Hi Arif, I believe your issue is related to Telco provider.
1 - To send an USSD request, you have to send a submit_sm packet with this TLV with value "2", which its sent accordingly by you. When you receive a deliver_sm packet with this TLV in response, the value will be "18", instead telco sends you 12 which is a reserved code and might interrupt the session (im not sure what does 12 code causes). 2 - Also submit_sm_resp from Telco is not including message id, producing an error. These two issues need to be addressed by them. On Thu, Apr 14, 2016 at 3:22 AM, Arif Noor <[email protected]> wrote: > Hi Elton, > > > > Kindly find the attachment for the logs. Note that this was done manually > since the application are not functioning yet since I need to get the MO > through first. > > > > Thank you, > > Arif Noor. > > > > *From:* Elton Hoxha [mailto:[email protected]] > *Sent:* Wednesday, April 13, 2016 8:30 PM > *To:* Arif Noor > *Cc:* Stipe Tolj; [email protected] > *Subject:* Re: USSD with Kannel > > > > Also please debug logs of submit SM after you are receiving initial PSSR. > > > > >
