Hi Always CC Kannel list so you can get help from others and other can benefit from this.
What modem are you using? post your modem.conf file also CMS ERROR 69 is puzzling; wavecom documentation said "Requested facility not implemented". This usually indicates that the network is unable to provide the requested short message service. Have you tried to send sms with this sim from a standard phone? If that does work, then you need to recheck modem init string. Else it can be a carrier issue where your sim is not SMS enabled or something similar. In addition, you can define a separate log for your modem. This usually helps debugging. Just add a log-file statement in smsc-at config as is on bearerbox config. Regards Alvaro On 4/17/13, Anders Hofstee <[email protected]> wrote: > Hi Alvaro, > > Thank you for responding. > > I have added AT+CMEE=1 to the modem init string in modems.conf. The error > no longer shows a s a GENERIC Error but rather, if I'm reading it correctly, > a CMS ERROR: 69 Requested facility not implemented. > > Identical messages seem to go through fine. This only affects certain > numbers. > Thank you for your assistance! > > anders… > > > > Log snippet below: > > 2013-04-17 10:01:08 [27086] [7] INFO: AT2[usb0-modem]: AT SMSC successfully > opened. > 2013-04-17 10:01:08 [27086] [8] DEBUG: sms_router: gwlist_len = 1 > 2013-04-17 10:01:08 [27086] [8] DEBUG: sms_router: handling message > (0x94573d8 vs 0x94573d8) > 2013-04-17 10:01:08 [27086] [8] DEBUG: Message routed successfully. > 2013-04-17 10:01:10 [27086] [7] DEBUG: AT2[usb0-modem]: TP-Validity-Period: > 24.0 hours > 2013-04-17 10:01:10 [27086] [7] DEBUG: AT2[usb0-modem]: --> AT+CMGS=151^M > 2013-04-17 10:01:10 [27086] [7] DEBUG: AT2[usb0-modem]: <-- > > 2013-04-17 10:01:10 [27086] [7] DEBUG: AT2[usb0-modem]: send command status: > 1 > 2013-04-17 10:01:10 [27086] [7] DEBUG: AT2[usb0-modem]: --> > 0011000B917670774033F70000A79CC2B2DB9E7693DFA0343A0C62A6CF6150D21D76839A617718442DCBCBEAB43B1C0241C3F2B0B8EC9E83C461509A1E06B9D361507A9E7683E4F57008146CA741F3721A840ECBEBEB30A85D76CFC3E7B21BB40E93C3A079B91D768741617A1D34AFC3DF727A1894A68741EFB47B1E069DC3F2B09B9E0E83D2F43008FD0689CBE232681EAE93C3F6323B04 > 2013-04-17 10:01:10 [27086] [7] DEBUG: AT2[usb0-modem]: --> ^Z > 2013-04-17 10:01:14 [27086] [7] DEBUG: AT2[usb0-modem]: <-- > > 2013-04-17 10:01:14 [27086] [7] DEBUG: AT2[usb0-modem]: <-- +CMS ERROR: 69 > 2013-04-17 10:01:14 [27086] [7] ERROR: AT2[usb0-modem]: CMS ERROR: +CMS > ERROR: 69 > 2013-04-17 10:01:14 [27086] [7] ERROR: AT2[usb0-modem]: CMS ERROR: Requested > facility not implemented (69) > 2013-04-17 10:01:14 [27086] [7] DEBUG: AT2[usb0-modem]: send command status: > 1 > 2013-04-17 10:01:14 [27086] [8] DEBUG: sms_router: handling message > (0xb5a00818 vs 0xb5a00818) > 2013-04-17 10:01:14 [27086] [8] DEBUG: re-queing SMS not-yet-to-be resent > 2013-04-17 10:01:14 [27086] [8] DEBUG: sms_router: handling message > (0xb5a00818 vs 0xb5a00818) > 2013-04-17 10:01:14 [27086] [8] DEBUG: re-queing SMS not-yet-to-be resent > 2013-04-17 10:01:14 [27086] [8] DEBUG: sms_router: time to sleep 30.00 > secs. > 2013-04-17 