Thanks for reply Rene, I has read about the permission issue on /dev/ttyUSB0. I have given chmod 777 permission to /dev/ttyUSB0. I am able to access the modem over same port using minicom without any issues. If this permission is not proper, what else permissions i need to give?
Cheers, Sudhakar Rene Kluwen wrote: > > Are you sure minicom responds when you enter /dev/ttyUSB0? > If yes, maybe it's a permission issue. > > -----Original Message----- > From: [email protected] [mailto:[email protected]] > On > Behalf Of sudhakar_yg > Sent: Wednesday, 12 September, 2012 09:48 > To: [email protected] > Subject: Kannel With SIM300 GSM Modem > > > Hi, > I am setting up the kannel over simcom GSM modem. Attached is my > configuration file. > http://old.nabble.com/file/p34422189/simcom.conf simcom.conf When I try to > bring up my bearerbox & monitor the SMPP log, Following are my SMPP & > Kannel > log, > ---------------------------------------------------------------------------- > ---------------------------------- > SMPP LOG > ---------------------------------------------------------------------------- > ---------------------------------- > 2012-09-12 01:05:16 [8841] [6] DEBUG: AT2[gsm]: detecting modem speed. > 2012-09-12 01:05:16 [8841] [6] INFO: AT2[gsm]: opening device > 2012-09-12 01:05:16 [8841] [6] DEBUG: AT2[gsm]: device opened. Telnet mode > = > 0 > 2012-09-12 01:05:17 [8841] [6] DEBUG: AT2[gsm]: device opened > 2012-09-12 01:05:17 [8841] [6] INFO: AT2[gsm]: speed set to 115200 > 2012-09-12 01:05:17 [8841] [6] DEBUG: AT2[gsm]: --> ^M > 2012-09-12 01:05:19 [8841] [6] DEBUG: AT2[gsm]: --> AT^M > 2012-09-12 01:05:25 [8841] [6] DEBUG: AT2[gsm]: --> AT^M > 2012-09-12 01:05:31 [8841] [6] DEBUG: AT2[gsm]: --> AT^M > > ---------------------------------------------------------------------------- > ----------------------------------- > Kannel Log > ---------------------------------------------------------------------------- > ---------------------------------- > sudhakar@5DMark-II:~/kannel/sbin$ bearerbox ../config/simcom.conf > 2012-09-12 12:55:42 [14593] [0] INFO: Debug_lvl = -1, log_file = <none>, > log_lvl = 0 > 2012-09-12 12:55:42 [14593] [0] WARNING: DLR: using default 'internal' for > storage type. > 2012-09-12 12:55:42 [14593] [0] INFO: DLR using storage type: internal > 2012-09-12 12:55:42 [14593] [0] DEBUG: Kannel bearerbox version > `svn-r4910M'. > Build `Sep 6 2012 09:22:08', compiler `4.6.3'. > System Linux, release 3.2.0-29-generic-pae, version #46-Ubuntu SMP Fri Jul > 27 17:25:43 UTC 2012, machine i686. > Hostname 5DMark-II, IP 127.0.1.1. > Libxml version 2.7.8. > Compiled with MySQL 5.5.24, using MySQL 5.5.24. > Using native malloc. > > 2012-09-12 12:55:42 [14593] [0] INFO: Added logfile > `/home/sudhakar/kannel/logs/kannel.log' with level `0'. > 2012-09-12 12:55:42 [14593] [0] INFO: Started access logfile > `/home/sudhakar/kannel/logs/access.log'. > 2012-09-12 12:55:42 [14593] [0] INFO: SSL not supported, no SSL > initialization done. > 2012-09-12 12:55:42 [14593] [0] INFO: HTTP: Opening server at port 13000. > 2012-09-12 12:55:42 [14593] [0] DEBUG: Started thread 1 > (gwlib/fdset.c:poller) > 2012-09-12 12:55:42 [14593] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller) > maps > to pid 14593. > 2012-09-12 12:55:42 [14593] [0] DEBUG: Started thread 2 > (gwlib/http.c:server_thread) > 2012-09-12 12:55:42 [14593] [0] DEBUG: Started thread 3 > (gw/bb_http.c:httpadmin_run) > 2012-09-12 12:55:42 [14593] [0] DEBUG: starting smsbox connection module > 2012-09-12 12:55:42 [14593] [0] INFO: BOXC: 'smsbox-max-pending' not set, > using