On Wed, Apr 24, 2024 at 2:11 PM Jim Unroe via Users < [email protected]> wrote:
> On Wed, Apr 24, 2024 at 4:01 PM Chris Hart via Users > <[email protected]> wrote: > > > Port used is /dev/cu.wlan-debug. I am running OS Sonoma 14.4.1 > > I could be wrong, but this doesn't seem like the correct port. Jim is right, this is not the correct port. The correct port should look something like /dev/tty.usbserial-0001 instead. If you open a Terminal window and type 'ls /dev/tty*', a line like this should appear near the top of the list. Also, in a Terminal window, if you type 'ioreg -p IOUSB' (without the quotes), you should see a line corresponding to your cable. If you don't see it, type that with the cable unplugged, then type it again with the cable plugged in, and the cable should appear. If you're not seeing your cable with either of these, Jim's may be correct about the right driver not being available. Martin. KD6YAM > Chris > > Jim KC9HI > > _______________________________________________ Users mailing list [email protected] https://lists.chirpmyradio.com/postorius/lists/users.lists.chirpmyradio.com To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] List archives: https://lists.chirpmyradio.com/hyperkitty/list/[email protected]/
