Does this help?
http://www.bdsatish.in/software/android-usb-modem.html From: [email protected] [mailto:[email protected]] On Behalf Of Manoj M N Sent: Friday, 14 September, 2012 08:14 To: [email protected] Subject: Re: Getting my Android Phone to send SMS Hello folks, Please go ahead and flame me if you think this is a stupid question or I haven't done enough work. However can you please give me pointers to go forward from where I am right now? Regards, On Wed, Sep 12, 2012 at 6:30 PM, Manoj M N <[email protected]> wrote: Hello folks, Thanks a lot for helping me getting kannel up and running. I did some playing around with the dummy center for SMS. Now I am trying to plugin my Samsung Galaxy S2 to my mac and get it to send one SMS. I checked the GSM Modem section of kannel. I am not able to find the tty to which this is connected. On a mac there is no /var/log/messages. So I checked the console and on connecting the phone the following message is printed Sep 12 18:16:52 dhcp-173-39-64-34 pcscd[8444]: Non-smartcard device launched pcscd [Vendor: 0X4E8, Product: 0X6860] But searching the web I figured it is found by doing a ls /dev/cu* and found the Samsung device. I tried to do screen /dev/cu.SAMSUNG_MDM 9600 and got just ERROR printed on the screen. Then I tried the following configuration (since I know the /dev/ value now) group = smsc smsc = at modemtype = auto device = /dev/cu.SAMSUNG_MDM speed = 9600 and got this error 2012-09-12 18:32:56 [8759] [6] DEBUG: AT2[/dev/cu.SAMSUNG_MDM]: detecting modem type 2012-09-12 18:32:56 [8759] [6] INFO: AT2[/dev/cu.SAMSUNG_MDM]: opening device 2012-09-12 18:32:56 [8759] [6] DEBUG: AT2[/dev/cu.SAMSUNG_MDM]: device opened. Telnet mode = 0 2012-09-12 18:32:57 [8759] [6] DEBUG: AT2[/dev/cu.SAMSUNG_MDM]: device opened 2012-09-12 18:32:57 [8759] [6] INFO: AT2[/dev/cu.SAMSUNG_MDM]: speed set to 9600 2012-09-12 18:32:57 [8759] [6] DEBUG: AT2[/dev/cu.SAMSUNG_MDM]: --> ATZ^M 2012-09-12 18:33:03 [8759] [6] ERROR: AT2[/dev/cu.SAMSUNG_MDM]: Wrong or no answer to ATZ 2012-09-12 18:33:03 [8759] [6] INFO: AT2[/dev/cu.SAMSUNG_MDM]: Closing device 2012-09-12 18:33:03 [8759] [6] ERROR: AT2[/dev/cu.SAMSUNG_MDM]: Couldn't connect (retrying in 10 seconds). I checked the permissions 007/-- ls -l /dev/cu.SAMSUNG_MDM crw-rw-rw- 1 root wheel 11, 23 Sep 12 18:25 /dev/cu.SAMSUNG_MDM I am running as root. I guess I need to do more configurations to get the connection done properly. Can you please assist me? Regards,
