I don't use this configuration anymore, so I checked some of my old logs. I also get the first error after AT+IFC=2,2^M. But right after that I set the pin with CPIN and then the rest - including the initialization - worked fine.
You're sure you setting the pin correct? Stefan Von: Jan Šimecký <[email protected]> An: [email protected] Kopie: "Jan ??imeck?? <[email protected], [email protected], [email protected] Datum: 28.01.2011 11:37 Betreff: Re: Fwd: Siemens MC35i : Couldn't connect Gesendet von: [email protected] Hi, I tried it, but still I have problem. Now I get from log this information: 2011-01-28 11:27:27 [24871] [6] INFO: AT2[/dev/ttyS0]: init device 2011-01-28 11:27:27 [24871] [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 2011-01-28 11:27:27 [24871] [6] DEBUG: AT2[/dev/ttyS0]: --> ATZ^M 2011-01-28 11:27:28 [24871] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK 2011-01-28 11:27:28 [24871] [6] DEBUG: AT2[/dev/ttyS0]: --> AT^M 2011-01-28 11:27:29 [24871] [6] DEBUG: AT2[/dev/ttyS0]: <-- AT 2011-01-28 11:27:29 [24871] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK 2011-01-28 11:27:29 [24871] [6] DEBUG: AT2[/dev/ttyS0]: --> AT&F^M 2011-01-28 11:27:29 [24871] [6] DEBUG: AT2[/dev/ttyS0]: <-- AT&F 2011-01-28 11:27:29 [24871] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK 2011-01-28 11:27:29 [24871] [6] DEBUG: AT2[/dev/ttyS0]: --> ATE0^M 2011-01-28 11:27:29 [24871] [6] DEBUG: AT2[/dev/ttyS0]: <-- ATE0 2011-01-28 11:27:29 [24871] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK 2011-01-28 11:27:29 [24871] [6] DEBUG: AT2[/dev/ttyS0]: --> AT+IFC=2,2^M 2011-01-28 11:27:29 [24871] [6] DEBUG: AT2[/dev/ttyS0]: <-- ERROR 2011-01-28 11:27:29 [24871] [6] ERROR: AT2[/dev/ttyS0]: Generic error: ERROR 2011-01-28 11:27:29 [24871] [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake 2011-01-28 11:27:29 [24871] [6] DEBUG: AT2[/dev/ttyS0]: --> AT+CMGF=0^M 2011-01-28 11:27:30 [24871] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK 2011-01-28 11:27:30 [24871] [6] DEBUG: AT2[/dev/ttyS0]: --> AT+CSMS=?^M 2011-01-28 11:27:30 [24871] [6] DEBUG: AT2[/dev/ttyS0]: <-- +CSMS: (0,1) 2011-01-28 11:27:36 [24871] [6] DEBUG: AT2[/dev/ttyS0]: --> AT+CNMI=1,2,0,1,1^M 2011-01-28 11:27:36 [24871] [6] DEBUG: AT2[/dev/ttyS0]: <-- ERROR 2011-01-28 11:27:36 [24871] [6] ERROR: AT2[/dev/ttyS0]: Generic error: ERROR 2011-01-28 11:27:36 [24871] [6] ERROR: AT2[/dev/ttyS0]: Initialization of device failed. Attempt #0 on -1 max. 2011-01-28 11:27:36 [24871] [6] INFO: AT2[/dev/ttyS0]: Closing device 2011-01-28 11:27:36 [24871] [6] ERROR: AT2[/dev/ttyS0]: Couldn't connect (retrying in 10 seconds). Kannel add to end init-string ^M - is it ok? Dne 28. ledna 2011 11:14 <[email protected]> napsal(a): Jan, Here's the configuration that works for me with the MC35i: group = smsc smsc = at modemtype = siemens_mc35i device = /dev/ttyS1 pin = **** group = modems id = siemens_mc35i detect-string = "MC35i" speed = 9600 init-string = "AT+CNMI=1,2,0,1,1" Regards, Stefan Von: Jan Šimecký <[email protected]> An: [email protected] Datum: 28.01.2011 08:52 Betreff: Fwd: Siemens MC35i : Couldn't connect Gesendet von: [email protected] Hello, I tried configured kannel for siemens mc35i. Here is my configuration in smskannel.conf: # SMSC CONNECTIONS group = smsc smsc = at modemtype = auto device = /dev/ttyS0 speed = 115200 port = 10050 connect-allow-ip = 127.0.0.1 log-file = "/home/simi/gateway/at.log" ... # SIEMENS MODEM SETUP group = modems id = SIEMENS MC35i name = "siemens_ mc35i" detect-string = "SIEMENS" detect-string2 = "MC35i" init-string = "AT+CNMI=1,2,0,1,1" enable-hwhs = "AT\\Q3" need-sleep = true And here is record from /home/simi/gateway/at.log 2011-01-28 08:32:35 [4041] [6] DEBUG: AT2[/dev/ttyS0]: detecting modem type 2011-01-28 08:32:35 [4041] [6] INFO: AT2[/dev/ttyS0]: opening device 2011-01-28 08:32:35 [4041] [6] DEBUG: AT2[/dev/ttyS0]: device opened. Telnet mode = 0 2011-01-28 08:32:36 [4041] [6] DEBUG: AT2[/dev/ttyS0]: device opened 2011-01-28 08:32:36 [4041] [6] INFO: AT2[/dev/ttyS0]: speed set to 115200 2011-01-28 08:32:36 [4041] [6] DEBUG: AT2[/dev/ttyS0]: --> ^M 2011-01-28 08:32:38 [4041] [6] DEBUG: