I'm trying to configure Kannel(client) and openSMPPbox with separate RX and TX but now I'm having problems wih the DLR's.. Although It works fine for me in transceiver mode, but I need to reproduce an issue and provide support to a smpp client which requires separate TX and RX).
This is the Kannel-client configuration: group = smsc smsc = smpp smsc-id = TXsmsc port = 2346 receive-port = 0 *# ...and other parameters which works fine with opensmppbox in transceiver mode...* group = smsc smsc = smpp smsc-id = RXsmsc port = 0 receive-port = 2346 *# ...and other parameters which works fine with opensmppbox in transceiver mode...* With this setup, the status page http://server:13000/status shows both the TX and RX connections, but, when I submit a test SMS, this what happens: 1. the TX connection shows: "sent:1 " and "dlr: 1" 2. and nothing in the RX connection: "sent:0" and "dlr:0" 3. the kannel-server status-page shows that there is another DLR in queue, which is not received by the kannel-client, and the kannel-server log it shows this error: *2011-03-07 16:52:13 [31712] [9] ERROR: SMPP: Unknown TLV `dlr_err', don't send.* (note: In transceiver mode both the DLR's are being received correctly by the kannel-client) In separate TX and RX connections I would expect this in the kannel-client status page: 1. the TX connection shows: "sent:1 " and "dlr: 0" 2. and nothing in the RX connection: "sent:0" and "dlr:2" Any idea why TX is receiving 1 DLR even with receive-port = 0? Any idea why the 2nd DLR is not reaching the RX connection? Thanks again for your help! Didac On Sun, Mar 6, 2011 at 1:25 PM, Dídac Royo <[email protected]> wrote: > Now I understand how it works. Thanks Rene > > > On Sun, Mar 6, 2011 at 4:05 AM, Rene Kluwen <[email protected]> wrote: > >> Separate tx and rx connections cannot be configured independently. They >> share the same settings (e.g. port number, credentials, etc.)… >> >> >> >> == Rene >> >> >> >> *From:* Dídac Royo [mailto:[email protected]] >> *Sent:* Saturday, 05 March, 2011 10:09 >> *To:* Rene Kluwen >> *Cc:* [email protected] >> *Subject:* Re: OpenSMPPbox does support sepatate TX and RX conenctions >> (or only tranceiver mode is supported) ? >> >> >> >> Hi, >> >> Thanks René for your quick answer. >> >> I've read this guide: http://www.chimit.nl/kannel/userguide.pdf >> and searched around, but I couldn't find how to configure separate TX and >> RX... >> >> Can you please explain how to configure OpenSMPPbox with separate TX and >> RX? >> I only know how to connet smppclients to opensmppbox in transceiver mode. >> >> Thanks >> >> Dídac >> >> On Fri, Mar 4, 2011 at 8:59 PM, Rene Kluwen <[email protected]> >> wrote: >> >> The short answer: Yes, it supports separate TX and RX connections. >> >> >> >> == Rene >> >> >> >> *From:* [email protected] [mailto:[email protected]] *On >> Behalf Of *Dídac Royo >> *Sent:* Friday, 04 March, 2011 18:34 >> *To:* [email protected] >> *Subject:* OpenSMPPbox does support sepatate TX and RX conenctions (or >> only tranceiver mode is supported) ? >> >> >> >> Hi All, >> >> Does OpenSMPPbox support sepatate TX and RX conenctions? >> or only tranceiver mode is supported ? >> >> Thanks for your help! >> >> Dídac >> >> >> > >
