Dear Gad,
Change the IP address and port numbers also for
another controller. The Ip address should match with the machine. The
Controller 2 should have the following configuration:
Controller 2 (IP is 10.0.0.118)
HA_ROLE=1
HOSTIPADDRESS=10.0.0.118
HOSTPORTNUM=8787
SERVERIPADDRESS=10.0.0.131
SERVERPORTNUM=8789
MAX_CLIENT_RETRIES=3
Regards
-Nagendra
________________________________
From: DaMiEn667 [mailto:[EMAIL PROTECTED]
Sent: Tuesday, November 06, 2007 1:05 PM
To: [email protected]; Kumar Nagendra-G20235
Subject: RE: [Users] Issues Configuring on MontaVista CGE 4.0.1
Controller 1 (IP is 10.0.0.131)
HA_ROLE=0
HOSTIPADDRESS=10.0.0.131
HOSTPORTNUM=8789
SERVERIPADDRESS=10.0.0.118
SERVERPORTNUM=8787
MAX_CLIENT_RETRIES=3
Controller 2 (IP is 10.0.0.118)
HA_ROLE=1
HOSTIPADDRESS=10.0.0.131
HOSTPORTNUM=8789
SERVERIPADDRESS=10.0.0.118
SERVERPORTNUM=8787
MAX_CLIENT_RETRIES=3
Thanks,
Gad
________________________________
From: Kumar Nagendra-G20235 [mailto:[EMAIL PROTECTED]
Sent: Monday, November 05, 2007 11:28 PM
To: DaMiEn667; [email protected]
Subject: RE: [Users] Issues Configuring on MontaVista CGE 4.0.1
Dear Gad,
Please send the details of rde_rde_config_file from
both the machines with the corresponding IP addresses and interfaces
assigned to it.
Regards
-Nagendra
________________________________
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of DaMiEn667
Sent: Monday, November 05, 2007 11:39 PM
To: [email protected]
Subject: [Users] Issues Configuring on MontaVista CGE 4.0.1
So I have downloaded, compiled, and successfully installed the following
on 2 separate machines:
net-snmp-5.4.1
tipc-1.5.12
xerces-c_2_8_0-x86-linux-gcc_3_4
opensaf-1.0-3
I have also edited slot_id, rde_rde_config_file, and nodeinit.conf on
these 2 said systems to reflect 1 being an Active Controller and the
other as a Standby.
For some reason, controller 1 comes up, and when I try to start
controller 2, the RDE service just hangs and never starts.
Here is the output from /var/opt/opensaf/stdouts/ncs_rde on controller
2.
PID file : /var/run/rde.pid
Shelf number : 2
Slot number : 2
Site number : 1
Log level : 5
Interactive mode : FALSE
rde ncs_agents_startup success
rde_fla_log_bind success
RDE INITIALIZATION FAILED: %
Here is output from /var/opt/opensaf/stdouts/ncs_rde on controller 1.
PID file : /var/run/rde.pid
Shelf number : 2
Slot number : 1
Site number : 1
Log level : 5
Interactive mode : FALSE
rde ncs_agents_startup success
rde_fla_log_bind success
RDE INITIALIZATION SUCCESS
./rde_amf.c:310: RDE_COND_AMF_INIT_DONE
./rde_amf.c:346: RDE_COND_AMF_REG_DONE
Healthcheck key: BAD8
./rde_amf.c:546: RDE_COND_AMF_HEALTH_CHK_START_DONE
./rde_amf.c:168: rde_saf_health_chk_callback invoked
safComp=CompT_SC_RDE,safSu=SuT_NCS_ND_CNTLR,safNode=SC_2_1
./rde_amf.c:174: rde_saf_health_chk_callback response sent: amf_rc 1
./rde_amf.c:175: Component Name:
safComp=CompT_SC_RDE,safSu=SuT_NCS_ND_CNTLR,safNode=SC_2_1
./rde_amf.c:125: rde_saf_CSI_set_callback invoked
safComp=CompT_SC_RDE,safSu=SuT_NCS_ND_CNTLR,safNode=SC_2_1
./rde_amf.c:131: rde_saf_CSI_set_callback response sent: amf_rc 1
./rde_amf.c:132: Component Name:
safComp=CompT_SC_RDE,safSu=SuT_NCS_ND_CNTLR,safNode=SC_2_1
./rde_amf.c:168: rde_saf_health_chk_callback invoked
safComp=CompT_SC_RDE,safSu=SuT_NCS_ND_CNTLR,safNode=SC_2_1
./rde_amf.c:174: rde_saf_health_chk_callback response sent: amf_rc 1
./rde_amf.c:175: Component Name:
safComp=CompT_SC_RDE,safSu=SuT_NCS_ND_CNTLR,safNode=SC_2_1
./rde_amf.c:168: rde_saf_health_chk_callback invoked
safComp=CompT_SC_RDE,safSu=SuT_NCS_ND_CNTLR,safNode=SC_2_1
./rde_amf.c:174: rde_saf_health_chk_callback response sent: amf_rc 1
./rde_amf.c:175: Component Name:
safComp=CompT_SC_RDE,safSu=SuT_NCS_ND_CNTLR,safNode=SC_2_1
If you need any more information that his to help me diagnose the
problem, just let me know...
Thanks in advance,
Gad
_______________________________________________
Users mailing list
[email protected]
http://list.opensaf.org/maillist/listinfo/users