10:01:44 [27086] [8] DEBUG: sms_router: gwlist_len = 1 > 2013-04-17 10:01:44 [27086] [8] DEBUG: sms_router: handling message > (0xb5a00818 vs 0xb5a00818) > 2013-04-17 10:01:44 [27086] [8] DEBUG: re-queing SMS not-yet-to-be resent > 2013-04-17 10:01:44 [27086] [8] DEBUG: sms_router: handling message > (0xb5a00818 vs 0xb5a00818) > 2013-04-17 10:01:44 [27086] [8] DEBUG: re-queing SMS not-yet-to-be resent > 2013-04-17 10:01:44 [27086] [8] DEBUG: sms_router: time to sleep 30.00 > secs. > 2013-04-17 10:02:14 [27086] [8] DEBUG: sms_router: gwlist_len = 1 > 2013-04-17 10:02:14 [27086] [8] DEBUG: sms_router: handling message > (0xb5a00818 vs 0xb5a00818) > 2013-04-17 10:02:14 [27086] [8] DEBUG: Message routed successfully. > 2013-04-17 10:02:16 [27086] [7] DEBUG: AT2[usb0-modem]: TP-Validity-Period: > 24.0 hours > 2013-04-17 10:02:16 [27086] [7] DEBUG: AT2[usb0-modem]: --> AT+CMGS=151^M > 2013-04-17 10:02:16 [27086] [7] DEBUG: AT2[usb0-modem]: <-- > > 2013-04-17 10:02:16 [27086] [7] DEBUG: AT2[usb0-modem]: send command status: > 1 > 2013-04-17 10:02:16 [27086] [7] DEBUG: AT2[usb0-modem]: --> > 0011000B917670774033F70000A79CC2B2DB9E7693DFA0343A0C62A6CF6150D21D76839A617718442DCBCBEAB43B1C0241C3F2B0B8EC9E83C461509A1E06B9D361507A9E7683E4F57008146CA741F3721A840ECBEBEB30A85D76CFC3E7B21BB40E93C3A079B91D768741617A1D34AFC3DF727A1894A68741EFB47B1E069DC3F2B09B9E0E83D2F43008FD0689CBE232681EAE93C3F6323B04 > 2013-04-17 10:02:16 [27086] [7] DEBUG: AT2[usb0-modem]: --> ^Z > 2013-04-17 10:02:20 [27086] [7] DEBUG: AT2[usb0-modem]: <-- > > 2013-04-17 10:02:20 [27086] [7] DEBUG: AT2[usb0-modem]: <-- +CMS ERROR: 69 > 2013-04-17 10:02:20 [27086] [7] ERROR: AT2[usb0-modem]: CMS ERROR: +CMS > ERROR: 69 > 2013-04-17 10:02:20 [27086] [7] ERROR: AT2[usb0-modem]: CMS ERROR: Requested > facility not implemented (69) > 2013-04-17 10:02:20 [27086] [7] DEBUG: AT2[usb0-modem]: send command status: > 1 > 2013-04-17 10:02:20 [27086] [8] DEBUG: sms_router: handling message > (0xb5a00530 vs 0xb5a00530) > 2013-04-17 10:02:20 [27086] [8] DEBUG: re-queing SMS not-yet-to-be resent > 2013-04-17 10:02:20 [27086] [8] DEBUG: sms_router: handling message > (0xb5a00530 vs 0xb5a00530) > 2013-04-17 10:02:20 [27086] [8] DEBUG: re-queing SMS not-yet-to-be resent > 2013-04-17 10:02:20 [27086] [8] DEBUG: sms_router: time to sleep 30.00 > secs. > 2013-04-17 10:02:33 [27086] [14] INFO: Connection closed by the box > <127.0.0.1> > > > > > > On 16/04/2013, at 11:30 PM, Alvaro Cornejo <[email protected]> > wrote: > >> Hi >> >> Add AT+CMEE=1 or =2 to your modem init string. It will configure modem >> to give more detailed info of the error. >> >> post new log. >> >> Regards >> >> Alvaro >> >> On 4/16/13, Anders Hofstee <[email protected]> wrote: >>> Hi all, >>> >>> If anyone could help with the following problem it would be very much >>> appreciated. >>> >>> I'm new to kannel and have seem to run across a problem where there are >>> times when kannel will continue to (re)send messages seemingly >>> indefinitely >>> unless stopped. This happens with some of the messages during a bulk >>> send. >>> All of the numbers are correctly formatted, though I'm