Thanks Rene, I tried those as well. Still the request doesn't seem to be accepted by the bearerbox.
Can you please check if I have everything now? I have a Samsung Galaxy S2 connected, Kies running as well. I will again try and run it and see. Regards, On Sat, Sep 15, 2012 at 3:22 PM, Rene Kluwen <[email protected]> wrote: > You need to elaborate more on your group = smsbox (sendsms-port) and add a > group = sendsms-user. See the users guide.**** > > ** ** > > *From:* Manoj M N [mailto:[email protected]] > *Sent:* Friday, 14 September, 2012 17:22 > *To:* Rene Kluwen > *Cc:* [email protected] > > *Subject:* Re: Getting my Android Phone to send SMS**** > > ** ** > > Thanks Rene, > > I was able to connect this time. I didn't do everything, but I just added > the init-string and detect-string. Looks like bearerbox is now able to > connect. bearerbox came up and so did smsbox. Please find my kannel.conf > below. I have attached the logs as well. > > group = core > admin-port = 13000 > smsbox-port = 13013 > admin-password = f00bar > > group = smsbox > bearerbox-host = localhost > > #group = smsc > #smsc = fake > #smsc-id = fake1 > #port = 13021 > #connect-allow-ip = *.*.*.* > #allowed-smsc-id=fake1 > > group = smsc > smsc = at > smsc-id = mandroid-smsc > sim-buffering = true > modemtype = USB Modem > my-number = 9448479985 > device = /dev/cu.SAMSUNG_MDM > speed = 460800 > pin=8979 > > group = modems > id = mandroid > detect-string = SAMSUNG > init-string = "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" > > I now used control.html to try and send a message. The send hangs for > ever. > > I think I am very near to getting my first SMS sent out, but stuck on this > problem. > > Regards,**** > > On Fri, Sep 14, 2012 at 3:04 PM, Rene Kluwen <[email protected]> > wrote:**** > > Does this help?**** > > **** > > http://www.bdsatish.in/software/android-usb-modem.html**** > > **** > > **** > > *From:* [email protected] [mailto:[email protected]] > *On Behalf Of *Manoj M N > *Sent:* Friday, 14 September, 2012 08:14 > *To:* [email protected] > *Subject:* Re: Getting my Android Phone to send SMS**** > > **** > > Hello folks,**** > > **** > > Please go ahead and flame me if you think this is a stupid question or I > haven't done enough work. However can you please give me pointers to go > forward from where I am right now?**** > > **** > > Regards,**** > > On Wed, Sep 12, 2012 at 6:30 PM, Manoj M N <[email protected]> wrote:**** > > Hello folks, > > Thanks a lot for helping me getting kannel up and running. I did some > playing around with the dummy center for SMS. > > Now I am trying to plugin my Samsung Galaxy S2 to my mac and get it to > send one SMS. I checked the GSM Modem section of kannel. I am not able to > find the tty to which this is connected. On a mac there is no > /var/log/messages. So I checked the console and on connecting the phone the > following message is printed > > Sep 12 18:16:52 dhcp-173-39-64-34 pcscd[8444]: Non-smartcard device > launched pcscd [Vendor: 0X4E8, Product: 0X6860] > > But searching the web I figured it is found by doing a ls /dev/cu* and > found the Samsung device. I tried to do screen /dev/cu.SAMSUNG_MDM 9600 and > got just ERROR printed on the screen. > > Then I tried the following configuration (since I know the /dev/ value now) > > group = smsc > smsc = at > modemtype = auto > device = /dev/cu.SAMSUNG_MDM > speed = 9600 > > and got this error > 2012-09-12 18:32:56 [8759] [6] DEBUG: AT2[/dev/cu.SAMSUNG_MDM]: detecting > modem type > 2012-09-12 18:32:56 [8759] [6] INFO: AT2[/dev/cu.SAMSUNG_MDM]: opening > device > 2012-09-12 18:32:56 [8759] [6] DEBUG: AT2[/dev/cu.SAMSUNG_MDM]: device > opened. Telnet mode = 0 > 2012-09-12 18:32:57 [8759] [6] DEBUG: AT2[/dev/cu.SAMSUNG_MDM]: device > opened > 2012-09-12 18:32:57 [8759] [6] INFO: AT2[/dev/cu.SAMSUNG_MDM]: speed set > to 9600 > 2012-09-12 18:32:57 [8759] [6] DEBUG: AT2[/dev/cu.SAMSUNG_MDM]: --> ATZ^M > 2012-09-12 18:33:03 [8759] [6] ERROR: AT2[/dev/cu.SAMSUNG_MDM]: Wrong or > no answer to ATZ > 2012-09-12 18:33:03 [8759] [6] INFO: AT2[/dev/cu.SAMSUNG_MDM]: Closing > device > 2012-09-12 18:33:03 [8759] [6] ERROR: AT2[/dev/cu.SAMSUNG_MDM]: Couldn't > connect (retrying in 10 seconds). > > I checked the permissions > 007/-- ls -l /dev/cu.SAMSUNG_MDM > crw-rw-rw- 1 root wheel 11, 23 Sep 12 18:25 /dev/cu.SAMSUNG_MDM > > I am running as root. I guess I need to do more configurations to get the > connection done properly. Can you please assist me? > > Regards,**** > > **** > > ** ** >