AT2[/dev/ttyS0]: --> AT^M 2011-01-28 08:32:38 [4041] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK 2011-01-28 08:32:38 [4041] [6] DEBUG: AT2[/dev/ttyS0]: --> AT&F^M 2011-01-28 08:32:39 [4041] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK 2011-01-28 08:32:39 [4041] [6] DEBUG: AT2[/dev/ttyS0]: --> ATE0^M 2011-01-28 08:32:39 [4041] [6] DEBUG: AT2[/dev/ttyS0]: <-- ATE0 2011-01-28 08:32:39 [4041] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK 2011-01-28 08:32:39 [4041] [6] DEBUG: AT2[/dev/ttyS0]: --> ATI^M 2011-01-28 08:32:40 [4041] [6] DEBUG: AT2[/dev/ttyS0]: <-- SIEMENS 2011-01-28 08:32:43 [4041] [6] ERROR: AT2[/dev/ttyS0]: Couldn't connect (retrying in 10 seconds). 2011-01-28 08:32:53 [4041] [6] DEBUG: AT2[/dev/ttyS0]: detecting modem type 2011-01-28 08:32:53 [4041] [6] INFO: AT2[/dev/ttyS0]: opening device 2011-01-28 08:32:53 [4041] [6] WARNING: AT2[/dev/ttyS0]: trying to open device with not closed device!!! Please report!!! 2011-01-28 08:32:53 [4041] [6] INFO: AT2[/dev/ttyS0]: Closing device 2011-01-28 08:32:53 [4041] [6] DEBUG: AT2[/dev/ttyS0]: device opened. Telnet mode = 0 If I try open /dev/ttyS0 over serial terminal and I send command ATI^M I get successfull first line with SIEMENS and second line with MC35i. So Any idea why cannel here failed? Thanks. Jan Simecky ------ Der Inhalt dieses E-Mails ist streng vertraulich und möglicherweise gesetzlich besonders geschützt. Dieses E-Mail ist nur für den Adressaten bestimmt. Wenn Sie nicht der beabsichtigte Empfänger sind, ist es Ihnen nicht gestattet und stellt möglicherweise einen Gesetzesverstoss dar, dieses E-Mail zu kopieren, zu verbreiten oder anderweitig zu verwenden. In diesem Fall sollten Sie uns so schnell wie möglich benachrichtigen und dieses E-Mail löschen. Le contenu de ce courriel est strictement confidentiel et probablement légalement protégé. Il n'est adressé qu'aux destinataires mentionnés. Si vous n'en faites pas partie, vous n'avez pas l'autorisation de le copier, ni de le diffuser, ni même de le destiner à un autre usage - ce qui dans chaque cas peut en effet constituer une infraction à la loi. Dans ce cas, vous devriez nous en informer immédiatement et effacer ce courriel. Il contenuto del presente messaggio elettronico è da considerare di massima riservatezza e possibilmente è protetto in modo particolare dalla legge. La presente e-mail è riservata alla sola attenzione della persona destinataria. Se lei non è la persona che avrebbe dovuto ricevere la e-mail, non le è permesso e possibilmente rappresenta una violazione della legge, copiare la presente e-mail, diffonderla o utilizzarla in qualsiasi altro modo. In questo caso lei dovrebbe informarci al più presto possibile e cancellare la presente e-mail. ------ Der Inhalt dieses E-Mails ist streng vertraulich und möglicherweise gesetzlich besonders geschützt. Dieses E-Mail ist nur für den Adressaten bestimmt. Wenn Sie nicht der beabsichtigte Empfänger sind, ist es Ihnen nicht gestattet und stellt möglicherweise einen Gesetzesverstoss dar, dieses E-Mail zu kopieren, zu verbreiten oder anderweitig zu verwenden. In diesem Fall sollten Sie uns so schnell wie möglich benachrichtigen und dieses E-Mail löschen. Le contenu de ce courriel est strictement confidentiel et probablement légalement protégé. Il n'est adressé qu'aux destinataires mentionnés. Si vous n'en faites pas partie, vous n'avez pas l'autorisation de le copier, ni de le diffuser, ni même de le destiner à un autre usage - ce qui dans chaque cas peut en effet constituer une infraction à la loi. Dans ce cas, vous devriez nous en informer immédiatement et effacer ce courriel. Il contenuto del presente messaggio elettronico è da considerare di massima riservatezza e possibilmente è protetto in modo particolare dalla legge. La presente e-mail è riservata alla sola attenzione della persona destinataria. Se lei non è la persona che avrebbe dovuto ricevere la e-mail, non le è permesso e possibilmente rappresenta una violazione della legge, copiare la presente e-mail, diffonderla o utilizzarla in qualsiasi altro modo. In questo caso lei dovrebbe informarci al più presto possibile e cancellare la presente e-mail.
