Hi I am trying to configure kannel but i get this output;
2011-01-10 18:55:24 [4121] [0] INFO: SMS resend retry set to 3. 2011-01-10 18:55:24 [4121] [0] DEBUG: smsbox MO concatenated message handling enabled 2011-01-10 18:55:24 [4121] [0] INFO: DLR rerouting for smsc id <(null)> disabled. 2011-01-10 18:55:24 [4121] [0] INFO: Added logfile `/var/log/kannel/modem.log' with level `0'. 2011-01-10 18:55:24 [4121] [0] INFO: AT2[/dev/ttyUSB0]: configuration shows modemtype <wavecom> 2011-01-10 18:55:24 [4121] [0] DEBUG: AT2[/dev/ttyUSB0]: Reading modem definitions from <kannel.conf> 2011-01-10 18:55:24 [4121] [0] DEBUG: AT2[/dev/ttyUSB0]: Found <1> modems in config 2011-01-10 18:55:24 [4121] [0] INFO: AT2[/dev/ttyUSB0]: read modem definition for <Wavecom> 2011-01-10 18:55:24 [4121] [0] DEBUG: Started thread 6 (gw/smsc/smsc_at.c:at2_device_thread) 2011-01-10 18:55:24 [4121] [6] DEBUG: Thread 6 (gw/smsc/smsc_at.c:at2_device_thread) maps to pid 4121. 2011-01-10 18:55:24 [4121] [6] INFO: Logging thread `6' to logfile `/var/log/kannel/modem.log' with level `0'. 2011-01-10 18:55:24 [4121] [0] DEBUG: Started thread 7 (gw/bb_smscconn.c:sms_router) 2011-01-10 18:55:24 [4121] [7] DEBUG: Thread 7 (gw/bb_smscconn.c:sms_router) maps to pid 4121. 2011-01-10 18:55:24 [4121] [0] INFO: ---------------------------------------- 2011-01-10 18:55:24 [4121] [0] INFO: Kannel bearerbox II version 1.4.3 starting 2011-01-10 18:55:24 [4121] [0] INFO: MAIN: Start-up done, entering mainloop 2011-01-10 18:55:24 [4121] [0] DEBUG: AT2[/dev/ttyUSB0]: start called and when i send any sms it shows like this; 2011-01-10 18:55:24 [4121] [0] INFO: AT2[/dev/ttyUSB0]: configuration shows modemtype <wavecom> 2011-01-10 18:55:24 [4121] [0] DEBUG: AT2[/dev/ttyUSB0]: Reading modem definitions from <kannel.conf> 2011-01-10 18:55:24 [4121] [0] DEBUG: AT2[/dev/ttyUSB0]: Found <1> modems in config 2011-01-10 18:55:24 [4121] [0] INFO: AT2[/dev/ttyUSB0]: read modem definition for <Wavecom> 2011-01-10 18:55:24 [4121] [0] DEBUG: Started thread 6 (gw/smsc/smsc_at.c:at2_device_thread) 2011-01-10 18:55:24 [4121] [6] DEBUG: Thread 6 (gw/smsc/smsc_at.c:at2_device_thread) maps to pid 4121. 2011-01-10 18:55:24 [4121] [6] INFO: Logging thread `6' to logfile `/var/log/kannel/modem.log' with level `0'. 2011-01-10 18:55:24 [4121] [0] DEBUG: Started thread 7 (gw/bb_smscconn.c:sms_router) 2011-01-10 18:55:24 [4121] [7] DEBUG: Thread 7 (gw/bb_smscconn.c:sms_router) maps to pid 4121. 2011-01-10 18:55:24 [4121] [0] INFO: ---------------------------------------- 2011-01-10 18:55:24 [4121] [0] INFO: Kannel bearerbox II version 1.4.3 starting 2011-01-10 18:55:24 [4121] [0] INFO: MAIN: Start-up done, entering mainloop 2011-01-10 18:55:24 [4121] [0] DEBUG: AT2[/dev/ttyUSB0]: start called 2011-01-10 18:57:38 [4121] [5] INFO: Client connected from <127.0.0.1> 2011-01-10 18:57:38 [4121] [5] DEBUG: Started thread 8 (gw/bb_boxc.c:function) 2011-01-10 18:57:38 [4121] [8] DEBUG: Thread 8 (gw/bb_boxc.c:function) maps to pid 4121. 2011-01-10 18:57:38 [4121] [8] DEBUG: Started thread 9 (gw/bb_boxc.c:boxc_sender) 2011-01-10 18:57:38 [4121] [9] DEBUG: Thread 9 (gw/bb_boxc.c:boxc_sender) maps to pid 4121. 