This is indeed a good question... I have yet to find the answer ;) Le 7 juil. 2014 14:12, "Laurent Blume" <[email protected]> a écrit :
> Are you sure that specific UPS is supported by apcupsd? Can you try it > using a Linux distro? > > There's no ugen in /dev, apcupsd uses libusb to communicate, which does > not need devices. > > Laurent > > Le 2014/07/07 13:56 +0200, Jean-pierre Gervasoni a écrit: > >> Dear Laurent, >> >> Yes i first tried to use an empty value for device flag with no luck. I >> am wondering wether this may be related to the fact that i do not see >> /dev/ugen0 entry.... >> >> Best regards, >> >> Jean-Pierre >> >> Le 7 juil. 2014 13:35, "Laurent Blume" <[email protected] >> <mailto:[email protected]>> a écrit : >> >> Hello, >> >> Have you tried with an empty DEVICE value? That should be the >> default for USB. >> >> Laurent >> >> Le 2014/07/06 19:57 +0200, Jean-pierre Gervasoni a écrit: >> >> Dear members, >> >> I have set up a OmniOS box on a HP n54l. I have one issue left >> for now - >> configuring acpupsd to drive a CyberPower CP1500EPFCLCD unit. >> Here is a >> recap of what I did: >> >> - Remove HID, replace by UGEN using following link: >> >> http://www.packetmischief.ca/__2013/01/01/installing- >> apcupsd-__with-usb-support-on-omnios/ >> <http://www.packetmischief.ca/2013/01/01/installing-apcupsd- >> with-usb-support-on-omnios/> >> >> - Install pkgutil from http://www.opencsw.org/ >> >> - Install CSWapcupsd from http://www.opencsw.org/ >> >> - Configured /etc/opt/csw/apcsupsd/__apcsupsd.conf to make it >> work with >> USB (I have attached the file) >> >> - Running apctest failed with a cryptic error message: >> >> 2014-07-06 19:32:36 apctest 3.14.10 (13 September 2011) sun >> Checking configuration ... >> Attached to driver: usb >> sharenet.type = Network & ShareUPS Disabled >> cable.type = USB Cable >> mode.type = USB UPS Driver >> Setting up the port ... >> apctest FATAL ERROR in generic-usb.c at line 674 >> Cannot find UPS device -- >> For a link to detailed USB trouble shooting information, >> please see <http://www.apcupsd.com/__support.html >> <http://www.apcupsd.com/support.html>>. >> apctest error termination completed >> >> - I am attaching apcupsd.trace file >> >> - Here's a copy of log file when i unplug/plug the usb cable: >> >> Jul 6 19:01:02 OmniOS genunix: [ID 408114kern.info >> <http://408114kern.info> <http://kern.info>] >> /pci@0,0/pci103c,1609@12/__input@5 (ugen0) removed >> Jul 6 19:01:42 OmniOS usba: [ID 912658kern.info >> <http://912658kern.info> <http://kern.info>] USB 2.0 device >> (usb764,501) operating at full speed (USB 1.x) on USB 1.10 root >> hub: input@5, ugen0 at bus address 2 >> Jul 6 19:01:42 OmniOS usba: [ID 349649kern.info >> <http://349649kern.info> <http://kern.info>] CP1500EPFCLCD >> RJB103.551 CPS >> Jul 6 19:01:42 OmniOS genunix: [ID 936769kern.info >> <http://936769kern.info> <http://kern.info>] ugen0 is >> /pci@0,0/pci103c,1609@12/__input@5 >> Jul 6 19:01:42 OmniOS genunix: [ID 408114kern.info >> <http://408114kern.info> <http://kern.info>] >> /pci@0,0/pci103c,1609@12/__input@5 (ugen0) online >> >> >> - I'm kind of lost for now..... >> >> Thank you for any help you could provide, >> >> Jean-Pierre >> >> >> >> > > >
