Hi Alvaro, I tried with all possibles values for msg-id-type, 0x01, 0x02 and 0x03 and i got the same error.
Thanks On Wed, Oct 23, 2013 at 9:02 PM, Alvaro Cornejo <[email protected]>wrote: > Hi Alejandro. > > You are getting the dlr, but its id comes in the wrong format > (dec/hex). And kannel is unable to match it with a message in its > reccords, so it discards the dlr > > Check parameter "msg-id-type" and adjust accordingly > > You are receiving the message id as 10939229b39(HEX) that is > 1139124902713(DEC) > > Hope this time you get it right. > > Regards > > Alvaro > > |-----------------------------------------------------------------------------------------------------------------| > Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier > celular y Nextel > en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via > SMS y GPRS online > Visitenos en www.perusms.com > > > On Wed, Oct 23, 2013 at 5:18 PM, Alejandro Mussi <[email protected]> > wrote: > > Hi Alvaro, > > > > I tried with dlr-mask=31 and i here is what i get on the logs regarding > dlr, > > see below: > > > > 2013-10-23 18:20:41 [2247] [7] DEBUG: > > SMPP[SMPP:200.85.32.114:5600/5600:w3:VMA]: Got PDU: > > 2013-10-23 18:20:41 [2247] [7] DEBUG: SMPP PDU 0x7fdfac000a70 dump: > > 2013-10-23 18:20:41 [2247] [7] DEBUG: type_name: deliver_sm > > 2013-10-23 18:20:41 [2247] [7] DEBUG: command_id: 5 = 0x00000005 > > 2013-10-23 18:20:41 [2247] [7] DEBUG: command_status: 0 = 0x00000000 > > 2013-10-23 18:20:41 [2247] [7] DEBUG: sequence_number: 52081 = > 0x0000cb71 > > 2013-10-23 18:20:41 [2247] [7] DEBUG: service_type: NULL > > 2013-10-23 18:20:41 [2247] [7] DEBUG: source_addr_ton: 1 = 0x00000001 > > 2013-10-23 18:20:41 [2247] [7] DEBUG: source_addr_npi: 1 = 0x00000001 > > 2013-10-23 18:20:41 [2247] [7] DEBUG: source_addr: "595981434xx" > > 2013-10-23 18:20:41 [2247] [7] DEBUG: dest_addr_ton: 2 = 0x00000002 > > 2013-10-23 18:20:41 [2247] [7] DEBUG: dest_addr_npi: 1 = 0x00000001 > > 2013-10-23 18:20:41 [2247] [7] DEBUG: destination_addr: "1244" > > 2013-10-23 18:20:41 [2247] [7] DEBUG: esm_class: 4 = 0x00000004 > > 2013-10-23 18:20:41 [2247] [7] DEBUG: protocol_id: 0 = 0x00000000 > > 2013-10-23 18:20:41 [2247] [7] DEBUG: priority_flag: 0 = 0x00000000 > > 2013-10-23 18:20:41 [2247] [7] DEBUG: schedule_delivery_time: NULL > > 2013-10-23 18:20:41 [2247] [7] DEBUG: validity_period: NULL > > 2013-10-23 18:20:41 [2247] [7] DEBUG: registered_delivery: 1 = > 0x00000001 > > 2013-10-23 18:20:41 [2247] [7] DEBUG: replace_if_present_flag: 0 = > > 0x00000000 > > 2013-10-23 18:20:41 [2247] [7] DEBUG: data_coding: 0 = 0x00000000 > > 2013-10-23 18:20:41 [2247] [7] DEBUG: sm_default_msg_id: 0 = 0x00000000 > > 2013-10-23 18:20:41 [2247] [7] DEBUG: sm_length: 121 = 0x00000079 > > 2013-10-23 18:20:41 [2247] [7] DEBUG: short_message: > > 2013-10-23 18:20:41 [2247] [7] DEBUG: Octet string at 0x7fdfac000c70: > > 2013-10-23 18:20:41 [2247] [7] DEBUG: len: 121 > > 2013-10-23 18:20:41 [2247] [7] DEBUG: size: 122 > > 2013-10-23 18:20:41 [2247] [7] DEBUG: immutable: 0 > > 2013-10-23 18:20:41 [2247] [7] DEBUG: data: 69 64 3a 31 30 39 33 39 > 32 > > 32 39 62 33 39 20 73 id:10939229b39 s > > 2013-10-23 18:20:41 [2247] [7] DEBUG: data: 75 62 3a 30 30 31 20 64 > 6c > > 76 72 64 3a 30 30 31 ub:001 dlvrd:001 > > 2013-10-23 18:20:41 [2247] [7] DEBUG: data: 20 73 75 62 6d 69 74 20 > 64 > > 61 74 65 3a 31 33 31 submit date:131 > > 2013-10-23 18:20:41 [2247] [7] DEBUG: data: 30 32 33 31 38 30 31 20 > 64 > > 6f 6e 65 20 64 61 74 0231801 done dat > > 2013-10-23 18:20:41 [2247] [7] DEBUG: data: 65 3a 31 33 31 30 32 33 > 31 > > 38 30 31 20 73 74 61 e:1310231801 sta > > 2013-10-23 18:20:41 [2247] [7] DEBUG: data: 74 3a 44 45 4c 49 56 52 > 44 > > 20 65 72 72 3a 30 20 t:DELIVRD err:0 > > 2013-10-23 18:20:41 [2247] [7] DEBUG: data: 74 65 78 74 3a 6d 65 73 > 73 > > 61 67 65 20 53 61 62 text:message Sab > > 2013-10-23 18:20:41 [2247] [7] DEBUG: data: 69 61 