not sure if all >>> are >>> active. >>> >>> The bearerbox.log shows repeated GENERIC Errors which is often followed >>> by a >>> re-queue message. >>> >>> A snippet from the bearer.log is below, followed by my kannel.conf >>> >>> 2013-04-15 15:21:57 [18162] [7] DEBUG: AT2[usb0-modem]: <-- ERROR >>> 2013-04-15 15:21:57 [18162] [7] ERROR: AT2[usb0-modem]: Generic error: >>> ERROR >>> 2013-04-15 15:21:57 [18162] [7] DEBUG: AT2[usb0-modem]: send command >>> status: >>> -1 >>> 2013-04-15 15:21:59 [18162] [7] DEBUG: AT2[usb0-modem]: >>> TP-Validity-Period: >>> 24.0 hours >>> 2013-04-15 15:21:59 [18162] [7] DEBUG: AT2[usb0-modem]: --> >>> AT+CMGS=150^M >>> 2013-04-15 15:21:59 [18162] [7] DEBUG: AT2[usb0-modem]: <-- > >>> 2013-04-15 15:21:59 [18162] [7] DEBUG: AT2[usb0-modem]: send command >>> status: >>> 1 >>> 2013-04-15 15:21:59 [18162] [7] DEBUG: AT2[usb0-modem]: --> >>> 0011000B917670676962F20000A79BC979DA0D92D7C3A0343A0CA297DBF03A481C2687D72076989C0EAF41E23028ED0EBB41EE7418340FD7C9651668FD0EB3D36110FA0D4AD3C320773A0C5A87C56537C8FD06A1EBF33A28ED36BFE5EDF03C5C7783C461103C2CA797D3F23068FD768741E230E89D76CFC320F31B549EC3C3F33AA8ECA6CBCBA077D80D42BF41F3709D5C0691D3E1B50B >>> 2013-04-15 15:21:59 [18162] [7] DEBUG: AT2[usb0-modem]: --> ^Z >>> 2013-04-15 15:22:03 [18162] [7] DEBUG: AT2[usb0-modem]: <-- > >>> 2013-04-15 15:22:03 [18162] [7] DEBUG: AT2[usb0-modem]: <-- ERROR >>> 2013-04-15 15:22:03 [18162] [7] ERROR: AT2[usb0-modem]: Generic error: >>> ERROR >>> 2013-04-15 15:22:03 [18162] [7] DEBUG: AT2[usb0-modem]: send command >>> status: >>> -1 >>> 2013-04-15 15:22:05 [18162] [7] DEBUG: AT2[usb0-modem]: >>> TP-Validity-Period: >>> 24.0 hours >>> 2013-04-15 15:22:05 [18162] [7] DEBUG: AT2[usb0-modem]: --> >>> AT+CMGS=139^M >>> 2013-04-15 15:22:05 [18162] [8] DEBUG: sms_router: gwlist_len = 6 >>> 2013-04-15 15:22:05 [18162] [8] DEBUG: sms_router: handling message >>> (0xb1202990 vs 0xb1202990) >>> 2013-04-15 15:22:05 [18162] [8] DEBUG: re-queing SMS not-yet-to-be >>> resent >>> 2013-04-15 15:22:05 [18162] [8] DEBUG: sms_router: handling message >>> (0xb12027b8 vs 0xb1202990) >>> 2013-04-15 15:22:05 [18162] [8] DEBUG: re-queing SMS not-yet-to-be >>> resent >>> 2013-04-15 15:22:05 [18162] [8] DEBUG: sms_router: handling message >>> (0xb1203ca0 vs 0xb1202990) >>> 2013-04-15 15:22:05 [18162] [8] DEBUG: re-queing SMS not-yet-to-be >>> resent >>> 2013-04-15 15:22:05 [18162] [8] DEBUG: sms_router: handling message >>> (0xb1200808 vs 0xb1202990) >>> 2013-04-15 15:22:05 [18162] [8] DEBUG: re-queing SMS not-yet-to-be >>> resent >>> 2013-04-15 15:22:05 [18162] [8] DEBUG: sms_router: handling message >>> (0xb1203a68 vs 0xb1202990) >>> 2013-04-15 15:22:05 [18162] [8] DEBUG: re-queing SMS not-yet-to-be >>> resent >>> 2013-04-15 15:22:05 [18162] [8] DEBUG: sms_router: handling message >>> (0xb1204398 vs 0xb1202990) >>> 2013-04-15 15:22:05 [18162] [8] DEBUG: re-queing SMS not-yet-to-be >>> resent >>> 2013-04-15 15:22:05 [18162] [8] DEBUG: sms_router: handling message >>> (0xb1202990 vs 0xb1202990) >>> 2013-04-15 15:22:05 [18162] [8] DEBUG: re-queing SMS not-yet-to-be >>> resent >>> 2013-04-15 15:22:05 [18162] [8] DEBUG: sms_router: time to sleep 30.00 >>> secs. >>> 2013-04-15 15:22:05 [18162] [7] DEBUG: AT2[usb0-modem]: <-- > >>> >>> >>> >>> >>> >>> >>> >>> kannel.conf >>> >>> # >>> # Sample configuration file for Kannel bearerbox on Debian. >>> # See the documentation for explanations of fields. >>> # >>> >>> # HTTP administration is disabled by default. Make sure you set the >>> # password if you enable it. >>> >>> include = "/etc/kannel/modems.conf" >>> >>> >>> group = core >>> admin-port = 13000 >>> admin-password = ****** >>> status-password = ****** >>> admin-deny-ip = "*.*.*.*" >>> admin-allow-ip = "127.0.0.1" >>> smsbox-port = 13001 >>> wdp-interface-name = "*" >>> log-file = "/var/log/kannel/bearerbox.log" >>> box-deny-ip = "*.*.*.*" >>> box-allow-ip = "127.0.0.1" >>> store-type = spool >>> store-location = "/var/spool/kannel" >>> >>> >>> #group = wapbox >>> #bearerbox-host = localhost >>> #log-file = "/var/log/kannel/wapbox.log" >>> >>> group = smsc >>> smsc = fake >>> smsc-id = FAKE >>> port = 10000 >>> connect-allow-ip = 127.0.0.1 >>> >>> group = smsbox >>> bearerbox-host = 127.0.0.1 >>> sendsms-port = 13013 >>> sendsms-chars = "0123456789 +-" >>> log-file = "/var/log/kannel/smsbox.log" >>> log-level = 0 >>> access-log = "/var/log/kannel/smsbox-access.log" >>> reply-couldnotfetch = "Your message could not be processed at this time. >>> Please try again later. (err=couldnotfetch)" >>> reply-requestfailed = "Your message could not be processed at this time. >>> Please try again later. (err=requestfailed)" >>> reply-couldnotrepresent = "Your message could not be processed at this >>> time. >>> Please try again later. (err=couldnotrepresent)" >>> http-request-retry = 3 >>> http-queue-delay = 10 >>> >>> group = sendsms-user >>> username = ****** >>> password = ****** >>> user-deny-ip = "*.*.*.*" >>> user-allow-ip = "127.0.0.1;" >>> >>> group = sms-service >>> keyword = ping-kannel >>> text = "Kannel is online and responding to messages." >>> >>> group = smsc >>> smsc = at >>> smsc-id = usb0-modem >>> my-number = *********** >>> modemtype = auto >>> device = /dev/ttyUSB0 >>> >>> group = sms-service >>> keyword = default >>> catch-all = yes >>> accepted-smsc = usb0-modem >>> #max-message = 0 >>> accept-x-kannel-headers = true >>> assume-plain-text= true >>> get-url = >>> http://127.0.0.1:8000/router/receive?message=%b&sender=%p&backend=console >>> omit-empty = true >>> >>> >>> >>> >> >> >> -- >> |-----------------------------------------------------------------------------------------------------------------| >> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier >> celular y Nextel >> en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via >> SMS y GPRS online >> Visitenos en www.perusms.NET www.smsglobal.com.mx y >> www.pravcom.com > > -- |-----------------------------------------------------------------------------------------------------------------| Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier celular y Nextel en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via SMS y GPRS online Visitenos en www.perusms.NET www.smsglobal.com.mx y www.pravcom.com
