Here <http://www.lisp4.net/lisp-site/> you can find all the sites which
are registered in beta network. You could try to ping one of them. Even
they are up, it could be that they don't reply to ping. Try several ones.
Again, I would need the debug logs and a wireshark trace from both sides
of the testbed (if the second one use LISPmob). Please set the
proxy-reply of the configuration file to off in order we could see that
you are receiving the map reply. If in the other part of the testbed you
are using LISPmob, try to use the new release.
Albert
On 05/16/2013 04:12 PM, Daniele wrote:
Ok, I can ping 153.16.10.11, but the brainstorming is not over.. the
EID 153.16.38.132 maybe is down, but do you have some other EID I can
try?
Because here in the lab I have another LISP testbed (153.16.44.112/29)
and with it I can also ping the 153.16.10.11, but not the
153.16.44.120, which is the lisp mob client i am configuring!
The communication between these two sites is the only thing I care,
and it is not working!
Daniele
On 16/mag/2013, at 15:26, Albert López wrote:
Hi Daniele,
We have tried to ping the same host than you and we have realized
that this host doesn't reply to ping. You could try to ping
153.16.10.11 which is the EID of the www.lisp4.net web page. I hope
this one will reply the ping as it has done for us.
Regards
Albert
On 05/16/2013 01:25 PM, Daniele wrote:
Of course thanks, what do you want me to capture? Do I filter the
port 4342 for the interfaces while i try a ping?
Thanks
Daniele
On 16/mag/2013, at 13:22, Albert López wrote:
Could you send us a wireshark capture of all interfaces and send us
the logs with debug level 3?
Thanks
Albert
On 05/16/2013 01:18 PM, Daniele wrote:
Yes I configured the sysctl options as in the read me file.
On May 16, 2013 1:13 PM, "Alberto Rodriguez-Natal"
<[email protected] <mailto:[email protected]>> wrote:
Hi Daniele,
I'm assuming that those ping replies that you see on the eth0
interface are LISP encapsulated. I don't know if you have
already check this but, it's the sysctl configuration for IP
forwarding and rp_filter correct?
Check the README file on section "Running LISPmob" and let us
know.
Best,
Alberto
P.S. Thanks Teto for explaining how to get the new release
alongside with the old one ;)
On 16 May 2013 13:01, Daniele <[email protected]
<mailto:[email protected]>> wrote:
I updated to the 0.3.2 version, same as before. I can see
that the /32 EID is registered in the map server with the
correct RLOC, but any ping to it doesn't work.
:(
This is my lisped.conf file, I'm sure that the 4341 and
4342 ports are completely open.
What else can I check?
Thanks
Daniele
On 16/mag/2013, at 11:15, Teto wrote:
> follow the instructions here to download master from git:
> http://lispmob.org/downloads/linux : something like
> "git clone git://github.com/LISPmob/lispmob.git
<http://github.com/LISPmob/lispmob.git> lispmob0.3.2"
> then you cd lispmob0.3.2, type "make" and it will
generate an
> executable in the lispd subdirectory. Be sure to call
the executable
> with absolute path otherwise it might call a previously
installed
> lispmob.
>
> On Thu, May 16, 2013 at 10:54 AM, Daniele
<[email protected] <mailto:[email protected]>> wrote:
>> Ok, I'll try that, can I install it on top of the
current version?
>>
>> Thanks
>> Regards
>> Daniele
>>
>>
>> On 16/mag/2013, at 10:47, Albert López wrote:
>>
>> Yesterday we released version 0.3.2. This wan announced
in the mailing list
>> [email protected] <mailto:[email protected]>. If
you are not in this mailing list, we encourage you
>> to subscribe.
>>
>> Best regards
>>
>> Albert
>>
>>
>> On 05/16/2013 10:42 AM, Daniele wrote:
>>
>> Uhm.. What new release do you mean? I'm using the 0.3
versoin right now..
>>
>>
>> 2013/5/16 Albert López <[email protected]
<mailto:[email protected]>>
>>>
>>> Hi Daniele,
>>>
>>> Could you try with the new LISPmob release. Remember
to follow all the
>>> instructions of the README any check the FAQ file.
>>>
>>> Regards
>>>
>>> Albert
>>
>>
>>
