Hi, I tried it, but still I have problem. Now I get from log this information:
2011-01-28 11:27:27 [24871] [6] INFO: AT2[/dev/ttyS0]: init device 2011-01-28 11:27:27 [24871] [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 2011-01-28 11:27:27 [24871] [6] DEBUG: AT2[/dev/ttyS0]: --> ATZ^M 2011-01-28 11:27:28 [24871] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK 2011-01-28 11:27:28 [24871] [6] DEBUG: AT2[/dev/ttyS0]: --> AT^M 2011-01-28 11:27:29 [24871] [6] DEBUG: AT2[/dev/ttyS0]: <-- AT 2011-01-28 11:27:29 [24871] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK 2011-01-28 11:27:29 [24871] [6] DEBUG: AT2[/dev/ttyS0]: --> AT&F^M 2011-01-28 11:27:29 [24871] [6] DEBUG: AT2[/dev/ttyS0]: <-- AT&F 2011-01-28 11:27:29 [24871] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK 2011-01-28 11:27:29 [24871] [6] DEBUG: AT2[/dev/ttyS0]: --> ATE0^M 2011-01-28 11:27:29 [24871] [6] DEBUG: AT2[/dev/ttyS0]: <-- ATE0 2011-01-28 11:27:29 [24871] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK 2011-01-28 11:27:29 [24871] [6] DEBUG: AT2[/dev/ttyS0]: --> AT+IFC=2,2^M 2011-01-28 11:27:29 [24871] [6] DEBUG: AT2[/dev/ttyS0]: <-- ERROR 2011-01-28 11:27:29 [24871] [6] ERROR: AT2[/dev/ttyS0]: Generic error: ERROR 2011-01-28 11:27:29 [24871] [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake 2011-01-28 11:27:29 [24871] [6] DEBUG: AT2[/dev/ttyS0]: --> AT+CMGF=0^M 2011-01-28 11:27:30 [24871] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK 2011-01-28 11:27:30 [24871] [6] DEBUG: AT2[/dev/ttyS0]: --> AT+CSMS=?^M 2011-01-28 11:27:30 [24871] [6] DEBUG: AT2[/dev/ttyS0]: <-- +CSMS: (0,1) 2011-01-28 11:27:36 [24871] [6] DEBUG: AT2[/dev/ttyS0]: --> AT+CNMI=1,2,0,1,1^M 2011-01-28 11:27:36 [24871] [6] DEBUG: AT2[/dev/ttyS0]: <-- ERROR 2011-01-28 11:27:36 [24871] [6] ERROR: AT2[/dev/ttyS0]: Generic error: ERROR 2011-01-28 11:27:36 [24871] [6] ERROR: AT2[/dev/ttyS0]: Initialization of device failed. Attempt #0 on -1 max. 2011-01-28 11:27:36 [24871] [6] INFO: AT2[/dev/ttyS0]: Closing device 2011-01-28 11:27:36 [24871] [6] ERROR: AT2[/dev/ttyS0]: Couldn't connect (retrying in 10 seconds). Kannel add to end init-string ^M - is it ok? Dne 28. ledna 2011 11:14 <[email protected]> napsal(a): > Jan, > > Here's the configuration that works for me with the MC35i: > > group = smsc > smsc = at > modemtype = siemens_mc35i > device = /dev/ttyS1 > pin = **** > > group = modems > id = siemens_mc35i > detect-string = "MC35i" > speed = 9600 > > init-string = "AT+CNMI=1,2,0,1,1" > > > Regards, > Stefan > > > > Von: Jan Šimecký <[email protected]> > An: [email protected] > Datum: 28.01.2011 08:52 > Betreff: Fwd: Siemens MC35i : Couldn't connect > Gesendet von: [email protected] > ------------------------------ > > > > Hello, > > I tried configured kannel for siemens mc35i. Here is my configuration in > smskannel.conf: > > # SMSC CONNECTIONS > group = smsc > smsc = at > modemtype = auto > device = /dev/ttyS0 > speed = 115200 > port = 10050 > connect-allow-ip = 127.0.0.1 > log-file = "/home/simi/gateway/at.log" > > ... > > # SIEMENS MODEM SETUP > group = modems > id = SIEMENS MC35i > name = "siemens_ mc35i" > detect-string = "SIEMENS" > detect-string2 = "MC35i" > init-string = "AT+CNMI=1,2,0,1,1" > enable-hwhs = "AT\\Q3" > need-sleep = true > > > And here is record from /home/simi/gateway/at.log > > 2011-01-28 08:32:35 [4041] [6] DEBUG: AT2[/dev/ttyS0]: detecting modem type > > 2011-01-28 08:32:35 [4041] [6] INFO: AT2[/dev/ttyS0]: opening device > > 2011-01-28 08:32:35 [4041] [6] DEBUG: AT2[/dev/ttyS0]: device opened. > Telnet mode = 0 > 2011-01-28 08:32:36 [4041] [6] DEBUG: AT2[/dev/ttyS0]: device opened > > 2011-01-28 08:32:36 [4041] [6] INFO: AT2[/dev/ttyS0]: speed set to 115200 > > 2011-01-28 08:32:36 [4041] [6] DEBUG: AT2[/dev/ttyS0]: --> ^M > > 2011-01-28 08:32:38 [4041] [6] DEBUG: AT2[/dev/ttyS0]: --> AT^M > > 2011-01-28 08:32:38 [4041] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK > > 2011-01-28 08:32:38 [4041] [6] DEBUG: AT2[/dev/ttyS0]: --> AT&F^M > > 2011-01-28 08:32:39 [4041] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK > > 2011-01-28 08:32:39 [4041] [6] DEBUG: AT2[/dev/ttyS0]: --> ATE0^M > > 2011-01-28 08:32:39 [4041] [6] DEBUG: AT2[/dev/ttyS0]: <-- ATE0 > > 2011-01-28 08:32:39 [4041] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK > > 2011-01-28 08:32:39 [4041] [6] DEBUG: AT2[/dev/ttyS0]: --> ATI^M > > 2011-01-28 08:32:40 [4041] [6] DEBUG: AT2[/dev/ttyS0]: <-- SIEMENS > > 2011-01-28 08:32:43 [4041] [6] ERROR: AT2[/dev/ttyS0]: Couldn't connect > (retrying in 10 seconds). > 2011-01-28 08:32:53 [4041] [6] DEBUG: AT2[/dev/ttyS0]: detecting modem type > > 2011-01-28 08:32:53 [4041] [6] INFO: AT2[/dev/ttyS0]: opening device > 2011-01-28 08:32:53 [4041] [6] WARNING: AT2[/dev/ttyS0]: trying to open > device with not closed device!!! Please report!!! > 2011-01-28 08:32:53 [4041] [6] INFO: AT2[/dev/ttyS0]: Closing device > 2011-01-28 08:32:53 [4041] [6] DEBUG: AT2[/dev/ttyS0]: device opened. > Telnet mode = 0 > > If I try open /dev/ttyS0 over serial terminal and I send command ATI^M I > get successfull first line with SIEMENS and second line with MC35i. So Any > idea why cannel here failed? > > > Thanks. Jan Simecky > > > > ------ > Der Inhalt dieses E-Mails ist streng vertraulich und möglicherweise > gesetzlich besonders geschützt. Dieses E-Mail ist nur für den Adressaten > bestimmt. Wenn Sie nicht der beabsichtigte Empfänger sind, ist es Ihnen > nicht gestattet und stellt möglicherweise einen Gesetzesverstoss dar, dieses > E-Mail zu kopieren, zu verbreiten oder anderweitig zu verwenden. In diesem > Fall sollten Sie uns so schnell wie möglich benachrichtigen und dieses > E-Mail löschen. > > Le contenu de ce courriel est strictement confidentiel et probablement > légalement protégé. Il n'est adressé qu'aux destinataires mentionnés. Si > vous n'en faites pas partie, vous n'avez pas l'autorisation de le copier, ni > de le diffuser, ni même de le destiner à un autre usage - ce qui dans chaque > cas peut en effet constituer une infraction à la loi. Dans ce cas, vous > devriez nous en informer immédiatement et effacer ce courriel. > > Il contenuto del presente messaggio elettronico è da considerare di massima > riservatezza e possibilmente è protetto in modo particolare dalla legge. La > presente e-mail è riservata alla sola attenzione della persona destinataria. > Se lei non è la persona che avrebbe dovuto ricevere la e-mail, non le è > permesso e possibilmente rappresenta una violazione della legge, copiare la > presente e-mail, diffonderla o utilizzarla in qualsiasi altro modo. In > questo caso lei dovrebbe informarci al più presto possibile e cancellare la > presente e-mail. >
