Hi Bjoern,
I have checked and at this moments you are not registered in the mapping
system so I can not tell you what could be happening. Could you let me
know when you are connected again in order I can check the routers status?
On the other hand, some month ago we rebranded the LISPmob project to
OpenOverlayRouter <http://openoverlayrouter.org/> . Would you mind to
use the new mailing lists
<https://github.com/OpenOverlayRouter/oor/wiki/Mailing-lists>? Have you
ever tried if LISPmob / OpenOverlayRouter can fits your network
requirements?
Best regards
Albert
On 18/10/16 19:35, Bjoern Franke wrote:
Hi,
I've talked to the AVM support now, it's a bug in the firmware of the
FritzBox and it will be fixed with a new release of FritzOS. The
Fritzbox sets the IPv6 of itself as the "internal IPv6" of the
exposed
host when using EIDs. When using a tunnelbroker, it sets external and
internal correctly and the traffic will be forwarded.
Another Fritzbox, another routing issue :/
Using intouch-ams-mr-ms-1 I cannot go further than the box itself,
using tdc-mr-ms there's no routing after 3 hops, e.g. to google.com:
Start: Tue Oct 18 19:31:59 2016
HOST: cardium Loss% Snt Last Avg Best Wrst
StDev
1.|--
fritz.box 0.0% 10 0.5 0.6 0.5 0.8 0.0
2.|--
2001:6c8:130:600::1 0.0% 10 48.9 49.0 48.7 49.4 0.0
3.|-- ge-0-3-9-
0.ar4tdm2nxf1.dk 0.0% 10 48.7 49.0 48.5 49.8 0.0
4.|-- kst-
peer1.sto.se.ip.tdc.n 0.0% 10 60.2 62.5 58.9 91.9 10.3
5.|--
??? 100.0 10 0.0 0.0 0.0 0.0 0.0
The way back to the box (2610:d0:21c5:cafe::1) there's nothing
reachable:
1.|--
2a00:1828:2000:899::1 0.0% 10 0.6 0.9 0.6 1.2 0.0
2.|--
2a00:1828:1000:1002::9 0.0% 10 6.6 6.6 6.6 6.8 0.0
3.|--
2a01:5c0:1:5::1 0.0% 10 5.7 6.1 5.3 7.5 0.5
4.|--
??? 100.0 10 0.0 0.0 0.0 0.0 0.0
5.|--
??? 100.0 10 0.0 0.0 0.0 0.0 0.0
6.|--
openpeering.pcextreme.nl 0.0% 10 16.2 21.6 16.1 68.9 16.6
7.|--
2a00:f10:170:152::2 0.0% 10 12.7 15.2 12.3 30.3 5.7
8.|--
2001:67c:21b4:107::b 0.0% 10 13.1 13.3 12.3 17.1 1.2
9.|--
??? 100.0 10 0.0 0.0 0.0 0.0 0.0
Maybe AVM breaks LISP with every update, in the beta-Firmware for the
7390 the LISP-section is removed from the WebGUI, but the config was
still active.
Regards
Bjoern