73 20 71 75 65 20 > 74 > > ias que t > > 2013-10-23 18:20:41 [2247] [7] DEBUG: Octet string dump ends. > > 2013-10-23 18:20:41 [2247] [7] DEBUG: message_state: 2 = 0x00000002 > > 2013-10-23 18:20:41 [2247] [7] DEBUG: receipted_message_id: > "10939229b39" > > 2013-10-23 18:20:41 [2247] [7] DEBUG: SMPP PDU dump ends. > > > > 2013-10-23 18:20:41 [2247] [7] DEBUG: > > SMPP[SMPP:200.85.32.114:5600/5600:w3:VMA] handle_pdu, got DLR > > 2013-10-23 18:20:41 [2247] [7] DEBUG: DLR[internal]: Looking for DLR > > smsc=SMPP:200.85.32.114:5600/5600:w3:VMA, ts=10939229b39, > dst=595981434xxx, > > type=1 > > 2013-10-23 18:20:41 [2247] [7] WARNING: DLR[internal]: DLR from > > SMSC<SMPP:200.85.32.114:5600/5600:w3:VMA> for DST<595981434xxx> not > found. > > 2013-10-23 18:20:41 [2247] [7] ERROR: > > SMPP[SMPP:200.85.32.114:5600/5600:w3:VMA]: got DLR but could not find > > message or was not interested in it id<10939229b39> dst<595981434xxx>, > > type<1> > > > > Here is what i send to kannel: > > > http://xxx.xxx.xx:13013/cgi-bin/sendsms?username=xxx&password=xxx&to=+595981434xxx&from=1244&binfo=YYYYY&text=bla+bla+bla+blaaaaa&dlr-url=http://xxx.xxx.xxx/sms/api/dlr.php?myId=181&type=%d&dlr-mask=31 > > > > > > I expect a http call with the type argument set but i got a GET resquest > > with only myId set: > > 192.168.1.1 - - [23/Oct/2013:18:20:37 -0300] "GET > /sms/api/dlr.php?myId=189 > > HTTP/1.1" 200 - > > > > Any idea why i do not get the "type" parameter set back? > > > > What i actually need is the command_status of the submit_sm_resp of the > > corresponding submit_sm i sent. > > When i look in the bearbox logs i know with the sequence_number the > > corresponding submit_sm message i sent, and with the command_status on > the > > submit_sm_resp i can check what happened with the message (i know what > > operator means with different status code), but this process i need to > > automate and the closest solution i found is using DLR. > > > > Thanks for the help. > > > > Best > > > > > > > > > > > > > > > > On Mon, Oct 21, 2013 at 2:43 PM, Alvaro Cornejo < > [email protected]> > > wrote: > >> > >> Hi Alejandro > >> > >> dlr-mask indicates which reports you want to receive. According to > >> that, you add the values for each status and that is what you use. > >> > >> If you want status 1 and 2 use a value of 3 (1+2). Else try starting > >> with 31. It does ask for all available status, included intermediates. > >> > >> Manual provides values for other statuses. > >> > >> Also note that eventhough you request "all" statuses; its the operator > >> who decides which dlrs is willing to send you.... if any :( > >> > >> Hope helps > >> > >> Alvaro > >> > >> > |-----------------------------------------------------------------------------------------------------------------| > >> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier > >> celular y Nextel > >> en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via > >> SMS y GPRS online > >> Visitenos en www.perusms.com > >> > >> > >> On Mon, Oct 21, 2013 at 8:35 AM, Alejandro Mussi <[email protected]> > >> wrote: > >> > Hi Alvaro, > >> > > >> > Thanks for the response. I am new using kannel and i think i am > missing > >> > some > >> > info. I also tried sending my own url to the message i submit to > kannel. > >> > When a send to sms-service cgi i add these two parameters: > >> > ..