It might not be /dev/ttyUSB. Go into file explorer, look at /dev and see which new entry appears when you plug in the cable.
> On 31/03/2024 12:10 EDT Joel Leland via Users <[email protected]> > wrote: > > > I am using ZORIN PRO 17.1. I just upgraded from 15.something. Chirp was > working just fine on the 15. I'm using a BAOFENG UV-5R. I have tried 2 > different cables, which both worked before this upgrade. I am pretty sure I > am doing something wrong. That is what usually happens. I have tried > /dev/ttyUSB0 up to USB4 with no success. I could just have syntax wrong > which is usually the case. I am not real good with the command line; i.e. I > don't know a lot of commands but I do know how to get there. The attached > file will show the information on the CHIRP version. It is a screen shot > from the HELP prompt. > > What am I doing wrong? > > Thank you for your help > -- > Joel F. Leland > _______________________________________________ > Users mailing list > [email protected] > https://lists.chirpmyradio.com/postorius/lists/users.lists.chirpmyradio.com > To unsubscribe, send an email to [email protected] > To report this email as off-topic, please email > [email protected] > List archives: > https://lists.chirpmyradio.com/hyperkitty/list/[email protected]/ Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail [email protected] www http://www.ngunn.net _______________________________________________ Users mailing list [email protected] https://lists.chirpmyradio.com/postorius/lists/users.lists.chirpmyradio.com To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] List archives: https://lists.chirpmyradio.com/hyperkitty/list/[email protected]/
