On Jan 15, 2007, at 10:13 AM, Marcelo Maia Garcia wrote:
I am trying to setup SGE to run DLPOLY compiled with mpif90
(OpenMPI 1.2b2, pathscale Fortran compilers and gcc c/c++). In
general I am much more luckier running DLPOLY interactively then
using SGE. The error that I got is: Signal:7 info.si_errno:0
(Success) si_code:2()[1]. A previous message in the list[2], says
that this is more likely to be a configuration problem. But what
kind of configuration? It is in the run time?
Could you include the entire stack trace next time? That can help
localize where the error is occurring. The message is saying that a
process died from a signal 7, which on Linux is a Bus Error. This
usually points to memory errors, either in Open MPI or in the user
application. Without seeing the stack trace, it's difficult to pin
down where the error is occurring.
Another error that I got sometimes is related with "writev"[3]
But this is pretty rare.
Usually these point to some process in the job dying and the other
processes having issues completing outstanding sends to the dead
process. I would guess that the problem originates with the bus
error you are seeing. Cleaning that up will likely make these errors
go away.
Brian
[1]
[ocf@master TEST2]$ mpirun -np 16 --hostfile /home/ocf/SRIFBENCH/
DLPOLY3/data/nodes_16_slots4.txt /home/ocf/SRIFBENCH/DLPOLY3/
execute/DLPOLY.Y
Signal:7 info.si_errno:0(Success) si_code:2()
Failing at addr:0x5107b0
(...)
[2] http://www.open-mpi.org/community/lists/users/2007/01/2423.php
[3]
[node007:05003] mca_btl_tcp_frag_send: writev failed with errno=104
[node007:05004] mca_btl_tcp_frag_send: writev failed with errno=104
[node006:05170] mca_btl_tcp_frag_send: writev failed with errno=104
[node007:05005] mca_btl_tcp_frag_send: writev failed with errno=104
[node007:05006] mca_btl_tcp_frag_send: writev failed with errno=104
[node006:05170] mca_btl_tcp_frag_send: writev failed with errno=104
[node006:05171] mca_btl_tcp_frag_send: writev failed with errno=104
[node006:05171] mca_btl_tcp_frag_send: writev failed with errno=104
[node006:05172] mca_btl_tcp_frag_send: writev failed with errno=104
[node006:05172] mca_btl_tcp_frag_send: writev failed with errno=104
[node006:05173] mca_btl_tcp_frag_send: writev failed with errno=104
[node006:05173] mca_btl_tcp_frag_send: writev failed with errno=104
mpirun noticed that job rank 0 with PID 0 on node node003 exited on
signal 48.
15 additional processes aborted (not shown)
_______________________________________________
users mailing list
us...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/users
--
Brian Barrett
Open MPI Team, CCS-1
Los Alamos National Laboratory
