How do i set the log for modem? I tried adding log field in group modems section, but kannel wouldn't start with it.
Alvaro Cornejo wrote: > > Just for sake of better troubleshoot add a separate logfile for the > modem. This way it will be easyer to debug just modem. > > > > On 9/12/12, sudhakar_yg <[email protected]> wrote: >> >> Also I have followed the "Modem initialization" section in the 1.4.3 UG & >> have done the permissions settings accordingly. >> I have also tried run the kannel service as root user. But dont see any >> changes in the behavior. >> >> >> >> >> sudhakar_yg wrote: >>> >>> Thanks for reply Rene, >>> I had read about the permission issue on /dev/ttyUSB0. I have given >>> chmod >>> 777 permission to /dev/ttyUSB0. >>> I am able to access the modem over same port using minicom without any >>> issues. >>> If this permission is not proper, what else permissions i need to give? >>> >>> Cheers, >>> Sudhakar >>> >>> >>> >>> Rene Kluwen wrote: >>>> >>>> Are you sure minicom responds when you enter /dev/ttyUSB0? >>>> If yes, maybe it's a permission issue. >>>> >>>> -----Original Message----- >>>> From: [email protected] >>>> [mailto:[email protected]] >>>> On >>>> Behalf Of sudhakar_yg >>>> Sent: Wednesday, 12 September, 2012 09:48 >>>> To: [email protected] >>>> Subject: Kannel With SIM300 GSM Modem >>>> >>>> >>>> Hi, >>>> I am setting up the kannel over simcom GSM modem. Attached is my >>>> configuration file. >>>> http://old.nabble.com/file/p34422189/simcom.conf simcom.conf When I try >>>> to >>>> bring up my bearerbox & monitor the SMPP log, Following are my SMPP & >>>> Kannel >>>> log, >>>> ---------------------------------------------------------------------------- >>>> ---------------------------------- >>>> SMPP LOG >>>> ---------------------------------------------------------------------------- >>>> ---------------------------------- >>>> 2012-09-12 01:05:16 [8841] [6] DEBUG: AT2[gsm]: detecting modem speed. >>>> 2012-09-12 01:05:16 [8841] [6] INFO: AT2[gsm]: opening device >>>> 2012-09-12 01:05:16 [8841] [6] DEBUG: AT2[gsm]: device opened. Telnet >>>> mode = >>>> 0 >>>> 2012-09-12 01:05:17 [8841] [6] DEBUG: AT2[gsm]: device opened >>>> 2012-09-12 01:05:17 [8841] [6] INFO: AT2[gsm]: speed set to 115200 >>>> 2012-09-12 01:05:17 [8841] [6] DEBUG: AT2[gsm]: --> ^M >>>> 2012-09-12 01:05:19 [8841] [6] DEBUG: AT2[gsm]: --> AT^M >>>> 2012-09-12 01:05:25 [8841] [6] DEBUG: AT2[gsm]: --> AT^M >>>> 2012-09-12 01:05:31 [8841] [6] DEBUG: AT2[gsm]: --> AT^M >>>> >>>> ---------------------------------------------------------------------------- >>>> ----------------------------------- >>>> Kannel Log >>>> ---------------------------------------------------------------------------- >>>> ---------------------------------- >>>> sudhakar@5DMark-II:~/kannel/sbin$ bearerbox ../config/simcom.conf >>>> 2012-09-12 12:55:42 [14593] [0] INFO: Debug_lvl = -1, log_file = >>>> <none>, >>>> log_lvl = 0 >>>> 2012-09-12 12:55:42 [14593] [0] WARNING: DLR: using default 'internal' >>>> for >>>> storage type. >>>> 2012-09-12 12:55:42 [14593] [0] INFO: DLR using storage type: internal >>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: Kannel bearerbox version >>>> `svn-r4910M'. >>>> Build `Sep 6 2012 09:22:08', compiler `4.6.3'. >>>> System Linux, release 3.2.0-29-generic-pae, version #46-Ubuntu SMP Fri >>>> Jul >>>> 27 17:25:43 UTC 2012, machine i686. >>>> Hostname 5DMark-II, IP 127.0.1.1. >>>> Libxml version 2.7.8. >>>> Compiled with MySQL 5.5.24, using MySQL 5.5.24. >>>> Using native malloc. >>>> >>>> 2012-09-12 12:55:42 [14593] [0] INFO: Added logfile >>>> `/home/sudhakar/kannel/logs/kannel.log' with level `0'. >>>> 2012-09-12 12:55:42 [14593] [0] INFO: Started access logfile >>>> `/home/sudhakar/kannel/logs/access.log'. >>>> 2012-09-12 12:55:42 [14593] [0] INFO: SSL not supported, no SSL >>>> initialization done. >>>> 2012-09-12 12:55:42 [14593] [0] INFO: HTTP: Opening server at port >>>> 13000. >>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: Started thread 1 >>>> (gwlib/fdset.c:poller) >>>> 2012-09-12 12:55:42 [14593] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller) >>>> maps >>>> to pid 14593. >>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: Started thread 2 >>>> (gwlib/http.c:server_thread) >>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: Started thread 3 >>>> (gw/bb_http.c:httpadmin_run) >>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: starting smsbox connection >>>> module >>>> 2012-09-12 12:55:42 [14593] [0] INFO: BOXC: 'smsbox-max-pending' not >>>> set, >>>> using default (100). >>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: Adding smsbox routing to id >>>> <smsbox> >>>> for smsc id <gsm> >>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: Started thread 4 >>>> (gw/bb_boxc.c:sms_to_smsboxes) >>>> 2012-09-12 12:55:42 [14593] [4] DEBUG: Thread 4 >>>> (gw/bb_boxc.c:sms_to_smsboxes) maps to pid 14593. >>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: Started thread 5 >>>> (gw/bb_boxc.c:smsboxc_run) >>>> 2012-09-12 12:55:42 [14593] [0] INFO: Set SMS resend frequency to 60 >>>> seconds. >>>> 2012-09-12 12:55:42 [14593] [0] INFO: SMS resend retry set to >>>> unlimited. >>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: MO concatenated message handling >>>> enabled >>>> 2012-09-12 12:55:42 [14593] [0] INFO: DLR rerouting for smsc id <gsm> >>>> disabled. >>>> 2012-09-12 12:55:42 [14593] [0] INFO: Added logfile >>>> `/home/sudhakar/kannel/logs/smpp.log' with level `0'. >>>> 2012-09-12 12:55:42 [14593] [0] INFO: AT2[gsm]: configuration doesn't >>>> show >>>> modemtype. will autodetect >>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: Started thread 6 >>>> (gw/smsc/smsc_at.c:at2_device_thread) >>>> 2012-09-12 12:55:42 [14593] [6] DEBUG: Thread 6 >>>> (gw/smsc/smsc_at.c:at2_device_thread) maps to pid 14593. >>>> 2012-09-12 12:55:42 [14593] [6] INFO: Logging thread `6' to logfile >>>> `/home/sudhakar/kannel/logs/smpp.log' with level `0'. >>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: Started thread 7 >>>> (gw/bb_smscconn.c:sms_router) >>>> 2012-09-12 12:55:42 [14593] [0] INFO: >>>> ---------------------------------------- >>>> 2012-09-12 12:55:42 [14593] [5] DEBUG: Thread 5 >>>> (gw/bb_boxc.c:smsboxc_run) >>>> maps to pid 14593. >>>> 2012-09-12 12:55:42 [14593] [0] INFO: Kannel bearerbox II version >>>> svn-r4910M >>>> starting >>>> 2012-09-12 12:55:42 [14593] [0] INFO: Loading store file >>>> `/home/sudhakar/kannel/logs/kannel.store' >>>> 2012-09-12 12:55:42 [14593] [0] INFO: Store-file size 0, starting to >>>> unpack >>>> 2012-09-12 12:55:42 [14593] [0] INFO: Retrieved 0 messages, >>>> non-acknowledged >>>> messages: 0 >>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: Started thread 8 >>>> (gw/bb_store_file.c:store_dumper) >>>> 2012-09-12 12:55:42 [14593] [8] DEBUG: Thread 8 >>>> (gw/bb_store_file.c:store_dumper) maps to pid 14593. >>>> 2012-09-12 12:55:42 [14593] [7] DEBUG: Thread 7 >>>> (gw/bb_smscconn.c:sms_router) maps to pid 14593. >>>> 2012-09-12 12:55:42 [14593] [0] INFO: MAIN: Start-up done, entering >>>> mainloop >>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: AT2[gsm]: start called >>>> 2012-09-12 12:55:42 [14593] [8] DEBUG: Dumping 0 messages to store >>>> 2012-09-12 12:55:42 [14593] [3] DEBUG: Thread 3 >>>> (gw/bb_http.c:httpadmin_run) >>>> maps to pid 14593. >>>> 2012-09-12 12:55:42 [14593] [2] DEBUG: Thread 2 >>>> (gwlib/http.c:server_thread) >>>> maps to pid 14593. >>>> 2012-09-12 12:55:42 [14593] [2] DEBUG: HTTP: Including port 13000, fd >>>> 11 >>>> for >>>> polling in server thread >>>> >>>> ---------------------------------------------------------------------------- >>>> ----------------------------------- >>>> >>>> After this kannel doesn't proceed further from there & I don't see the >>>> SMSC >>>> connectivity happening. >>>> I have used minicom & derived on the appropriate AT commands for init >>>> strings. Did a lot of googling & did not find solution for my problem. >>>> Please suggest a solution & let me know where am I going wrong with my >>>> setup. >>>> >>>> Thanks in advance, >>>> Sudhakar >>>> >>>> >>>> >>>> -- >>>> View this message in context: >>>> http://old.nabble.com/Kannel-With-SIM300-GSM-Modem-tp34422189p34422189.html >>>> Sent from the Kannel - User mailing list archive at Nabble.com. >>>> >>>> >>>> >>>> >>>> >>>> >>> >>> >> >> -- >> View this message in context: >> http://old.nabble.com/Kannel-With-SIM300-GSM-Modem-tp34422189p34423838.html >> Sent from the Kannel - User mailing list archive at Nabble.com. >> >> >> > > > -- > |-----------------------------------------------------------------------------------------------------------------| > Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier > celular y Nextel > en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via > SMS y GPRS online > Visitenos en www.perusms.NET www.smsglobal.com.mx y > www.pravcom.com > > > -- View this message in context: http://old.nabble.com/Kannel-With-SIM300-GSM-Modem-tp34422189p34424704.html Sent from the Kannel - User mailing list archive at Nabble.com.
