Hi Reiner, I have some hints to your questions/issues.
On Fri, Jun 14, 2019 at 10:42:50 CEST, cand.med.mag.r.danner wrote: > -1- on a T400 lenovo after booting in genode a black screen which > run in a reboot loop / after three runs i shut down the system The T400 is a pre-Core-i platform using Intel Core 2 Duo CPUs and therefore is out of the range of well-tested devices. You could neverthelesse try to check the following BIOS settings and retry Sculpt CE. Security -> Memory Protection -> Execution Prevention -> Enabled If this feature is disabled the system intialization enters a reboot loop. Config -> CPU -> Virtualization Technology -> Enabled Config -> CPU -> VT-d Feature -> Enabled Unfortunately, I was also not lucky with a quick test on a dusty T400 from our recycling stack. So, I suggest you spare the time. > -2- on a X201 lenovo after booting in genode a colored screen apears > with vertical strips / the i shut down the system It's a pity that this does not work out-of-the-box as the X201 is a particularly suitable platform to start with: limited variations of models, support for virtualization and IOMMU. Could please check the following BIOS Options? Config -> CPU -> Virtualization Technology -> Enabled Config -> CPU -> VT-d Feature -> Enabled Security -> Memory Protection -> Execution Prevention -> Enabled With a X201 from our stock the Sculpt CE image works like a charm just a second ago. Greets -- Christian Helmuth Genode Labs https://www.genode-labs.com/ · https://genode.org/ https://twitter.com/GenodeLabs · /ˈdʒiː.nəʊd/ Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth _______________________________________________ Genode users mailing list [email protected] https://lists.genode.org/listinfo/users
