Hello,
Have you tried with an empty DEVICE value? That should be the default
for USB.
Laurent
Le 2014/07/06 19:57 +0200, Jean-pierre Gervasoni a écrit:
Dear members,
I have set up a OmniOS box on a HP n54l. I have one issue left for now -
configuring acpupsd to drive a CyberPower CP1500EPFCLCD unit. Here is a
recap of what I did:
- Remove HID, replace by UGEN using following link:
http://www.packetmischief.ca/2013/01/01/installing-apcupsd-with-usb-support-on-omnios/
- Install pkgutil from http://www.opencsw.org/
- Install CSWapcupsd from http://www.opencsw.org/
- Configured /etc/opt/csw/apcsupsd/apcsupsd.conf to make it work with
USB (I have attached the file)
- Running apctest failed with a cryptic error message:
2014-07-06 19:32:36 apctest 3.14.10 (13 September 2011) sun
Checking configuration ...
Attached to driver: usb
sharenet.type = Network & ShareUPS Disabled
cable.type = USB Cable
mode.type = USB UPS Driver
Setting up the port ...
apctest FATAL ERROR in generic-usb.c at line 674
Cannot find UPS device --
For a link to detailed USB trouble shooting information,
please see <http://www.apcupsd.com/support.html>.
apctest error termination completed
- I am attaching apcupsd.trace file
- Here's a copy of log file when i unplug/plug the usb cable:
Jul 6 19:01:02 OmniOS genunix: [ID 408114kern.info <http://kern.info>]
/pci@0,0/pci103c,1609@12/input@5 (ugen0) removed
Jul 6 19:01:42 OmniOS usba: [ID 912658kern.info <http://kern.info>] USB 2.0
device (usb764,501) operating at full speed (USB 1.x) on USB 1.10 root hub: input@5,
ugen0 at bus address 2
Jul 6 19:01:42 OmniOS usba: [ID 349649kern.info <http://kern.info>]
CP1500EPFCLCD RJB103.551 CPS
Jul 6 19:01:42 OmniOS genunix: [ID 936769kern.info <http://kern.info>] ugen0
is /pci@0,0/pci103c,1609@12/input@5
Jul 6 19:01:42 OmniOS genunix: [ID 408114kern.info <http://kern.info>]
/pci@0,0/pci103c,1609@12/input@5 (ugen0) online
- I'm kind of lost for now.....
Thank you for any help you could provide,
Jean-Pierre