default (100). > 2012-09-12 12:55:42 [14593] [0] DEBUG: Adding smsbox routing to id > <smsbox> > for smsc id <gsm> > 2012-09-12 12:55:42 [14593] [0] DEBUG: Started thread 4 > (gw/bb_boxc.c:sms_to_smsboxes) > 2012-09-12 12:55:42 [14593] [4] DEBUG: Thread 4 > (gw/bb_boxc.c:sms_to_smsboxes) maps to pid 14593. > 2012-09-12 12:55:42 [14593] [0] DEBUG: Started thread 5 > (gw/bb_boxc.c:smsboxc_run) > 2012-09-12 12:55:42 [14593] [0] INFO: Set SMS resend frequency to 60 > seconds. > 2012-09-12 12:55:42 [14593] [0] INFO: SMS resend retry set to unlimited. > 2012-09-12 12:55:42 [14593] [0] DEBUG: MO concatenated message handling > enabled > 2012-09-12 12:55:42 [14593] [0] INFO: DLR rerouting for smsc id <gsm> > disabled. > 2012-09-12 12:55:42 [14593] [0] INFO: Added logfile > `/home/sudhakar/kannel/logs/smpp.log' with level `0'. > 2012-09-12 12:55:42 [14593] [0] INFO: AT2[gsm]: configuration doesn't show > modemtype. will autodetect > 2012-09-12 12:55:42 [14593] [0] DEBUG: Started thread 6 > (gw/smsc/smsc_at.c:at2_device_thread) > 2012-09-12 12:55:42 [14593] [6] DEBUG: Thread 6 > (gw/smsc/smsc_at.c:at2_device_thread) maps to pid 14593. > 2012-09-12 12:55:42 [14593] [6] INFO: Logging thread `6' to logfile > `/home/sudhakar/kannel/logs/smpp.log' with level `0'. > 2012-09-12 12:55:42 [14593] [0] DEBUG: Started thread 7 > (gw/bb_smscconn.c:sms_router) > 2012-09-12 12:55:42 [14593] [0] INFO: > ---------------------------------------- > 2012-09-12 12:55:42 [14593] [5] DEBUG: Thread 5 (gw/bb_boxc.c:smsboxc_run) > maps to pid 14593. > 2012-09-12 12:55:42 [14593] [0] INFO: Kannel bearerbox II version > svn-r4910M > starting > 2012-09-12 12:55:42 [14593] [0] INFO: Loading store file > `/home/sudhakar/kannel/logs/kannel.store' > 2012-09-12 12:55:42 [14593] [0] INFO: Store-file size 0, starting to > unpack > 2012-09-12 12:55:42 [14593] [0] INFO: Retrieved 0 messages, > non-acknowledged > messages: 0 > 2012-09-12 12:55:42 [14593] [0] DEBUG: Started thread 8 > (gw/bb_store_file.c:store_dumper) > 2012-09-12 12:55:42 [14593] [8] DEBUG: Thread 8 > (gw/bb_store_file.c:store_dumper) maps to pid 14593. > 2012-09-12 12:55:42 [14593] [7] DEBUG: Thread 7 > (gw/bb_smscconn.c:sms_router) maps to pid 14593. > 2012-09-12 12:55:42 [14593] [0] INFO: MAIN: Start-up done, entering > mainloop > 2012-09-12 12:55:42 [14593] [0] DEBUG: AT2[gsm]: start called > 2012-09-12 12:55:42 [14593] [8] DEBUG: Dumping 0 messages to store > 2012-09-12 12:55:42 [14593] [3] DEBUG: Thread 3 > (gw/bb_http.c:httpadmin_run) > maps to pid 14593. > 2012-09-12 12:55:42 [14593] [2] DEBUG: Thread 2 > (gwlib/http.c:server_thread) > maps to pid 14593. > 2012-09-12 12:55:42 [14593] [2] DEBUG: HTTP: Including port 13000, fd 11 > for > polling in server thread > > ---------------------------------------------------------------------------- > ----------------------------------- > > After this kannel doesn't proceed further from there & I don't see the > SMSC > connectivity happening. > I have used minicom & derived on the appropriate AT commands for init > strings. Did a lot of googling & did not find solution for my problem. > Please suggest a solution & let me know where am I going wrong with my > setup. > > Thanks in advance, > Sudhakar > > > > -- > View this message in context: > http://old.nabble.com/Kannel-With-SIM300-GSM-Modem-tp34422189p34422189.html > Sent from the Kannel - User mailing list archive at Nabble.com. > > > > > > -- View this message in context: http://old.nabble.com/Kannel-With-SIM300-GSM-Modem-tp34422189p34423829.html Sent from the Kannel - User mailing list archive at Nabble.com.
