Emmanuel, Thanks for your reply.
I have tried minicom again. I confirm that this phone, Nokia E72, doesn't support CNMI. I played with the commands for a while, it seems that the phone do not allow AT command to access any of it's memories. Any operations, receiving a SMS, sending SMS from memory will fail. However, sending sms command will success. I have to get another phone. thanks a lot! Helen --- On Wed, 1/12/11, Emmanuel CHANSON <[email protected]> wrote: From: Emmanuel CHANSON <[email protected]> Subject: Re: Kannel do not receive SMS To: "Helen Sang" <[email protected]> Cc: [email protected] Date: Wednesday, January 12, 2011, 5:54 PM Is your phone able to use AT+CNMI command using minicom ? AT+CNMI? If ERROR then your phone won't be able to forward SMS to kannel BR Emmanuel 2011/1/12 Helen Sang <[email protected]> Dear Kannel users, I connect a Nokia E72 phone to my Fedora 7 box with a usb cable. The port is ttyACM0. mod for the device is changed to 666 with command chmod 666 ttyACM0 The setup is fine to send out SMS. When there is SMS being sent out, I can see the signal interaction in smsbox and bearer box. However, when the E72 received a SMS, bearer box has no action. It's as if no event happens. I have read users mail archives. Somebody has this problem before, but with a different phone model. The suggest given to him is to use minicom to check the phone AT command spec. I had tried minicom. But in minicom, the phone answer OK to AT^M and ERROR to all other queries. Frankly I don't understand much of it. Here is my modem.conf that I config the nokiaphone: group = modems id = nokiaphone name = "Nokia Phone" detect-string = "Nokia Mobile Phone" need-sleep = true keepalive-cmd = "AT+CBC;+CSQ" enable-mms = true # detect-string = "MODEM" # detect-string2 = "" [Default] init-string = "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" # init-string = "AT+CNMI=1,2,0,1,0;+CMEE=1" speed = 9600 # enable-hwhs = "AT+IFC=2,2" [Default] # need-sleep = false [Default] # no-pin = false [Default] # no-smsc = false [Default] # sendline-sleep = 100 [Default, miliseconds] # keepalive-cmd = "AT" [Default] # broken = false [Default] # message-storage = "SM" # enable-mms = false [Default] The init-string was directly copied from wvdial. I've stuck here for a week. Please someone help. thanks and regards.