&dlr-url=$dlr_url_encoded&dlr-mask=1+2 > >> > > >> > where $dlr_url_encoded = http://xxx.xxx.xxx.dlr.php?myId=YYY&type=%d > >> > > >> > Message are sent successfully but i do not get the call back to the > url > >> > i > >> > defined above in order to process. > >> > > >> > Thanks > >> > > >> > > >> > > >> > > >> > > >> > On Fri, Oct 18, 2013 at 7:56 PM, Alvaro Cornejo > >> > <[email protected]> > >> > wrote: > >> >> > >> >> Hi > >> >> > >> >> The table defined in kannel config is only for kannel usage. kannel > >> >> stores dlr there only until message is delivered, then reccord is > >> >> deleted. That is why it is normally empty. > >> >> > >> >> If you do want to store dlrs, you should add your own ulr to the > >> >> message you submit to kannel. Then you do whatever you want with that > >> >> info. Check user manual for dlr-url and related. > >> >> > >> >> Regards > >> >> > >> >> Alvaro > >> >> > >> >> > >> >> > |-----------------------------------------------------------------------------------------------------------------| > >> >> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde > cualquier > >> >> celular y Nextel > >> >> en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias > via > >> >> SMS y GPRS online > >> >> Visitenos en www.perusms.com > >> >> > >> >> > >> >> On Fri, Oct 18, 2013 at 2:30 PM, Alejandro Mussi <[email protected] > > > >> >> wrote: > >> >> > Hi, > >> >> > > >> >> > I am trying to save dlr on a persistant system in order to check > >> >> > messages > >> >> > that were successfully delivered or not, but i am having problems > to > >> >> > run > >> >> > dlr on mysql or using dlr-url. Here is my kannel.conf file > >> >> > > >> >> > group = core > >> >> > admin-port = 13000 > >> >> > admin-password = xxx > >> >> > status-password = xxx > >> >> > admin-deny-ip = "*.*.*.*" > >> >> > admin-allow-ip = "127.0.0.1" > >> >> > smsbox-port = 13001 > >> >> > #wapbox-port = 13002 > >> >> > box-deny-ip = "*.*.*.*" > >> >> > box-allow-ip = "127.0.0.1" > >> >> > wdp-interface-name = "*" > >> >> > log-file = "/var/log/kannel/bearerbox.log" > >> >> > log-level = 0 > >> >> > > >> >> > group = mysql-connection > >> >> > id = mydlr > >> >> > host = localhost > >> >> > username = xx > >> >> > password = xx > >> >> > database = xx > >> >> > max-connections = 1 > >> >> > > >> >> > group = dlr-db > >> >> > id = mydlr > >> >> > table = dlr > >> >> > field-smsc = smsc > >> >> > field-timestamp = ts > >> >> > field-destination = destination > >> >> > field-source = source > >> >> > field-service = service > >> >> > field-url = url > >> >> > field-mask = mask > >> >> > field-status = status > >> >> > field-boxc-id = boxc > >> >> > > >> >> > > >> >> > Attach goes the dlr table structure. > >> >> > > >> >> > If I add on the core group dlr-storage = mysql, Kannnel does not > >> >> > start. > >> >> > > >> >> > > >> >> > > >> >> > #Using dlr-url > >> >> > > >> >> > I tried also using dlr-url on sms-service adding the following > data: > >> >> > > >> >> > $url = Constant::$KANNEL_SMS_SENDER_URL . > >> >> > > >> >> > > >> >> > > "to=$to_number&from=$src_number&binfo=$service_type&text=$text_encoded&dlr-url=$dlr_url_encoded&dlr-mask=1+2"; > >> >> > > >> >> > Kannel receives and process the message but i could not get the > >> >> > response > >> >> > from kannel to the url i especified. > >> >> > > >> >> > I tried to add also in kannel.conf dlr-url and dlr-mas (see below) > >> >> > but > >> >> > kannel does not start when i add those two lines. > >> >> > > >> >> > > >> >> > group = sms-service > >> >> > keyword = default > >> >> > get-url = > >> >> > "http://xxx.xxx.file.php?binfo=%B&keyword=%k&from=%p&to=%P&text=%a > " > >> >> > accept-x-kannel-headers = true > >> >> > max-messages = 3 > >> >> > concatenation = true > >> >> > catch-all = true > >> >> > omit-empty = true > >> >> > dlr-url = "http://xxx.xxx.dlr.php?type=%d"; > >> >> > dlr-mask = 1+2 > >> >> > > >> >> > > >> >> > > >> >> > Any help with this issue?? > >> >> > > >> >> > Thanks > >> >> > > >> >> > -- > >> >> > --------------------------------------------------------- > >> >> > Alejandro Mussi Campos Cervera > >> > > >> > > >> > > >> > > >> > -- > >> > --------------------------------------------------------- > >> > Alejandro Mussi Campos Cervera > > > > > > > > > > -- > > --------------------------------------------------------- > > Alejandro Mussi Campos Cervera > -- --------------------------------------------------------- Alejandro Mussi Campos Cervera
