what is the content of modem.log? The error is due to the fact kannel can not find a route to deliver the messages; therefore it stores them.
Regards Alvaro |-----------------------------------------------------------------------------------------------------------------| Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier celular y Nextel en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via SMS y GPRS online Visitenos en www.perusms.NET www.smsglobal.com.mx y www.pravcom.com On Mon, Jan 10, 2011 at 8:30 AM, parimal naigaonkar <[email protected]> wrote: > Hi > I am trying to configure kannel but i get this output; > > 2011-01-10 18:55:24 [4121] [0] INFO: SMS resend retry set to 3. > 2011-01-10 18:55:24 [4121] [0] DEBUG: smsbox MO concatenated message > handling enabled > 2011-01-10 18:55:24 [4121] [0] INFO: DLR rerouting for smsc id <(null)> > disabled. > 2011-01-10 18:55:24 [4121] [0] INFO: Added logfile > `/var/log/kannel/modem.log' with level `0'. > 2011-01-10 18:55:24 [4121] [0] INFO: AT2[/dev/ttyUSB0]: configuration shows > modemtype <wavecom> > 2011-01-10 18:55:24 [4121] [0] DEBUG: AT2[/dev/ttyUSB0]: Reading modem > definitions from <kannel.conf> > 2011-01-10 18:55:24 [4121] [0] DEBUG: AT2[/dev/ttyUSB0]: Found <1> modems in > config > 2011-01-10 18:55:24 [4121] [0] INFO: AT2[/dev/ttyUSB0]: read modem > definition for <Wavecom> > 2011-01-10 18:55:24 [4121] [0] DEBUG: Started thread 6 > (gw/smsc/smsc_at.c:at2_device_thread) > 2011-01-10 18:55:24 [4121] [6] DEBUG: Thread 6 > (gw/smsc/smsc_at.c:at2_device_thread) maps to pid 4121. > 2011-01-10 18:55:24 [4121] [6] INFO: Logging thread `6' to logfile > `/var/log/kannel/modem.log' with level `0'. > 2011-01-10 18:55:24 [4121] [0] DEBUG: Started thread 7 > (gw/bb_smscconn.c:sms_router) > 2011-01-10 18:55:24 [4121] [7] DEBUG: Thread 7 (gw/bb_smscconn.c:sms_router) > maps to pid 4121. > 2011-01-10 18:55:24 [4121] [0] INFO: > ---------------------------------------- > 2011-01-10 18:55:24 [4121] [0] INFO: Kannel bearerbox II version 1.4.3 > starting > 2011-01-10 18:55:24 [4121] [0] INFO: MAIN: Start-up done, entering mainloop > 2011-01-10 18:55:24 [4121] [0] DEBUG: AT2[/dev/ttyUSB0]: start called > > and when i send any sms it shows like this; > 2011-01-10 18:55:24 [4121] [0] INFO: AT2[/dev/ttyUSB0]: configuration shows > modemtype <wavecom> > 2011-01-10 18:55:24 [4121] [0] DEBUG: AT2[/dev/ttyUSB0]: Reading modem > definitions from <kannel.conf> > 2011-01-10 18:55:24 [4121] [0] DEBUG: AT2[/dev/ttyUSB0]: Found <1> modems in > config > 2011-01-10 18:55:24 [4121] [0] INFO: AT2[/dev/ttyUSB0]: read modem > definition for <Wavecom> > 2011-01-10 18:55:24 [4121] [0] DEBUG: Started thread 6 > (gw/smsc/smsc_at.c:at2_device_thread) > 2011-01-10 18:55:24 [4121] [6] DEBUG: Thread 6 > (gw/smsc/smsc_at.c:at2_device_thread) maps to pid 4121. > 2011-01-10 18:55:24 [4121] [6] INFO: Logging thread `6' to logfile > `/var/log/kannel/modem.log' with level `0'. > 2011-01-10 18:55:24 [4121] [0] DEBUG: Started thread 7 > (gw/bb_smscconn.c:sms_router) > 2011-01-10 18:55:24 [4121] [7] DEBUG: Thread 7 (gw/bb_smscconn.c:sms_router) > maps to pid 4121. > 2011-01-10 18:55:24 [4121] [0] INFO: > ---------------------------------------- > 2011-01-10 18:55:24 [4121] [0] INFO: Kannel bearerbox II version 1.4.3 > starting > 2011-01-10 18:55:24 [4121] [0] INFO: MAIN: Start-up done, entering mainloop > 2011-01-10 18:55:24 [4121] [0] DEBUG: AT2[/dev/ttyUSB0]: start called > 2011-01-10 18:57:38 [4121] [5] INFO: Client connected from <127.0.0.1> > 2011-01-10 18:57:38 [4121] [5] DEBUG: Started thread 8 > (gw/bb_boxc.c:function) > 2011-01-10 18:57:38 [4121] [8] DEBUG: Thread 8 (gw/bb_boxc.c:function) maps > to pid 4121. > 2011-01-10 18:57:38 [4121] [8] DEBUG: Started thread 9 > (gw/bb_boxc.c:boxc_sender) > 2011-01-10 18:57:38 [4121] [9] DEBUG: Thread 9 (gw/bb_boxc.c:boxc_sender) > maps to pid 4121. > 2011-01-10 18:57:42 [4121] [8] DEBUG: boxc_receiver: sms received > 2011-01-10 18:57:42 [4121] [8] DEBUG: send_msg: sending msg to box: > <127.0.0.1> > 2011-01-10 18:57:42 [4121] [7] DEBUG: sms_router: handling message > (0x8797a08 vs 0x8797a08) > 2011-01-10 18:57:42 [4121] [7] DEBUG: Routing failed, re-queued. > 2011-01-10 18:57:42 [4121] [7] DEBUG: sms_router: handling message > (0x8797a08 vs 0x8797a08) > 2011-01-10 18:57:42 [4121] [7] DEBUG: Routing failed, re-queued. > 2011-01-10 18:57:42 [4121] [7] DEBUG: sms_router: time to sleep 30.00 secs. > 2011-01-10 18:57:42 [4121] [7] DEBUG: sms_router: gwlist_len = 1 > 2011-01-10 18:57:42 [4121] [7] DEBUG: sms_router: handling message > (0x8797a08 vs 0x8797a08) > 2011-01-10 18:57:42 [4121] [7] DEBUG: Routing failed, re-queued. > 2011-01-10 18:57:42 [4121] [7] DEBUG: sms_router: handling message > (0x8797a08 vs 0x8797a08) > 2011-01-10 18:57:42 [4121] [7] DEBUG: Routing failed, re-queued. > 2011-01-10 18:57:42 [4121] [7] DEBUG: sms_router: time to sleep 30.00 secs. > > > > now my configuration file is; > #include = /etc/kannel/modems.conf > group = core > admin-port = 13000 > admin-password = admin > status-password = status > smsbox-port = 13001 > box-deny-ip = "*.*.*.*" > log-file = /var/log/kannel/bearerbox.log > access-log = /var/log/kannel/access-log.log > box-allow-ip = "127.0.0.1,192.168.60.213,192.168.60.242,192.168.60.211" > log-level = 0 > sms-incoming-queue-limit = -1 > smsbox-max-pending = 5 > sms-resend-freq = 60 > sms-resend-retry = 3 > #--------------------------------------------- > # SMSC CONNECTIONS > # > # SMSC connections are created in bearerbox and they handle SMSC specific > # protocol and message relying. You need these to actually receive and send > # messages to handset, but can use GSM modems as virtual SMSCs > group = smsc > smsc = at > modemtype = wavecom > device = /dev/ttyUSB0 > sms-center = +919442099997 > my-number = 09440375777 > connect-allow-ip = "127.0.0.1,192.168.60.213,192.168.60.211" > speed = 9600 > log-file = /var/log/kannel/modem.log > log-level = 0 > max-error-count = 5 > sim-buffering = true > #---------------------------------------------------------------------- > group = smsbox > bearerbox-host = 127.0.0.1 > sendsms-port = 13013 > global-sender = 09440375777 > immediate-sendsms-reply=1 > log-file = "/var/log/kannel/smsbox.log" > log-level = 0 > #--------------------------------------------- > # SEND-SMS USERS > # > # These users are used when Kannel smsbox sendsms interface is used to > group = sendsms-user > username = cdacbang > password = root123 > user-allow-ip = "127.0.0.1" > #--------------------------------------------- > # There should be always a 'default' service. This service is used when no > # other 'sms-service' is applied. > group = sms-service > keyword = default > text="the default format is:submit/status usr pwd jobid " > catch-all=true > #--------------------------------------------- > group=sms-service > keyword=submit > get-url="http://192.168.60.211:8080/kannel-server/JobResubmitServlet?sender=%p&key=%k&usr=%s&pwd=%s&jobid=%s"; > catch-all=true > accept-x-kannel-headers = true > group=sms-service > keyword=status > get-url="http://192.168.60.211:8080/kannel-server/StatusServlet?sender=%p&key=%k&usr=%s&pwd=%s&jobid=%s"; > catch-all=true > accept-x-kannel-headers = true > group = modems > id = wavecom > name = Wavecom > detect-string = "WAVECOM" > init-string = "ATZ" > init-string = "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" > init-string = "AT+CNMI=1,2,0,0,0" > speed = 9600 > > Thanks in advance > Parimal