2011-01-10 18:57:42 [4121] [8] DEBUG: boxc_receiver: sms received 2011-01-10 18:57:42 [4121] [8] DEBUG: send_msg: sending msg to box: <127.0.0.1> 2011-01-10 18:57:42 [4121] [7] DEBUG: sms_router: handling message (0x8797a08 vs 0x8797a08) 2011-01-10 18:57:42 [4121] [7] DEBUG: Routing failed, re-queued. 2011-01-10 18:57:42 [4121] [7] DEBUG: sms_router: handling message (0x8797a08 vs 0x8797a08) 2011-01-10 18:57:42 [4121] [7] DEBUG: Routing failed, re-queued. 2011-01-10 18:57:42 [4121] [7] DEBUG: sms_router: time to sleep 30.00 secs. 2011-01-10 18:57:42 [4121] [7] DEBUG: sms_router: gwlist_len = 1 2011-01-10 18:57:42 [4121] [7] DEBUG: sms_router: handling message (0x8797a08 vs 0x8797a08) 2011-01-10 18:57:42 [4121] [7] DEBUG: Routing failed, re-queued. 2011-01-10 18:57:42 [4121] [7] DEBUG: sms_router: handling message (0x8797a08 vs 0x8797a08) 2011-01-10 18:57:42 [4121] [7] DEBUG: Routing failed, re-queued. 2011-01-10 18:57:42 [4121] [7] DEBUG: sms_router: time to sleep 30.00 secs. now my configuration file is; #include = /etc/kannel/modems.conf group = core admin-port = 13000 admin-password = admin status-password = status smsbox-port = 13001 box-deny-ip = "*.*.*.*" log-file = /var/log/kannel/bearerbox.log access-log = /var/log/kannel/access-log.log box-allow-ip = "127.0.0.1,192.168.60.213,192.168.60.242,192.168.60.211" log-level = 0 sms-incoming-queue-limit = -1 smsbox-max-pending = 5 sms-resend-freq = 60 sms-resend-retry = 3 #--------------------------------------------- # SMSC CONNECTIONS # # SMSC connections are created in bearerbox and they handle SMSC specific # protocol and message relying. You need these to actually receive and send # messages to handset, but can use GSM modems as virtual SMSCs group = smsc smsc = at modemtype = wavecom device = /dev/ttyUSB0 sms-center = +919442099997 my-number = 09440375777 connect-allow-ip = "127.0.0.1,192.168.60.213,192.168.60.211" speed = 9600 log-file = /var/log/kannel/modem.log log-level = 0 max-error-count = 5 sim-buffering = true #---------------------------------------------------------------------- group = smsbox bearerbox-host = 127.0.0.1 sendsms-port = 13013 global-sender = 09440375777 immediate-sendsms-reply=1 log-file = "/var/log/kannel/smsbox.log" log-level = 0 #--------------------------------------------- # SEND-SMS USERS # # These users are used when Kannel smsbox sendsms interface is used to group = sendsms-user username = cdacbang password = root123 user-allow-ip = "127.0.0.1" #--------------------------------------------- # There should be always a 'default' service. This service is used when no # other 'sms-service' is applied. group = sms-service keyword = default text="the default format is:submit/status usr pwd jobid " catch-all=true #--------------------------------------------- group=sms-service keyword=submit get-url=" http://192.168.60.211:8080/kannel-server/JobResubmitServlet?sender=%p&key=%k&usr=%s&pwd=%s&jobid=%s " catch-all=true accept-x-kannel-headers = true group=sms-service keyword=status get-url=" http://192.168.60.211:8080/kannel-server/StatusServlet?sender=%p&key=%k&usr=%s&pwd=%s&jobid=%s " catch-all=true accept-x-kannel-headers = true group = modems id = wavecom name = Wavecom detect-string = "WAVECOM" init-string = "ATZ" init-string = "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" init-string = "AT+CNMI=1,2,0,0,0" speed = 9600 Thanks in advance Parimal
