>>> 2011-01-07 13:53:53 [11514] [0] DEBUG: Waiting for 2 >>>>> (gwlib/http.c:server_thread) to terminate >>>>> 2011-01-07 13:53:53 [11514] [2] DEBUG: Thread 2 >>>>> (gwlib/http.c:server_thread) >>>>> terminates. >>>>> 2011-01-07 13:53:53 [11514] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller) >>>>> terminates. >>>>> 2011-01-07 13:53:53 [11514] [0] DEBUG: final clean-up for SMSCConn >>>>> 2011-01-07 13:53:53 [11514] [0] DEBUG: smsbox MO concatenated message >>>>> handling cleaned up >>>>> 2011-01-07 13:53:53 [11514] [8] DEBUG: Dumping 0 messages to store >>>>> 2011-01-07 13:53:53 [11514] [8] DEBUG: Thread 8 >>>>> (gw/bb_store_file.c:store_dumper) terminates. >>>>> 2011-01-07 13:53:53 [11514] [0] INFO: Total WDP messages: received 0, >>>>> sent 0 >>>>> 2011-01-07 13:53:53 [11514] [0] INFO: Total SMS messages: received 0, >>>>> sent 0 >>>>> 2011-01-07 13:53:53 [11514] [0] DEBUG: Immutable octet strings: 233. >>>>> >>>>> It seems that Nokia 6300 cannot doesn't understand the command >>>>> AT+CNMI=1,2,0,1,0^M. >>>>> Could someone help me to fix it ? >>>>> >>> Is it possible to use kannel with nokia 6300 ? If Yes, what could i do ? >>> Thanks. >>> >>> > Thank you > > Alvaro. > > > > -- Mfawa Alfred Onen M.Sc Telecoms, B.Eng Elect/Elect, CCNA, RHCE(in view) System Administrator Department of Computer Science, Bingham University. E-Mail: [email protected] Phone1: +234 805 944 3154 Phone2: +234 803 079 6088
