On Wed, Apr 24, 2024 at 4:01 PM Chris Hart via Users <[email protected]> wrote: > > Hi! > > The data cable was supplied with the radio as a package recently by Amazon. > It is in a plastic bag labeled ‘RETEVIS’ and has serial number 2310R91291. > The bag also has the numberSKU:J9129A. > > The box that the radio was in simply says Model RT95 and has the code A9129B.
I dug mine out. It is a Retevis J9129A and has a Prolific PL2303TA chip. That should work unless the driver in macOS has been updated to add the new PL2303GS chip and remove the PL2303TA chip which is now EOL (which is the normal course of action for Prolific and their drivers). > > I have pasted below the debug.log in case that helps. Yes. It indicates that, as I expected, there are no communications happening between computer and the radio. > > The version of Chirp I am using is CHIRP next 20230710. When I select either > RT95 or RT 95 VOX it warns that this is experimental and when I click OK it > reports ’Non Initial response from radio’ > > Port used is /dev/cu.wlan-debug. I am running OS Sonoma 14.4.1 I could be wrong, but this doesn't seem like the correct port. How did you come about picking this port? Was it just one in the list? If that was the case, I would suggest that you choose "Help Me..." at the bottom of the port list and let the CHIRP-next helper walk you through the process of choosing the port to use. > > I hope this is enough detail to identify the problem. > > Your help is appreciated . > > Regards, > Chris Jim KC9HI _______________________________________________ Users mailing list [email protected] https://lists.chirpmyradio.com/postorius/lists/users.lists.chirpmyradio.com To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] List archives: https://lists.chirpmyradio.com/hyperkitty/list/[email protected]/
